Jump to content

web shield not enabling

h3xkkore

By h3xkkore
in Resolved Malware Removal Logs

 Share

Recommended Posts

h3xkkore

h3xkkore

Posted
Posted

on premium trial and the web shield isnt turning on. keep getting notification to turn on from MB but when i try it turns right back off. also it didnt remove 10 detected infections. Furthermore i had to manually go in to certificates and delete unauthorized certificates to install the progrom even though ive never installed on this machine before. kinda not a good impression so far but i will say kudos on the other 107 detection and removal of malware and pups. anyways please help?

Link to post
Share on other sites
Porthos

Porthos

Posted
Posted
4 hours ago, h3xkkore said:

anyways please help?

Let's try and get some logs first so the team can review them and see if they can tell what may be causing your issues....

  1. FIRST: Create and obtain Farbar Recovery Scan Tool (FRST) logs
  2. Download FRST and save it to your desktop. Tell any program that blocks it to ignore or allow. It IS SAFE. It contains no info that can identify or harm you.
  3. NOTE: You need to run the version compatible with your system. You can check here if you're not sure if your computer is 32-bit or 64-bit
  4. Double-click to run FRST and when the tool opens click "Yes" to the disclaimer
  5. Press the "Scan" button
  6. This will produce two files in the same location (directory) as FRST: FRST.txt and Addition.txt
    NOTE: These two files will be collected by the MB-Check Tool and added to the zip file for you
  7. NEXT: Create and obtain an mb-check log
  8. Download MB-Check and save to your desktop
  9. Double-click to run MB-Check and within a few second the command window will open, then click "OK"
  10. This will produce one log file on your desktop: mb-check-results.zip
  11. Attach this file to your forum post by clicking on the "Drag files here to attach, or choose files..." or simply drag the file to the attachment area
Link to post
Share on other sites
Porthos

Porthos

Posted
Posted (edited)
13 hours ago, h3xkkore said:

Furthermore i had to manually go in to certificates and delete unauthorized certificates to install the progrom

Follow the instructions in the thread below. Make sure to download the MBAR version linked in it. Let me know if you're not able to launch it and run a scan.
 
https://forums.malwarebytes.com/topic/198907-requested-resource-is-in-use-error-unable-to-start-malwarebytes/
 
If you manage to run a scan, delete everything it finds, and then copy/paste the content of the mbar-log-DATE-(TIME).txt log that is located in the MBAR folder here after. 

@Aura

Edited by Porthos
Link to post
Share on other sites
Aura

Aura

Posted
Posted

Hi h3xkkore :)

My name is Aura and I'll be assisting you with your malware issue. Since we'll be working together, you can call me Aura or Yoan, which is my real name, it's up to you! Now that we've broke the ice, I'll just ask you a few things during the time we'll be working together to clean your system and get it back to an operational state.

  • As you'll notice, the logs we are asking for here are quite lenghty, so it's normal for me to not reply exactly after you post them. This is because I need some time to analyse them and then act accordingly. However, I'll always reply within 24 hours, 48 hours at most if something unexpected happens
  • As long as I'm assisting you on Malwarebytes Forums, in this thread, I'll ask you to not seek assistance anywhere else for any issue related to the system we are working on. If you have an issue, question, etc. about your computer, please ask it in this thread and I'll assist you
  • The same principle applies to any modifications you make to your system, I would like you to ask me before you do any manipulations that aren't in the instructions I posted. This is to ensure that we are operating in sync and I know exactly what's happening on your system
  • If you aren't sure about an instruction I'm giving you, ask me about it. This is to ensure that the clean-up process goes without any issue. I'll answer you and even give you more precise instructions/explanations if you need. There's no shame in asking questions here, better be safe than sorry!
  • If you don't reply to your thread within 3 days, I'll bump this thread to let you know that I'm waiting for you. If you don't reply after 5 days, it'll be closed. If you return after that period, you can send me a PM to get it unlocked and we'll continue where we left off;
  • Since malware can work quickly, we want to get rid of them as fast as we can, before they make unknown changes to the system. This being said, I would appreciate if you could reply to this thread within 24 hours of me posting. This way, we'll have a good clean-up rhythm and the chances of complications will be reduced
  • I'm against any form of pirated, illegal and counterfeit software and material. So if you have any installed on your system, I'll ask you to uninstall them right now. You don't have to tell me if you indeed had some or not, I'll give you the benefit of the doubt. Plus, this would be against Malwarebytes Forums's rules
  • In the end, you are the one asking for assistance here. So if you wish to go a different way during the clean-up, like format and reinstall Windows, you are free to do so. I would appreciate you to let me know about it first, and if you need, I can also assist you in the process
  • I would appreciate if you were to stay with me until the end, which means, until I declare your system clean. Just because your system isn't behaving weirdly anymore, or is running better than before, it doesn't mean that the infection is completely gone
    This being said, I have a full time job so sometimes it'll take longer for me to reply to you. Don't worry, you'll be my first priority as soon as I get home and have time to look at your thread


This being said, it's time to clean-up some malware, so let's get started, shall we? :)

Follow Porthos' instructions, as I'll wait for that log before we move on.

Link to post
Share on other sites
Aura

Aura

Posted
Posted

Yes, once in the Windows RE. launch the command prompt and access FRST. Once open, click on the Scan button. After the scan, restart your computer normally, and provide me the FRST.txt log that will be on the USB. Here are the full instructions if needed.

iO3R662.pngFarbar Recovery Scan Tool (FRST) - Recovery Environment Scan
Follow the instructions below to download and execute a scan on your system with FRST from the Recovery Environment, and provide the logs in your next reply.

Item(s) required:

  • USB Flash Drive (size depend on if you have to create a USB Recovery or Installation media)
  • CD/DVD (optional: only needed if you need to create a Recovery or Installation media and your USB Flash Drive is too small)
  • Another computer (optional: only needed if you cannot work from the infected computer directly)

Preparing the USB Flash Drive

  • Download the right version of FRST for your system:
    • FRST 32-bit
    • FRST 64-bit
      Note: Only the right version will run on your system, the other will throw an error message. So if you don't know what your system's version is, simply download both of them, and the one that works is the one you should be using.
  • Move the executable (FRST.exe or FRST64.exe) on your USB Flash Drive

Boot in the Recovery Environment

  • Plug your USB Flash Drive in the infected computer
  • To enter the Recovery Environment with Windows Vista and Windows 7, follow the instructions below:
    • Restart the computer
    • Once you've seen your BIOS splashscreen (the computer manufacturer logo), tap the F8 key repeatedly until the Advanced Boot Options menu appears
    • Use the arrow keys to select Repair your computer, and press on Enter
    • Select your keyboard layout (US, French, etc.) and click on Next
    • Click on Command Prompt to open the command prompt
      Note:If you can't access the Recovery Environment using the F8 method above, you'll need to create a Windows installation or repair media. It can be made on the computer itself or another one running the same version of Windows as the one you plan to use it on. For more information, check out this tutorial on SevenForums.
  • To enter the Recovery Environment with Windows 8 or Windows 8.1, follow the instructions in this tutorial on EightForums
    Note:If you can't access the Recovery Environment using the method above, you'll need to create a Windows installation or repair media. It can be made on the computer itself or another one running the same version of Windows as the one you plan to use it on. For more information, check out this tutorial.
  • To enter the Recovery Environment with Windows 10, follow the instructions in this tutorial on TenForums
    Note:If you can't access the Recovery Environment using the method above, you'll need to create a Windows installation or repair media. It can be made on the computer itself or another one running the same version of Windows as the one you plan to use it on. For more information, check out this tutorial on TenForums.

Once in the command prompt

  • In the command prompt, type notepad and press on Enter
  • Notepad will open. Click on the File menu and select Open
  • Click on Computer/This PC, find the letter for your USB Flash Drive, then close the window and Notepad
  • In the command prompt, type e:\frst.exe (for the x64 version, type e:\frst64.exe and press on Enter
  • Note: Replace the letter e with the drive letter of your USB Flash Drive
  • FRST will open
  • Click on Yes to accept the disclaimer
  • Click on the Scan button and wait for the scan to complete
  • A log called FRST.txt will be saved on your USB Flash Drive. Attach it in your next reply

Link to post
Share on other sites
h3xkkore

h3xkkore

Posted
  • Author
Posted

Ok well I'm at a loss of what to do now.  I got into the RE using a windows iso on my usb drive. But I only have the 1 usb drive and if I put FRST on it with the windows bootable iso it won't boot to it... just black screen with a flashing underscore and my DVD burner doesn't seem to be working Idk if it's a hardware problem or the infection is causing it to be unable to burn.

Link to post
Share on other sites
Guest
This topic is now closed to further replies.
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.
Back to top
×
×
  • Create New...

Important Information

This site uses cookies - We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.