Jump to content

Recommended Posts

Hi , I have weird errors on my Pc lately. Many programs give the program has stopped working message so i wanted to check for malware. When i wanted to run the already installed version of malwarebytes it gave me error messages and i also couldnt unistall it . I used mbam cleaner took to remove it. Now when i want to run the installer it gives me a runtime error right after starting the installation process. It says Runtime Error (at 92:100) ; Could not call proc.

I already ran Adwcleaner without succes.

Here are the both logs from Fabar Recovery scan tool , if it helps.

FRST.txt

Addition.txt

Link to post
Share on other sites

  • Root Admin

Hello @s0ul and :welcome:

 

I don't think that the computer is infected. I think you  mainly probably have some conflicting software and or damage from previous infections or software installs.

The logs show services not starting or crashing. Are you sure you disabled your Panda antivirus when you went to install MBAM ? Have you tried restarting the computer and then temporarily disabling the antivirus and see if the install works?

We can certainly run some scans and see if we detect anything though if you like but I'd try a computer restart and temp disable of AV first.

Please let me know how you'd like to proceed.

Thanks

Ron

 

Link to post
Share on other sites

Hi ,

i already tried to install it with Panda turned off.

I also tried in windows safe mode and it didnt work too.

I have no idea where the problem could be since i havent changed anything big on my pc in the recent time.

So far 2 other programs arent working as well. One is Remote Mouse Desktop app and the other one is Ds3_tool.

I would appreciate any help and thank you in advance.

Link to post
Share on other sites

  • Root Admin

Okay, let's go ahead then and scan it for any possible infections.

STEP 01
RKill is a program that was developed at BleepingComputer.com that attempts to terminate known malware processes
so that your normal security software can then run and clean your computer of infections.
When RKill runs it will kill malware processes and then removes incorrect executable associations and fixes policies
that stop us from using certain tools. When finished it will display a log file that shows the processes that were
terminated while the program was running.

As RKill only terminates a program's running process, and does not delete any files, after running it you should not reboot
your computer as any malware processes that are configured to start automatically will just be started again.
Instead, after running RKill you should immediately scan your computer using the requested scans I've included.

Please download Rkill by Grinler from one of the links below and save it to your desktop.

Link 1 | Link 2

  • On Windows XP double-click on the Rkill desktop icon to run the tool.
  • On Windows Vista/Windows 7 or 8, right-click on the Rkill desktop icon and select Run As Administrator
  • A black DOS box will briefly flash and then disappear. This is normal and indicates the tool ran successfully.
  • If not, delete the file, then download and use the one provided in Link 2.
  • If it does not work, repeat the process and attempt to use one of the remaining links until the tool runs.
  • If the tool does not run from any of the links provided, please let me know.
  • Do not reboot the computer, you will need to run the application again.



STEP 02
Backup the Registry:
Modifying the Registry can create unforeseen problems, so it always wise to create a backup before doing so.

  • Please download ERUNT from one of the following links: Link1 | Link2 | Link3
  • ERUNT (Emergency Recovery Utility NT) is a free program that allows you to keep a complete backup of your registry and restore it when needed.
  • Double click on erunt-setup.exe to Install ERUNT by following the prompts.
  • NOTE: Do not choose to allow ERUNT to add an Entry to the Startup folder. Click NO.
  • Start ERUNT either by double clicking on the desktop icon or choosing to start the program at the end of the setup process.
  • Choose a location for the backup.
    • Note: the default location is C:\Windows\ERDNT which is acceptable.
  • Make sure that at least the first two check boxes are selected.
  • Click on OK
  • Then click on YES to create the folder.
  • Note: if it is necessary to restore the registry, open the backup folder and start ERDNT.exe

 

 

We'll skip STEP 3 since it is an MBAM scan and its not installing right now.

 

Please go ahead and run through the following steps and post back the logs when ready.

STEP 04
Please download Junkware Removal Tool to your desktop.

  • Shutdown your antivirus to avoid any conflicts.
  • Right click over JRT.exe and select Run as administrator on Windows Vista or Windows 7, double-click on XP.
  • The tool will open and start scanning your system.
  • Please be patient as this can take a while to complete.
  • On completion, a log (JRT.txt) is saved to your desktop and will automatically open.
  • Post the contents of JRT.txt into your next reply message
  • When completed make sure to re-enable your antivirus



STEP 05
Lets clean out any adware now: (this will require a reboot so save all your work)

Please download AdwCleaner by Xplode and save to your Desktop.

  • Double click on AdwCleaner.exe to run the tool.
    Vista / Windows 7/8 users right-click and select Run As Administrator
  • Click on the Scan button.
  • AdwCleaner will begin...be patient as the scan may take some time to complete.
  • When it's done you'll see: Pending: Please uncheck elements you don't want removed.
  • Now click on the Report button...a logfile (AdwCleaner[R0].txt) will open in Notepad for review.
  • Look over the log especially under Files/Folders for any program you want to save.
  • If there's a program you may want to save, just uncheck it from AdwCleaner.
  • If you're not sure, post the log for review. (all items found are adware/spyware/foistware)
  • If you're ready to clean it all up.....click the Clean button.
  • After rebooting, a logfile report (AdwCleaner[S0].txt) will open automatically.
  • Copy and paste the contents of that logfile in your next reply.
  • A copy of that logfile will also be saved in the C:\AdwCleaner folder.
  • Items that are deleted are moved to the Quarantine Folder: C:\AdwCleaner\Quarantine
  • To restore an item that has been deleted:
  • Go to Tools > Quarantine Manager > check what you want restored > now click on Restore.


STEP 06
button_eos.gif

Please go here to run the online antivirus scannner from ESET.

  • Turn off the real time scanner of any existing antivirus program while performing the online scan
  • Tick the box next to YES, I accept the Terms of Use.
  • Click Start
  • When asked, allow the activex control to install
  • Click Start
  • Make sure that the option Remove found threats is unticked
  • Click on Advanced Settings and ensure these options are ticked:
    • Scan for potentially unwanted applications
    • Scan for potentially unsafe applications
    • Enable Anti-Stealth Technology
  • Click Scan
  • Wait for the scan to finish
  • If any threats were found, click the 'List of found threats' , then click Export to text file....
  • Save it to your desktop, then please copy and paste that log as a reply to this topic.



STEP 07
Please download the Farbar Recovery Scan Tool and save it to your desktop.

Note: You need to run the version compatibale with your system. You can check here if you're not sure if your computer is 32-bit or 64-bit

  • Double-click to run it. When the tool opens click Yes to disclaimer.
  • Press the Scan button.
  • It will make a log (FRST.txt) in the same directory the tool is run. Please attach it to your reply.
  • The first time the tool is run, it also makes another log (Addition.txt). Please attach it to your reply as well.

 

 

Link to post
Share on other sites

  • Root Admin

Due to the lack of feedback this topic is closed to prevent others from posting here. If you need this topic reopened, please send a Private Message to any one of the moderating team members. Please include a link to this thread with your request. This applies only to the originator of this thread.Other members who need assistance please start your own topic in a new thread. Thanks!

Link to post
Share on other sites

Guest
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
Back to top
×
×
  • Create New...

Important Information

This site uses cookies - We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.