Jump to content

Requested Resource is in Use Error - Could not Load DDA Driver


ikeh
 Share

Recommended Posts

Hey and thanks in advance for any help you can provide.  I am unable to run malware bytes at all due to the resource in use error.  If I try to follow the instructions provided for that error I am unable to load the DDA Driver. 

I have attached the FRST.txt and addition.txt files.  Please let me know what else you need.  Thanks again.

Addition.txt

FRST.txt

Link to post
Share on other sites

Hi ikeh :)

My name is Aura and I'll be assisting you with your malware issue. Since we'll be working together, you can call me Aura or Yoan, which is my real name, it's up to you! Now that we've broke the ice, I'll just ask you a few things during the time we'll be working together to clean your system and get it back to an operational state.

  • As you'll notice, the logs we are asking for here are quite lenghty, so it's normal for me to not reply exactly after you post them. This is because I need some time to analyse them and then act accordingly. However, I'll always reply within 24 hours, 48 hours at most if something unexpected happens
  • As long as I'm assisting you on Malwarebytes Forums, in this thread, I'll ask you to not seek assistance anywhere else for any issue related to the system we are working on. If you have an issue, question, etc. about your computer, please ask it in this thread and I'll assist you
  • The same principle applies to any modifications you make to your system, I would like you to ask me before you do any manipulations that aren't in the instructions I posted. This is to ensure that we are operating in sync and I know exactly what's happening on your system
  • If you aren't sure about an instruction I'm giving you, ask me about it. This is to ensure that the clean-up process goes without any issue. I'll answer you and even give you more precise instructions/explanations if you need. There's no shame in asking questions here, better be safe than sorry!
  • If you don't reply to your thread within 3 days, I'll bump this thread to let you know that I'm waiting for you. If you don't reply after 5 days, it'll be closed. If you return after that period, you can send me a PM to get it unlocked and we'll continue where we left off;
  • Since malware can work quickly, we want to get rid of them as fast as we can, before they make unknown changes to the system. This being said, I would appreciate if you could reply to this thread within 24 hours of me posting. This way, we'll have a good clean-up rhythm and the chances of complications will be reduced
  • I'm against any form of pirated, illegal and counterfeit software and material. So if you have any installed on your system, I'll ask you to uninstall them right now. You don't have to tell me if you indeed had some or not, I'll give you the benefit of the doubt. Plus, this would be against Malwarebytes Forums's rules
  • In the end, you are the one asking for assistance here. So if you wish to go a different way during the clean-up, like format and reinstall Windows, you are free to do so. I would appreciate you to let me know about it first, and if you need, I can also assist you in the process
  • I would appreciate if you were to stay with me until the end, which means, until I declare your system clean. Just because your system isn't behaving weirdly anymore, or is running better than before, it doesn't mean that the infection is completely gone
    This being said, I have a full time job so sometimes it'll take longer for me to reply to you. Don't worry, you'll be my first priority as soon as I get home and have time to look at your thread


This being said, it's time to clean-up some malware, so let's get started, shall we? :)

Do you have a USB Flash Drive? If so, how big is it?

Also, follow the instructions below.

iO3R662.pngFarbar Recovery Scan Tool (FRST) - Fix mode
Follow the instructions below to execute a fix on your system using FRST, and provide the log in your next reply.

  • Download the attached fixlist.txt file, and save it on your Desktop (or wherever your FRST.exe/FRST64.exe executable is located)
  • Right-click on the FRST executable and select Spcusrh.pngRun as Administrator (for Windows Vista, 7, 8, 8.1 and 10 users)
  • Click on the Fix button
    NYA5Cbr.png
  • On completion, a message will come up saying that the fix has been completed and it'll open a log in Notepad
  • A file called fixlog.txt will be on your desktop. Attach it here so I can review it


 

fixlist.txt

Link to post
Share on other sites

8GB should be enough :) And for now the fun part.

iO3R662.pngFarbar Recovery Scan Tool (FRST) - Recovery Environment Scan
Follow the instructions below to download and execute a scan on your system with FRST from the Recovery Environment, and provide the logs in your next reply.

Item(s) required:

  • USB Flash Drive (size depend on if you have to create a USB Recovery or Installation media)
  • CD/DVD (optional: only needed if you need to create a Recovery or Installation media and your USB Flash Drive is too small)
  • Another computer (optional: only needed if you cannot work from the infected computer directly)

Preparing the USB Flash Drive

  • Download the right version of FRST for your system:
  • Move the executable (FRST.exe or FRST64.exe) on your USB Flash Drive
  • Download the attached fixlist.txt, and move it on your USB Flash Drive as well

Boot in the Recovery Environment

  • Plug your USB Flash Drive in the infected computer
  • To enter the Recovery Environment with Windows Vista and Windows 7, follow the instructions below:
    • Restart the computer
    • Once you've seen your BIOS splashscreen (the computer manufacturer logo), tap the F8 key repeatedly until the Advanced Boot Options menu appears
    • Use the arrow keys to select Repair your computer, and press on Enter
    • Select your keyboard layout (US, French, etc.) and click on Next
    • Click on Command Prompt to open the command prompt
      Note:If you can't access the Recovery Environment using the F8 method above, you'll need to create a Windows installation or repair media. It can be made on the computer itself or another one running the same version of Windows as the one you plan to use it on. For more information, check out this tutorial on SevenForums.
  • To enter the Recovery Environment with Windows 8 or Windows 8.1, follow the instructions in this tutorial on EightForums
    Note:If you can't access the Recovery Environment using the method above, you'll need to create a Windows installation or repair media. It can be made on the computer itself or another one running the same version of Windows as the one you plan to use it on. For more information, check out this tutorial.
  • To enter the Recovery Environment with Windows 10, follow the instructions in this tutorial on TenForums
    Note:If you can't access the Recovery Environment using the method above, you'll need to create a Windows installation or repair media. It can be made on the computer itself or another one running the same version of Windows as the one you plan to use it on. For more information, check out this tutorial on TenForums.

Once in the command prompt

  • In the command prompt, type notepad and press on Enter
  • Notepad will open. Click on the File menu and select Open
  • Click on Computer/This PC, find the letter for your USB Flash Drive, then close the window and Notepad
  • In the command prompt, type e:\frst.exe (for the x64 version, type e:\frst64.exe and press on Enter
  • Note: Replace the letter e with the drive letter of your USB Flash Drive
  • FRST will open
  • Click on Yes to accept the disclaimer
  • Click on the Fix button and wait for the scan to complete
  • A log called fixlog.txt will be saved on your USB Flash Drive. Attach it in your next reply

Link to post
Share on other sites

Oh wait, I had forgotten to attach the fixlist.txt you were supposed to used. Please go back in the Recovery Environment and run this one. Delete the fixlog.txt from your USB Flash Drive, download the attached fixlist.txt, move it on your USB and go back in the RE run the FRST fix.

fixlist.txt

Link to post
Share on other sites

I am unable to get into the Recovery Environment.  I have used all the methods provided in the link you gave, and tried every method here: https://technet.microsoft.com/en-us/library/Hh825173.aspx

No matter what I do my PC restarts and goes immediately back to my sign-in screen after the restart.  Unsure if it's something with my boot, or with my windows installation, or if it's the malware.  I have spent the past hour trying a variety of googled ideas.  Any suggestions?

Link to post
Share on other sites

I have spent most of today and yesterday and at this point I'm just going to reformat and reinstall windows.  I have all my important files and it's been too long anyways.  Thanks again for your help it was very appreciated.  Feel free to close this thread.

Link to post
Share on other sites

No problem ikeh, sorry that I wasn't able to help you remove this infection completely. Just so you know, the Premium version of Malwarebytes protects against it, shall you ever consider getting it in the future.

Stay safe :) 

Link to post
Share on other sites

Guest
This topic is now closed to further replies.
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
Back to top
×
×
  • Create New...

Important Information

This site uses cookies - We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.