Jump to content

Malicious Website Blocked Continuous Pop Up


Recommended Posts

My laptop was infected yesterday after a file download.

I purchased and installed a copy of Malwarebytes. (I previously had McAfee).

I ran several scans, deleted the deleted the detected objects. My last couple of scans showed no detected objects.

A malicious website blocked pop up is continuing every few seconds. Each time w/ a different Port no.

WebsiteBlocked.png

 I browsed to the location and it does not exist.

I also searched your forum and found a similar issue. It was recommended that they  run Farbar Recovery Scan Tool.

I did so, but it did not detect anything. Attached is the Farbar txt file.

Also attached are a couple of the Malwarebytes log files.

What would you recommend to eliminate the malicious website?

 

Thanks!

 

FRST.txt

LogFile1.txt

LogFile2.txt

Link to post
Share on other sites

  • Root Admin

Hello @brbengal and :welcome:

 

Please restart the computer first and then run the following steps and post back the logs when ready.

STEP 01
Please download Junkware Removal Tool to your desktop.

  • Shutdown your antivirus to avoid any conflicts.
  • Right click over JRT.exe and select Run as administrator on Windows Vista or Windows 7, double-click on XP.
  • The tool will open and start scanning your system.
  • Please be patient as this can take a while to complete.
  • On completion, a log (JRT.txt) is saved to your desktop and will automatically open.
  • Post the contents of JRT.txt into your next reply message
  • When completed make sure to re-enable your antivirus

STEP 02
Let's clean out any adware now: (this will require a reboot so save all your work)

Please download AdwCleaner by Xplode and save to your Desktop.

  • Double click on AdwCleaner.exe to run the tool.
    Vista / Windows 7/8 users right-click and select Run As Administrator
  • Click on the Scan button.
  • AdwCleaner will begin...be patient as the scan may take some time to complete.
  • When it's done, you'll see: Pending: Please uncheck elements you don't want to be removed.
  • Now click on the Report button and a logfile (AdwCleaner[R0].txt) will open in Notepad for review.
  • Look at the log especially under Files/Folders for any program you want to save.
  • If there's a program you may want to save, just uncheck it from AdwCleaner.
  • If you're not sure, post the log for review. (all items found are adware/spyware/foistware)
  • If you're ready to clean it all up, click the Clean button.
  • After rebooting, a logfile report (AdwCleaner[S0].txt) will open automatically.
  • Copy and paste the contents of that logfile in your next reply.
  • A copy of that logfile will also be saved in the C:\AdwCleaner folder.
  • Items that are deleted are moved to the Quarantine Folder: C:\AdwCleaner\Quarantine
  • To restore an item that has been deleted:
  • Go to Tools > Quarantine Manager > check what you want to be restored > now click on Restore.

STEP 03
Download Sophos Free Virus Removal Tool and save it to your desktop.
 

  • Double click the icon and select Run
  • Click Next
  • Select I accept the terms in this license agreement, then click Next twice
  • Click Install
  • Click Finish to launch the program
  • Once the virus database has been updated click Start Scanning
  • If any threats are found click Details, then View Log file (bottom left-hand corner)
  • Copy and paste the results in your reply
  • Close the Notepad document, close the Threat Details screen, then click Start cleanup
  • Click Exit to close the program
  • If no threats were found, please confirm that result.

STEP 04
Please download the Farbar Recovery Scan Tool and save it to your desktop.

Note: You need to run the version compatible with your system. You can check here if you're not sure if your computer is 32-bit or 64-bit

  • Double-click to run it. When the tool opens, click Yes to disclaimer.
  • Press the Scan button.
  • It will make a log (FRST.txt) in the same directory the tool is run. Please attach it to your reply.
  • The first time the tool is run, it also makes another log (Addition.txt). If you've, run the tool before you need to place a check mark here.
  • Please attach the Additions.txt log to your reply as well.

 

Thanks

Link to post
Share on other sites

Thanks Advanced Setup.

Per your instructions I ran JRT & the JRT.txt is attached. Results of my ADWcleaner scans are also attached.

I then ran Sophos and it detected (1) Virus 'Troj/Patched-BM' in C:\Windows\SysWOW64\dnsapi.dll, but cleanup failed. I then ran Farbar.

I then again ran JRT, ADWcleaner and then , Sophos. Sophos detected the virus, but again failed to clean up. I then ran Farbar again. 

I ran through the entire sequence once again, and Sophos would never clean up the detected virus.

Attached are the latest logs from each.

My laptop is no longer getting a "Malicious Website Blocked" warning and all appears to be ok. The Sophos detected virus is concerning.

What do you think?

...........and thanks again for your efforts!!!!!!

JRT.txt

Addition.txt

AdwCleaner[C3].txt

SophosVirusRemovalTool.log

FRST.txt

Link to post
Share on other sites

  • Root Admin

 

Please download the attached fixlist.txt file and save it to the Desktop.
NOTE. It's important that both files, FRST or FRST64 and fixlist.txt are in the same location or the fix will not work.

NOTICE: This script was written specifically for this user, for use on this particular machine. Running this on another machine may cause damage to your operating system.

Run FRST or FRST64 and press the Fix button just once and wait.
If the tool needs a restart please make sure you let the system restart normally and let the tool complete its run after restart.
The tool will make a log on the Desktop (Fixlog.txt). Please attach or post it to your next reply.

Note: If the tool warned you about an outdated version please download and run the updated version.

fixlist.txt

Thanks

 

Link to post
Share on other sites

  • Root Admin

Great, looks good.

Please run a Threat Scan with MBAM. If you're unable to run or complete the scan as shown below, please see the following:
MBAM Clean Removal Process 2x
When reinstalling the program, please try the latest version.

Right click and choose "Run as administrator" to open Malwarebytes Anti-Malware and from the Dashboard please Check for Updates by clicking the Update Now... link
Open up Malwarebytes > Settings > Detection and Protection > Enable Scan for rootkit and Under Non Malware Protection set both PUP and PUM to Treat detections as malware.
Click on the SCAN button and run a Threat Scan with Malwarebytes Anti-Malware by clicking the Scan Now>> button.
Once completed please click on the History > Application Logs and find your scan log and open it and then click on the "copy to clipboard" button and post back the results on your next reply.

 

Then let me know how the computer is running and if there are any other signs of an infection.

 

Link to post
Share on other sites

  • Root Admin

At this time there are no more signs of an infection on your system.
However if you are still seeing any signs of an infection please let me know.

Let's go ahead and remove the tools and logs we've used during this process.

Most of the tools used are potentially dangerous to use unsupervised or if ran at the wrong time.
They are often updated daily so if you went to use them again in the future they would be outdated anyways.

The following procedures will implement some cleanup procedures to remove these tools.
 
bwebb7v.jpgDownload Delfix from here and save it to your desktop. (you may already have this)

  • Ensure Remove disinfection tools is checked.
  • Click the Run button.
  • Reboot


Any other programs or logs that are still remaining, you can manually delete. (right click.....Delete)
IE: RogueKiller.exe, RKreport.txt, RK_Quarantine folder, C:\FRST folder, FRST-OlderVersion folder, MBAR folder, etc....AdwCleaner > just run the program and click uninstall.


 
If there are any other left over Folders, Files, Logs then you can delete them on your own.
 
Please visit the following link to see how to delete old System Restore Points. Please delete all of them and create a new one at this time.
How to Delete System Protection Restore Points in Windows 7 and Windows 8

Remove all but the most recent Restore Point on Windows XP


As Java seems to get exploited on a regular basis I advise not using Java if possible but to at least disable java in your web browsers
How do I disable Java in my web browser? - Disable Java

A lot of reading here but if you take the time to read a bit of it you'll see why/how infections and general damage are so easily inflicted on the computer. There is also advice on how to prevent it and keep the system working well. Don't forget about good, solid backups of your data to an external drive that is not connected except when backing up your data. If you leave a backup drive connected and you do get infected it can easily damage, encrypt, delete, or corrupt your backups as well and then you'd lose all data.
Nothing is 100% bulletproof but with a little bit of education you can certainly swing things in your favor.


If you're not currently using Malwarebytes Premium then you may want to consider purchasing the product which can also help greatly reduce the risk of a future infection.

 

Link to post
Share on other sites

  • Root Admin

Glad we could help. :)If you need this topic reopened, please send a Private Message to any one of the moderating team members. Please include a link to this thread with your request. This applies only to the originator of this thread.Other members who need assistance please start your own topic in a new thread. Thanks!

Link to post
Share on other sites

Guest
This topic is now closed to further replies.
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
Back to top
×
×
  • Create New...

Important Information

This site uses cookies - We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.