Jump to content

Corrupt, locked, missing system files, cabs, drive partition


Recommended Posts

Windows 7 SP1 64 kaptop.    Tweaking.com logs show locked cabinet files, missing files, services missing or turned off, etc.  I also notice that I have a partition that can't be accessed.  I am also afraid there is a backdoor and documents are tampered with.  SFC/scan now indicates numerous corruptions.    When I tried to fix a PMEM file issue I clicked a link on an ad that caused things to get worse. So I am afraid to turn off the machine.   I have run an sfc and a tweaking repair routine, but am afraid to reboot.  The tweaking routine includes a scan/fix command. 

HELP !

HKLM_Set_Owner_Error_Log.txt

HKLM_Set_Permissions_Error_Log.txt

HKU_Set_Owner_Error_Log.txt

HKU_Set_Permissions_Error_Log.txt

Remove_Temp_Files.txt

Repair_Icons.txt

Repair_MSI_Windows_Installer.txt

Repair_Network.txt

Repair_Performance_Counters.txt

Repair_Print_Spooler.txt

Repair_Volume_Shadow_Copy_Service.txt

Repair_Windows_Firewall.txt

Repair_Windows_Updates.txt

Repair_WMI.txt

Services_Set_Permissions_Error_Log.txt

Unhidden_Files.txt

_Windows_Repair_Log.txt

Link to post
Share on other sites

Hello mikethemouth and welcome to Malwarebytes,

My screen name is kevinf80, i`m here to help clean up your system, continue as follows please:

Download RKill from here: http://www.bleepingcomputer.com/download/rkill/

There are three buttons to choose from with different names on, select the first one and save it to your desktop.
 
  • Double-click on the Rkill desktop icon to run the tool.
  • If using Vista or Windows 7/8/10, right-click on it and Run As Administrator.
  • A black DOS box will briefly flash and then disappear. This is normal and indicates the tool ran successfully.
  • A log pops up at the end of the run. This log file is located at C:\rkill.log. Please post this in your next reply.
  • If you do not see the black box flash on the screen delete the icon from the desktop and go back to the link for the download, select the next button and try to run the tool again, continue to repeat this process using the remaining buttons until the tool runs. You will find further links if you scroll down the page with other names, try them one at a time.
  • If the tool does not run from any of the links provided, please let me know.


Next,

Please open Malwarebytes Anti-Malware.
 
  • On the Settings tab > Detection and Protection sub tab, Detection Options, tick the box "Scan for rootkits".
  • Under Non-Malware Protection sub tab Change PUP and PUM entries to Treat detections as Malware
  • Click on the Scan tab, then click on Scan Now >> . If an update is available, click the Update Now button.
  • A Threat Scan will begin.
  • When the scan is complete Apply Actions to any found entries.
  • Wait for the prompt to restart the computer to appear (if applicable), then click on Yes.
  • After the restart once you are back at your desktop, open MBAM once more.


To get the log from Malwarebytes do the following:
 
  • Click on the History tab > Application Logs.
  • Double click on the scan log which shows the Date and time of the scan just performed.
  • Click Export > From export you have three options:
    Copy to Clipboard - if seleted right click to your reply and select "Paste" log will be pasted to your reply
    Text file (*.txt) - if selected you will have to name the file and save to a place of choice, recommend "Desktop" then attach to reply
    XML file (*.xml) - if selected you will have to name the file and save to a place of choice, recommend "Desktop" then attach to reply
     
  • Please use "Copy to Clipboard, then Right click to your reply > select "Paste" that will copy the log to your reply…



If Malwarebytes is not installed follow these instructions first:

Download Malwarebytes Anti-Malware to your desktop.
  • Double-click mbam-setup and follow the prompts to install the program.
  • At the end, be sure a checkmark is placed next to the following:
  • Launch Malwarebytes Anti-Malware
  • A 14 day trial of the Premium features is pre-selected. You may deselect this if you wish, and it will not diminish the scanning and removal capabilities of the program.
  • Click Finish. Follow the instructions above....


Next,

Download Farbar Recovery Scan Tool and save it to your desktop.

Note: You need to run the version compatible with your system (32 bit or 64 bit). If you are not sure which version applies to your system download both of them and try to run them. Only one of them will run on your system, that will be the right version.

If your security alerts to FRST either, accept the alert or turn your security off to allow FRST to run. It is not malicious or infected in any way...
 
  • Double-click to run it. When the tool opens click Yes to disclaimer.(Windows 8/10 users will be prompted about Windows SmartScreen protection - click More information and Run.)
  • Make sure Addition.txt is checkmarked under "Optional scans"
  • Press Scan button to run the tool....
  • It will make a log (FRST.txt) in the same directory the tool is run. Please copy and paste it to your reply.
  • The tool will also make a log named (Addition.txt) Please attach those logs to your reply.


Next,

Please download RogueKiller and save it to your desktop from the following link: http://www.bleepingcomputer.com/download/roguekiller/
 
  • Quit all running programs.
  • For Windows XP, double-click to start.
  • For Vista,Windows 7/8/8.1/10, Right-click on the program and select Run as Administrator to start and when prompted allow it to run.
  • Read and accept the EULA (End User Licene Agreement)
  • Click Scan to scan the system.
  • When the scan completes select "Report",in the next window select "Export txt" the log will open as a text file post that log... Also save to your Desktop for reference. log will open.
  • Close the program > Don't Fix anything!


Let me see those logs in your reply...

Thank you,

Kevin...
Link to post
Share on other sites

  • Root Admin

Due to the lack of feedback this topic is closed to prevent others from posting here. If you need this topic reopened, please send a Private Message to any one of the moderating team members. Please include a link to this thread with your request. This applies only to the originator of this thread.Other members who need assistance please start your own topic in a new thread. Thanks!

Link to post
Share on other sites

Guest
This topic is now closed to further replies.
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
Back to top
×
×
  • Create New...

Important Information

This site uses cookies - We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.