Jump to content

Recommended Posts

Please help?  I can't open Malwarebytes, and have tried using the chameleon to do so. I've tried to figure it out myself but I am not doing something right. I know I have these problem files:
Service Found: Dataup
Service Found:  windowsmanagementservice
Service Found:  NetUtils2016
Service Found:  drmkpro64
Service Found:  dataup

I have attached the logs from FRST.

Addition.txt

FRST.txt

Link to post
Share on other sites

Hello Ladelthia and welcome to Malwarebytes,

1.Download Malwarebytes Anti-Rootkit from this link:

 http://www.malwarebytes.org/products/mbar/

2. Unzip the File to a convenient location. (Recommend the Desktop)
3. Open the folder where the contents were unzipped to run mbar.exe

Image1.png

4. Double-click on the mbar.exe file, you may receive a User Account Control prompt asking if you are sure you wish to allow the program to run. Please allow the program to run and MBAR will now start to install any necessary drivers that are required for the program to operate correctly. If a rootkit is interfering with the installation of the drivers you will see a message that states that the DDA driver was not installed and that you should reboot your computer to install it. You will see this image:

mbarwm.png

5. If you receive this message, please click on the Yes button and Malwarebytes Anti-Rootkit will now restart your computer. Once the computer is rebooted and you login, MBAR will automatically start and you will now be at the start screen. (If no Rootkit warning you will go from step 4 to 6.)

6. The following image opens, select Next.

Image2.png

7. The following image opens, select Update

Image3.png

8. When the update completes select Next.

Image4.png

9. In the following window ensure "Targets" are ticked. Then select "Scan"

Image5.png

10. If an infection is found select the "Cleanup Button" to remove threats, Reboot if prompted. Wait while the system shuts down and the cleanup process is performed.

MBAntiRKcleanA.png

11. Perform another scan with Malwarebytes Anti-Rootkit to verify that no threats remain. If they do, then click "Cleanup Button" once more and repeat the process.
12. If no threats were found you will see the following image, Select Exit:

Image6.png

13. Verify that your system is now running normally, making sure that the following items are functional:

  •      
  • Internet access
         
  • Windows Update
         
  • Windows Firewall

14.  If there are additional problems with your system, such as any of those listed above or other system issues, then run the 'fixdamage' tool included within Malwarebytes Anti-Rootkit folder.

15. Select "Y" from your Keyboard, tap Enter.

16. The fix will be applied, select any key to Exit.

17. Let me know how your system now responds. Copy and paste the two following logs from the mbar folder:

System - log
Mbar - log   Date and time of scan will also be shown

Thanks,

Kevin...

 

Link to post
Share on other sites

Due to the lack of feedback this topic is closed to prevent others from posting here. If you need this topic reopened, please send a Private Message to any one of the moderating team members. Please include a link to this thread with your request. This applies only to the originator of this thread.Other members who need assistance please start your own topic in a new thread. Thanks!

Link to post
Share on other sites
Guest
This topic is now closed to further replies.
  • Recently Browsing   0 members

    No registered users viewing this page.

Back to top
×
×
  • Create New...

Important Information

This site uses cookies - We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.