Jump to content

Have a virus infection :part deux!


Recommended Posts

Hello,

I seem to have caught the same virus/malware as member: Yellowdot.  Luckily, his issue was resolved.  I downloaded FRST.exe. Ran it in recovery environment and have attached the files generated after the initial Scan.

I made sure to download FRST.exe to a flash drive on a clean PC, not from the infected one. and I waited until Recovery Environment was open before plugging in the flash drive to the infected PC.

  I think I need a fixlist.txt. I'd really appreciate some help.

 

Addition.txt

FRST.txt

Link to post
Share on other sites

  • 2 weeks later...

Hi Pantasticvol1 :)

My name is Aura and I'll be assisting you with your malware issue. Since we'll be working together, you can call me Aura or Yoan, which is my real name, it's up to you! Now that we've broke the ice, I'll just ask you a few things during the time we'll be working together to clean your system and get it back to an operational state.

  • As you'll notice, the logs we are asking for here are quite lenghty, so it's normal for me to not reply exactly after you post them. This is because I need some time to analyse them and then act accordingly. However, I'll always reply within 24 hours, 48 hours at most if something unexpected happens
  • As long as I'm assisting you on Malwarebytes Forums, in this thread, I'll ask you to not seek assistance anywhere else for any issue related to the system we are working on. If you have an issue, question, etc. about your computer, please ask it in this thread and I'll assist you
  • The same principle applies to any modifications you make to your system, I would like you to ask me before you do any manipulations that aren't in the instructions I posted. This is to ensure that we are operating in sync and I know exactly what's happening on your system
  • If you aren't sure about an instruction I'm giving you, ask me about it. This is to ensure that the clean-up process goes without any issue. I'll answer you and even give you more precise instructions/explanations if you need. There's no shame in asking questions here, better be safe than sorry!
  • If you don't reply to your thread within 3 days, I'll bump this thread to let you know that I'm waiting for you. If you don't reply after 5 days, it'll be closed. If you return after that period, you can send me a PM to get it unlocked and we'll continue where we left off;
  • Since malware can work quickly, we want to get rid of them as fast as we can, before they make unknown changes to the system. This being said, I would appreciate if you could reply to this thread within 24 hours of me posting. This way, we'll have a good clean-up rhythm and the chances of complications will be reduced
  • I'm against any form of pirated, illegal and counterfeit software and material. So if you have any installed on your system, I'll ask you to uninstall them right now. You don't have to tell me if you indeed had some or not, I'll give you the benefit of the doubt. Plus, this would be against Malwarebytes Forums's rules
  • In the end, you are the one asking for assistance here. So if you wish to go a different way during the clean-up, like format and reinstall Windows, you are free to do so. I would appreciate you to let me know about it first, and if you need, I can also assist you in the process
  • I would appreciate if you were to stay with me until the end, which means, until I declare your system clean. Just because your system isn't behaving weirdly anymore, or is running better than before, it doesn't mean that the infection is completely gone
    This being said, I have a full time job so sometimes it'll take longer for me to reply to you. Don't worry, you'll be my first priority as soon as I get home and have time to look at your thread


This being said, it's time to clean-up some malware, so let's get started, shall we? :)

Follow the instructions in the thread below. Make sure to download the MBAR version linked in it. Let me know if you're not able to launch it and run a scan.
 
https://forums.malwarebytes.com/topic/198907-requested-resource-is-in-use-error-unable-to-start-malwarebytes/
 
If you manage to run a scan, delete everything it finds, and then copy/paste the content of the mbar-log-DATE-(TIME).txt log that is located in the MBAR folder here after. 

Link to post
Share on other sites

Hum... Alright. We'll have to use FRST in the RE. Launch FRST and copy/paste the following inside the text area. Once done, click on the Fix button. A file called fixlog.txt should appear on your desktop afterwards. Attach it here.

Start::
CMD: bcdedit.exe /set {bootmgr} displaybootmenu yes
CMD: bcdedit.exe /set {default} recoveryenabled yes
CMD: fltmc instances
CMD: dir C:\Windows\system32\drivers
End::

 

Link to post
Share on other sites

Ok. Just wanted to detail my steps in order to make sure all was done correctly.  I downloaded FRST on a clean computer on to a clean USB drive.  I than booted the infected computer in RE with Command Prompts.  Once the infected pc was booted I plugged the USB and ran FRST,  pasted the text you provided, and hit fix.  Here is the .txt it generated.

Fixlog.txt

Link to post
Share on other sites

You weren't in the RE, but in Safe Mode.

Boot Mode: Safe Mode (minimal)

Now, you should be able to access the Windows RE because of the FRST fix you just ran. And you need to download FRST from a clean computer, and move it on your USB Flash Drive, and it cannot be connected on the infected computer unless it is either shutdown, or in the Windows RE.

iO3R662.pngFarbar Recovery Scan Tool (FRST) - Recovery Environment Scan
Follow the instructions below to download and execute a scan on your system with FRST from the Recovery Environment, and provide the logs in your next reply.

Item(s) required:

  • USB Flash Drive (size depend on if you have to create a USB Recovery or Installation media)
  • CD/DVD (optional: only needed if you need to create a Recovery or Installation media and your USB Flash Drive is too small)
  • Another computer (optional: only needed if you cannot work from the infected computer directly)

Preparing the USB Flash Drive

  • Download the right version of FRST for your system:
  • Move the executable (FRST.exe or FRST64.exe) on your USB Flash Drive

Boot in the Recovery Environment

  • Plug your USB Flash Drive in the infected computer
  • To enter the Recovery Environment with Windows Vista and Windows 7, follow the instructions below:
    • Restart the computer
    • Once you've seen your BIOS splashscreen (the computer manufacturer logo), tap the F8 key repeatedly until the Advanced Boot Options menu appears
    • Use the arrow keys to select Repair your computer, and press on Enter
    • Select your keyboard layout (US, French, etc.) and click on Next
    • Click on Command Prompt to open the command prompt
      Note:If you can't access the Recovery Environment using the F8 method above, you'll need to create a Windows installation or repair media. It can be made on the computer itself or another one running the same version of Windows as the one you plan to use it on. For more information, check out this tutorial on SevenForums.
  • To enter the Recovery Environment with Windows 8 or Windows 8.1, follow the instructions in this tutorial on EightForums
    Note:If you can't access the Recovery Environment using the method above, you'll need to create a Windows installation or repair media. It can be made on the computer itself or another one running the same version of Windows as the one you plan to use it on. For more information, check out this tutorial.
  • To enter the Recovery Environment with Windows 10, follow the instructions in this tutorial on TenForums
    Note:If you can't access the Recovery Environment using the method above, you'll need to create a Windows installation or repair media. It can be made on the computer itself or another one running the same version of Windows as the one you plan to use it on. For more information, check out this tutorial on TenForums.

Once in the command prompt

  • In the command prompt, type notepad and press on Enter
  • Notepad will open. Click on the File menu and select Open
  • Click on Computer/This PC, find the letter for your USB Flash Drive, then close the window and Notepad
  • In the command prompt, type e:\frst.exe (for the x64 version, type e:\frst64.exe and press on Enter
  • Note: Replace the letter e with the drive letter of your USB Flash Drive
  • FRST will open
  • Click on Yes to accept the disclaimer
  • Click on the Scan button and wait for the scan to complete
  • A log called FRST.txt will be saved on your USB Flash Drive. Attach it in your next reply

 

Link to post
Share on other sites

Awesome! Now you should be able to boot normally into Windows and run a scan with Malwarebytes.

j1Bynr2.pngMalwarebytes - Clean Mode

  • Download and install the free version of Malwarebytes
    Note: If you have Malwarebytes already installed, you don't need to install it again. Simply start from the next bullet point
  • Once Malwarebytes is installed, launch it and let it update his database. You might have to click on the little arrow by Scan Status in the middle right pane for it to do so
  • Once the database update is complete, click on the Scan tab, then select the Threat Scan button and click on Start Scan
  • Let the scan run, the time required to complete the scan depends of your system and computer specs
  • Once the scan is complete, make sure that the first checkbox at the top is checked (which will automatically check every detected item), then click on the Quarantine Selected button
    • If it asks you to restart your computer to complete the removal, do so
  • Click on Export Summary after the deletion (in the bottom-left corner) and select Copy to Clipboard. Paste the content in your next reply

Link to post
Share on other sites

Malwarebytes
www.malwarebytes.com

-Log Details-
Scan Date: 1/21/18
Scan Time: 5:22 PM
Log File: a0a7c4a2-fef9-11e7-af22-00fff539eb2a.json
Administrator: Yes

-Software Information-
Version: 3.3.1.2183
Components Version: 1.0.262
Update Package Version: 1.0.3750
License: Premium

-System Information-
OS: Windows 8.1
CPU: x64
File System: NTFS
User: WINDOWS-A533KSL\Jonathan

-Scan Summary-
Scan Type: Threat Scan
Result: Completed
Objects Scanned: 370623
Threats Detected: 0
(No malicious items detected)
Threats Quarantined: 0
(No malicious items detected)
Time Elapsed: 45 min, 29 sec

-Scan Options-
Memory: Enabled
Startup: Enabled
Filesystem: Enabled
Archives: Enabled
Rootkits: Enabled
Heuristics: Enabled
PUP: Detect
PUM: Detect

-Scan Details-
Process: 0
(No malicious items detected)

Module: 0
(No malicious items detected)

Registry Key: 0
(No malicious items detected)

Registry Value: 0
(No malicious items detected)

Registry Data: 0
(No malicious items detected)

Data Stream: 0
(No malicious items detected)

Folder: 0
(No malicious items detected)

File: 0
(No malicious items detected)

Physical Sector: 0
(No malicious items detected)


(end)

Link to post
Share on other sites

Good :) Now let's do a sweep with AdwCleaner and RogueKiller.

zcMPezJ.pngAdwCleaner - Fix Mode

  • Download AdwCleaner and move it to your Desktop
  • Right-click on AdwCleaner.exe and select Spcusrh.pngRun as Administrator (for Windows Vista, 7, 8, 8.1 and 10 users)
  • Accept the EULA (I accept), then click on Scan
  • Let the scan complete. Once it's done, make sure that every item listed in the different tabs is checked and click on the Clean button. This will kill all active processes
    V7SD4El.png
  • Once the cleaning process is complete, AdwCleaner will ask to restart your computer, do it
  • After the restart, a log will open when logging in. Please copy/paste the content of that log in your next reply

RQKuhw1.pngRogueKiller

  • Download the right version of RogueKiller for your Windows version (32 or 64-bit)
  • Once done, move the executable file to your Desktop, right-click on it and select Spcusrh.pngRun as Administrator (for Windows Vista, 7, 8, 8.1 and 10 users)
  • Click on the Start Scan button in the right panel, which will bring you to another tab, and click on it again (this time it'll be in the bottom right corner)
  • Wait for the scan to complete
  • On completion, the results will be displayed
  • Check every single entry (threat found), and click on the Remove Selected button
  • On completion, the results will be displayed. Click on the Open Report button in the bottom left corner, followed by the Open TXT button (also in the bottom left corner)
  • This will open the report in Notepad. Copy/paste its content in your next reply

Your next reply(ies) should therefore contain:

  • Copy/pasted AdwCleaner clean log
  • Copy/pasted RogueKiller clean log

Link to post
Share on other sites

After downloading adwcleaner, I moved it to the desktop,  right clicked and hit "run as administrator". I hit " I accept" and then "scan". About 45 seconds into the scan the program just closes itself. It was right after it finished  "scanning registry".  Just poof its gone.  So I right click the program again, run as administrator, accept and run scan. Same issue, less than a minute into the scan program closes itself without completion. 

Link to post
Share on other sites

Almost done!

iO3R662.pngFarbar Recovery Scan Tool (FRST) - Fix mode
Follow the instructions below to execute a fix on your system using FRST, and provide the log in your next reply.

  • Download the attached fixlist.txt file, and save it on your Desktop (or wherever your FRST.exe/FRST64.exe executable is located)
  • Right-click on the FRST executable and select Spcusrh.pngRun as Administrator (for Windows Vista, 7, 8, 8.1 and 10 users)
  • Click on the Fix button
    NYA5Cbr.png
  • On completion, a message will come up saying that the fix has been completed and it'll open a log in Notepad
  • Copy and paste its content in your next reply

How's your system behaving now? Are there any other issues to address?

fixlist.txt

Link to post
Share on other sites

Due to the lack of feedback, this topic is closed to prevent others from posting here.

If you need this topic reopened, please send a Private Message to any one of the moderating team members. Please include a link to this topic with your request.

This applies only to the originator of this topic. Other members who need assistance please start your own topic in a new thread.

Thanks

 

Link to post
Share on other sites

Guest
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
Back to top
×
×
  • Create New...

Important Information

This site uses cookies - We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.