Jump to content

Internet not working after running malwarebytes


Recommended Posts

Can you download, transfer the following to sick PC... Transfer and upload the produced logs...

Download Farbar Recovery Scan Tool and save it to your desktop.

Note: You need to run the version compatible with your system (32 bit or 64 bit). If you are not sure which version applies to your system download both of them and try to run them. Only one of them will run on your system, that will be the right version.

If your security alerts to FRST either, accept the alert or turn your security off to allow FRST to run. It is not malicious or infected in any way...
 
  • Double-click to run it. When the tool opens click Yes to disclaimer.(Windows 8/10 users will be prompted about Windows SmartScreen protection - click More information and Run.)
  • Make sure Addition.txt is checkmarked under "Optional scans"
  • Press Scan button to run the tool....
  • It will make a log (FRST.txt) in the same directory the tool is run. Please copy and paste it to your reply.
  • The tool will also make a log named (Addition.txt) Please attach that log to your reply.


Next,

Download Farbar Service Scanner from here: http://www.bleepingcomputer.com/download/farbar-service-scanner/dl/62/ and run it on the computer with the issue.

Make sure the following options are checked:
 
  • Internet Services
  • Windows Firewall
  • System Restore
  • Security Center/Action Center
  • Windows Update
  • Windows Defender
 
  • Press "Scan".
  • It will create a log (FSS.txt) in the same directory the tool is run.
  • Please copy and paste the log to your reply.


Let me see those logs in your reply...

Thank you,

Kevin...
Link to post
Share on other sites

Download attached fixlist.txt file (end of reply) and save it to the Desktop, or the folder you saved FRST into.
NOTE. It's important that both FRST and fixlist.txt are in the same location or the fix will not work.

Run FRST and press the Fix button just once and wait.
The tool will make a log on the Desktop (Fixlog.txt) or the folder it was ran from. Please post it to your reply.

Next,

Please open Malwarebytes Anti-Malware.
 
  • On the Settings tab > Detection and Protection sub tab, Detection Options, tick the box "Scan for rootkits".
  • Under Non-Malware Protection sub tab Change PUP and PUM entries to Treat detections as Malware
  • Click on the Scan tab, then click on Scan Now >> . If an update is available, click the Update Now button.
  • A Threat Scan will begin.
  • When the Scan is complete Apply Actions to any found entries.
  • Wait for the prompt to restart the computer to appear (if applicable), then click on Yes.
  • After the restart once you are back at your desktop, open MBAM once more.


To get the log from Malwarebytes do the following:
 
  • Click on the History tab > Application Logs.
  • Double click on the Scan log which shows the Date and time of the scan just performed.
  • Click Export > From export you have three options:
    Copy to Clipboard - if seleted right click to your reply and select "Paste" log will be pasted to your reply
    Text file (*.txt) - if selected you will have to name the file and save to a place of choice, recommend "Desktop" then attach to reply
    XML file (*.xml) - if selected you will have to name the file and save to a place of choice, recommend "Desktop" then attach to reply
     
  • Please use "Copy to Clipboard, then Right click to your reply > select "Paste" that will copy the log to your reply…


Next,

Download AdwCleaner by Xplode onto your Desktop.
 
  • Double click on Adwcleaner.exe to run the tool.
  • Click on the Scan in the Actions box
  • Please wait fot the scan to finish..
  • When "Waiting for action.Please uncheck elements you want to keep" shows in top line..
  • Click on the Cleaning box.
  • Next click OK on the "Closing Programs" pop up box.
  • Click OK on the Information box & again OK to allow the necessary reboot
  • After restart the AdwCleaner(C*)-Notepad log will appear, please copy/paste it in your next reply. Where * is the number relative to list of scans completed...


Next,

Please download Junkware Removal Tool to your desktop.
 
  • Shut down your protection software now to avoid potential conflicts. (re-enable when done)
  • Run the tool by double-clicking it. If you are using Windows Vista, 7, or 8; instead of double-clicking, right-mouse click JRT.exe and select "Run as Administrator".
  • The tool will open and start scanning your system.
  • Please be patient as this can take a while to complete depending on your system's specifications.
  • On completion, a log (JRT.txt) is saved to your desktop and will automatically open.
  • Post the contents of JRT.txt into your next message.


Next,

Download Sophos Free Virus Removal Tool and save it to your desktop.
 
  • Double click the icon and select Run
  • Click Next
  • Select I accept the terms in this license agreement, then click Next twice
  • Click Install
  • Click Finish to launch the program
  • Once the virus database has been updated click Start Scanning
  • If any threats are found click Details, then View log file... (bottom left hand corner)
  • Copy and paste the results in your reply
  • Close the Notepad document, close the Threat Details screen, then click Start cleanup
  • Click Exit to close the program
  • If no threats were found please confirm that result....


Let me see those logs, also give an update on any remaining issues or concerns...

Thank you,

Kevin

Fixlist.txt

Link to post
Share on other sites

This is the scan log for malware bytes:

Malwarebytes Anti-Malware
www.malwarebytes.org

Scan Date: 28-07-2016
Scan Time: 21:30
Logfile: malwarebytesscanlog.txt
Administrator: Yes

Version: 2.2.1.1043
Malware Database: v2016.02.16.06
Rootkit Database: v2016.02.08.01
License: Trial
Malware Protection: Enabled
Malicious Website Protection: Disabled
Self-protection: Enabled

OS: Windows 10
CPU: x64
File System: NTFS
User: Dell

Scan Type: Threat Scan
Result: Completed
Objects Scanned: 336578
Time Elapsed: 17 min, 20 sec

Memory: Enabled
Startup: Enabled
Filesystem: Enabled
Archives: Enabled
Rootkits: Disabled
Heuristics: Enabled
PUP: Enabled
PUM: Enabled

Processes: 0
(No malicious items detected)

Modules: 0
(No malicious items detected)

Registry Keys: 4
PUP.Optional.VBates, HKLM\SOFTWARE\CLASSES\APPID\{425F4ABF-B8E4-402D-9E49-06E494EB8DBF}, Quarantined, [066091d01b7ed363160d4e2a0cf653ad], 
PUP.Optional.VBates, HKLM\SOFTWARE\WOW6432NODE\CLASSES\APPID\{425F4ABF-B8E4-402D-9E49-06E494EB8DBF}, Quarantined, [066091d01b7ed363160d4e2a0cf653ad], 
PUP.Optional.VBates, HKLM\SOFTWARE\CLASSES\WOW6432NODE\APPID\{425F4ABF-B8E4-402D-9E49-06E494EB8DBF}, Quarantined, [066091d01b7ed363160d4e2a0cf653ad], 
PUP.Optional.PriceFountain, HKLM\SOFTWARE\MICROSOFT\WINDOWS NT\CURRENTVERSION\SCHEDULE\TASKCACHE\TREE\DellShowmanUnauthenticatedV2, Quarantined, [95d10a57f3a6e452f1d9e27059ab22de], 

Registry Values: 0
(No malicious items detected)

Registry Data: 0
(No malicious items detected)

Folders: 0
(No malicious items detected)

Files: 1
PUP.Optional.HijackHosts.Gen, C:\Windows\System32\roen\ooo\lolk.dat, Quarantined, [b0b6362b8a0f2c0ad9eb9b742ed733cd], 

Physical Sectors: 0
(No malicious items detected)


(end)

Link to post
Share on other sites

  • Root Admin

Due to the lack of feedback this topic is closed to prevent others from posting here. If you need this topic reopened, please send a Private Message to any one of the moderating team members. Please include a link to this thread with your request. This applies only to the originator of this thread.Other members who need assistance please start your own topic in a new thread. Thanks!

Link to post
Share on other sites

Guest
This topic is now closed to further replies.
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
Back to top
×
×
  • Create New...

Important Information

This site uses cookies - We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.