Jump to content

"The requested resource is in use"


Recommended Posts

I'm trying to fix some of the viruses on my computer, they shouldn't be this hard. I haven't been able to open task manager because it always crashes on startup. Also, whenever I try to run RKill, Malwarebytes, the Malwayrebytes Anit-Rootkit, it pops up with "The requested resource is in use" with a directory of the executable. This would be way easier if I could start software, but anything relating to anti-virus/malware removal won't launch. Any suggestions? I've tried a lot.

Link to post
Share on other sites

  • Replies 52
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Hi Harmazi :)

My name is Aura and I'll be assisting you with your malware issue. Since we'll be working together, you can call me Aura or Yoan, which is my real name, it's up to you! Now that we've broke the ice, I'll just ask you a few things during the time we'll be working together to clean your system and get it back to an operational state.

  • As you'll notice, the logs we are asking for here are quite lenghty, so it's normal for me to not reply exactly after you post them. This is because I need some time to analyse them and then act accordingly. However, I'll always reply within 24 hours, 48 hours at most if something unexpected happens
  • As long as I'm assisting you on Malwarebytes Forums, in this thread, I'll ask you to not seek assistance anywhere else for any issue related to the system we are working on. If you have an issue, question, etc. about your computer, please ask it in this thread and I'll assist you
  • The same principle applies to any modifications you make to your system, I would like you to ask me before you do any manipulations that aren't in the instructions I posted. This is to ensure that we are operating in sync and I know exactly what's happening on your system
  • If you aren't sure about an instruction I'm giving you, ask me about it. This is to ensure that the clean-up process goes without any issue. I'll answer you and even give you more precise instructions/explanations if you need. There's no shame in asking questions here, better be safe than sorry!
  • If you don't reply to your thread within 3 days, I'll bump this thread to let you know that I'm waiting for you. If you don't reply after 5 days, it'll be closed. If you return after that period, you can send me a PM to get it unlocked and we'll continue where we left off;
  • Since malware can work quickly, we want to get rid of them as fast as we can, before they make unknown changes to the system. This being said, I would appreciate if you could reply to this thread within 24 hours of me posting. This way, we'll have a good clean-up rhythm and the chances of complications will be reduced
  • I'm against any form of pirated, illegal and counterfeit software and material. So if you have any installed on your system, I'll ask you to uninstall them right now. You don't have to tell me if you indeed had some or not, I'll give you the benefit of the doubt. Plus, this would be against Malwarebytes Forums's rules
  • In the end, you are the one asking for assistance here. So if you wish to go a different way during the clean-up, like format and reinstall Windows, you are free to do so. I would appreciate you to let me know about it first, and if you need, I can also assist you in the process
  • I would appreciate if you were to stay with me until the end, which means, until I declare your system clean. Just because your system isn't behaving weirdly anymore, or is running better than before, it doesn't mean that the infection is completely gone
    This being said, I have a full time job so sometimes it'll take longer for me to reply to you. Don't worry, you'll be my first priority as soon as I get home and have time to look at your thread


This being said, it's time to clean-up some malware, so let's get started, shall we? :)

Follow the instructions in the thread below. Make sure to download the MBAR version linked in it. Let me know if you're not able to launch it and run a scan.
 
https://forums.malwarebytes.com/topic/198907-requested-resource-is-in-use-error-unable-to-start-malwarebytes/
 
If you manage to run a scan, delete everything it finds, and then copy/paste the content of the "mbar-log-TODAY'S-DATE.txt" log that is located in the MBAR folder here after. 

Link to post
Share on other sites

Good :) Now you should be able to install and run a scan with Malwarebytes.

j1Bynr2.pngMalwarebytes - Clean Mode

  • Download and install the free version of Malwarebytes
    Note: If you have Malwarebytes already installed, you don't need to install it again. Simply start from the next bullet point
  • Once Malwarebytes is installed, launch it and let it update his database. You might have to click on the little arrow by Scan Status in the middle right pane for it to do so
  • Once the database update is complete, click on the Scan tab, then select the Threat Scan button and click on Start Scan
  • Let the scan run, the time required to complete the scan depends of your system and computer specs
  • Once the scan is complete, make sure that the first checkbox at the top is checked (which will automatically check every detected item), then click on the Quarantine Selected button
    • If it asks you to restart your computer to complete the removal, do so
  • Click on Export Summary after the deletion (in the bottom-left corner) and select Copy to Clipboard. Paste the content in your next reply

Link to post
Share on other sites

Please do so, as we'll need it. First, we need to restore access to the Recovery Environment.

iO3R662.pngFarbar Recovery Scan Tool (FRST) - Fix mode
Follow the instructions below to execute a fix on your system using FRST, and provide the log in your next reply.

  • Download the right version of FRST for your system:
  • Download the attached fixlist.txt file, and save it on your Desktop (or wherever your FRST.exe/FRST64.exe executable is located)
  • Right-click on the FRST executable and select Spcusrh.pngRun as Administrator (for Windows Vista, 7, 8, 8.1 and 10 users)
  • Click on the Fix button
    NYA5Cbr.png
  • On completion, a message will come up saying that the fix has been completed and it'll open a log in Notepad
  • Copy and paste its content in your next reply

fixlist.txt

Link to post
Share on other sites

Fix result of Farbar Recovery Scan Tool (x64) Version: 12-08-2017
Ran by RNOwe (14-08-2017 20:05:28) Run:1
Running from C:\Users\Ricky\Desktop\FRST
Loaded Profiles: RNOwe & Ricky (Available Profiles: RNOwe & Ricky)
Boot Mode: Normal
==============================================

fixlist content:
*****************
CMD: bcdedit.exe /set {bootmgr} displaybootmenu yes
CMD: bcdedit.exe /set {default} recoveryenabled yes
*****************


========= bcdedit.exe /set {bootmgr} displaybootmenu yes =========

The operation completed successfully.

========= End of CMD: =========


========= bcdedit.exe /set {default} recoveryenabled yes =========

The operation completed successfully.

========= End of CMD: =========


==== End of Fixlog 20:05:29 ====

Link to post
Share on other sites

Good :)

iO3R662.pngFarbar Recovery Scan Tool (FRST) - Recovery Environment Scan
Follow the instructions below to download and execute a scan on your system with FRST from the Recovery Environment, and provide the logs in your next reply.

Item(s) required:

  • USB Flash Drive (size depend on if you have to create a USB Recovery or Installation media)
  • CD/DVD (optional: only needed if you need to create a Recovery or Installation media and your USB Flash Drive is too small)
  • Another computer (optional: only needed if you cannot work from the infected computer directly)

Preparing the USB Flash Drive

  • Download the right version of FRST for your system:
  • Move the executable (FRST.exe or FRST64.exe) on your USB Flash Drive

Boot in the Recovery Environment

  • Plug your USB Flash Drive in the infected computer
  • To enter the Recovery Environment with Windows Vista and Windows 7, follow the instructions below:
    • Restart the computer
    • Once you've seen your BIOS splashscreen (the computer manufacturer logo), tap the F8 key repeatedly until the Advanced Boot Options menu appears
    • Use the arrow keys to select Repair your computer, and press on Enter
    • Select your keyboard layout (US, French, etc.) and click on Next
    • Click on Command Prompt to open the command prompt
      Note:If you can't access the Recovery Environment using the F8 method above, you'll need to create a Windows installation or repair media. It can be made on the computer itself or another one running the same version of Windows as the one you plan to use it on. For more information, check out this tutorial on SevenForums.
  • To enter the Recovery Environment with Windows 8 or Windows 8.1, follow the instructions in this tutorial on EightForums
    Note:If you can't access the Recovery Environment using the method above, you'll need to create a Windows installation or repair media. It can be made on the computer itself or another one running the same version of Windows as the one you plan to use it on. For more information, check out this tutorial.
  • To enter the Recovery Environment with Windows 10, follow the instructions in this tutorial on TenForums
    Note:If you can't access the Recovery Environment using the method above, you'll need to create a Windows installation or repair media. It can be made on the computer itself or another one running the same version of Windows as the one you plan to use it on. For more information, check out this tutorial on TenForums.

Once in the command prompt

  • In the command prompt, type notepad and press on Enter
  • Notepad will open. Click on the File menu and select Open
  • Click on Computer/This PC, find the letter for your USB Flash Drive, then close the window and Notepad
  • In the command prompt, type e:\frst.exe (for the x64 version, type e:\frst64.exe and press on Enter
  • Note: Replace the letter e with the drive letter of your USB Flash Drive
  • FRST will open
  • Click on Yes to accept the disclaimer
  • Click on the Scan button and wait for the scan to complete
  • A log called FRST.txt will be saved on your USB Flash Drive. Attach it in your next reply

Link to post
Share on other sites

All good :) Technically, this fix should work, but since it's a new variant, we'll see what it gives. It'll delete most files and folders related to the infection, but I don't know if they'll be regenerated on restart. However, we won't know until we try :)

Download the attached fixlist.txt, and move it on your USB Flash Drive as well, then you'll have to go back in the Recovery Environment.

Once in the command prompt

  • In the command prompt, type notepad and press on Enter
  • Notepad will open. Click on the File menu and select Open
  • Click on Computer/This PC, find the letter for your USB Flash Drive, then close the window and Notepad
  • In the command prompt, type e:\frst.exe (for the x64 version, type e:\frst64.exe and press on Enter
  • Note: Replace the letter e with the drive letter of your USB Flash Drive
  • FRST will open
  • Click on Yes to accept the disclaimer
  • Click on the Fix button and wait for the scan to complete
  • A log called fixlog.txt will be saved on your USB Flash Drive. Attach it in your next reply

fixlist.txt

Link to post
Share on other sites

Guest
This topic is now closed to further replies.
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

Back to top
×
×
  • Create New...

Important Information

This site uses cookies - We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.