Jump to content

Gangnamgame.org help


Recommended Posts

I own a year of Malwarebytes and tried to run a scan to get rid of a the registry file that enters the command to open that website but it didn't catch anything. I also opened regedit and didn't find anything to remove in windows/run. any help would be appreciated. Read another older topic from these forums about another user changing the .exe file name. Not sure how that works. Please assist. Thanks.

Link to post
Share on other sites

Hello and welcome to Malwarebytes,

Please be aware the following P2P/Piracy Warning is a standard opening reply made here at Malwarebytes, we make no accusations but do make you aware of Forum Protocol....

If you're using Peer 2 Peer software such as uTorrent, BitTorrent or similar you must either fully uninstall them or completely disable them from running while being assisted here.Failure to remove or disable such software will result in your topic being closed and no further assistance being provided.If you have illegal/cracked software, cracks, keygens etc. on the system, please remove or uninstall them now and read the policy on Piracy.


Anyone other than the original starter of this thread please DO NOT follow the instructions and advice posted as replies here, my help and advice is NOT related to your system and will probably cause more harm than good...

Please open Malwarebytes Anti-Malware.

  • On the Settings tab > Detection and Protection sub tab, Detection Options, tick the box "Scan for rootkits". <---- Very Important
  • Under Non-Malware Protection sub tab Change PUP and PUM entries to Treat detections as Malware
  • Click on the Scan tab, then click on Scan Now >> . If an update is available, click the Update Now button.
  • A Threat Scan will begin.
  • With some infections, you may or may not see this message box.

            'Could not load DDA driver'
  • Click 'Yes' to this message, to allow the driver to load after a restart.
  • Allow the computer to restart. Continue with the rest of these instructions.
  • When the scan is complete, click Apply Actions.
  • Wait for the prompt to restart the computer to appear, then click on Yes.
  • After the restart once you are back at your desktop, open MBAM once more.



To get the log from Malwarebytes do the following:

  • Click on the History tab > Application Logs.
  • Double click on the scan log which shows the Date and time of the scan just performed.
  • Click Export > From export you have three options:

      Copy to Clipboard - if seleted right click to your reply and select "Paste" log will be pasted to your reply
      Text file (*.txt)        - if selected you will have to name the file and save to a place of choice, recommend "Desktop" then attach to reply
      XML file (*.xml)      - if selected you will have to name the file and save to a place of choice, recommend "Desktop" then attach to reply
  • Please use "Copy to Clipboard, then Right click to your reply > select "Paste" that will copy the log to your reply…




If Malwarebytes is not installed follow these instructions first:

Download Malwarebytes Anti-Malware to your desktop.

  • Double-click mbam-setup and follow the prompts to install the program.
  • At the end, be sure a checkmark is placed next to the following:
  • Launch Malwarebytes Anti-Malware
  • A 14 day trial of the Premium features is pre-selected. You may deselect this if you wish, and it will not diminish the scanning and removal capabilities of the program.
  • Click Finish. Follow the instructions above....


Next,

Download AdwCleaner by Xplode onto your Desktop.

  • Double click on Adwcleaner.exe to run the tool.
  • Click on the Scan in the Actions box
  • Please wait fot the scan to finish..
  • When "Waiting for action.Please uncheck elements you want to keep" shows in top line..
  • Click on the Cleaning box.
  • Next click OK on the "Closing Programs" pop up box.
  • Click OK on the Information box & again OK to allow the necessary reboot
  • After restart the AdwCleaner(C*)-Notepad log will appear, please copy/paste it in your next reply. Where * is the number relative to list of scans completed...



Next,

Download Farbar Recovery Scan Tool and save it to your desktop.

Note: You need to run the version compatible with your system (32 bit or 64 bit). If you are not sure which version applies to your system download both of them and try to run them. Only one of them will run on your system, that will be the right version.


  • Double-click to run it. When the tool opens click Yes to disclaimer.
    (Windows 8/10 users will be prompted about Windows SmartScreen protection - click More information and Run.)
  • Make sure Addition.txt is checkmarked under "Optional scans"
  • Press Scan button to run the tool....
  • It will make a log (FRST.txt) in the same directory the tool is run. Please copy and paste it to your reply.
  • The tool will also make a log named (Addition.txt) Please attach those logs to your reply.



Let me see those logs in your next reply...

Thank you,

Kevin...
 

Link to post
Share on other sites

Download attached fixlist.txt file (end of reply) and save it to the Desktop, or the folder you saved FRST into.
NOTE. It's important that both FRST and fixlist.txt are in the same location or the fix will not work.

Run FRST and press the Fix button just once and wait.
The tool will make a log on the Desktop (Fixlog.txt) or the folder it was ran from. Please post it to your reply.

 

Next,

 

thisisujrt.gif Please download Junkware Removal Tool to your desktop.

  • Shut down your protection software now to avoid potential conflicts. (re-enable when done)
  • Run the tool by double-clicking it. If you are using Windows Vista, 7, or 8; instead of double-clicking, right-mouse click JRT.exe and select "Run as Administrator".
  • The tool will open and start scanning your system.
  • Please be patient as this can take a while to complete depending on your system's specifications.
  • On completion, a log (JRT.txt) is saved to your desktop and will automatically open.
  • Post the contents of JRT.txt into your next message.

 
Next,
 
dr_web_cureit_zpse80d87bf.jpg
Download Dr Web Cureit from here http://www.freedrweb.com/cureit save to your desktop. (Scroll to bottom of page)

  • The file will be randomly named
  • Reboot to safe mode <<<<<------------ http://www.computerhope.com/issues/chsafe.htm
  • Run Dr Web
  • Tick the I agree box and select continue
  • Click select objects for scanning


    drwebselect.JPG

  • Tick all boxes as shown
  • Click the wrench and select automatically apply actions to threats


    drwebfolders.JPG

  • Press start scan
  • The scan will now commence


    drwebscan.JPG

  • Once the scan has finished click open report <<<--- Do not miss this step


    drwebscancomplete.JPG

  • A notepad will open
  • Select File > Save as..
  • Save it to your desktop



This log will be excessive,  Please attach it to your next reply…

Next,

 

Select the Windows key and X key together, from the menu select "Command prompt (Admin)"
 

Copy the following command at the prompt:
 

Licensingdiag.exe -report %userprofile%\desktop\report.txt -log %userprofile%\desktop\repfiles.cab
 

put cursor at the command prompt then Right click and select paste, hit enter. Two files will be saved to your Desktop.
 

Attach the "report.txt" file to your reply. - you can ignore the repfiles.cab file, it's only backup data

 

Let me see those logs, also tell me if there are any remaining issues or concerns....

 

Thank you,

 

Kevin

 

Fixlist.txt

Link to post
Share on other sites

Ok, if we are done run the following to clean up:

 

Download "Delfix by Xplode" and save it to your desktop.

Or use the following if first link is down:

"Delfix link mirror"

If your security program alerts to Delfix either, accept the alert or turn your security off.

Double Click to start the program. If you are using Vista or higher, please right-click and choose run as administrator

Make Sure the following items are checked:



  •    
  • Remove disinfection tools
       
  • Purge System Restore <--- this will remove all previous and possibly exploited restore points, a new point relative to system status at present will be created.
       
  • Reset system settings



Now click on "Run" and wait patiently until the tool has completed.

The tool will create a log when it has completed. We don't need you to post this.

Any remnant files/logs from tools we have used can be deleted…
 

Next,

 

Read the following links to fully understand PC Security and Best Practices, you may find them useful....

Answers to Common Security Questions and best Practices

Do I need a Registry Cleaner?

Take care and surf safe

Kevin...  busy.gif
 

Link to post
Share on other sites

Glad we could help. :)

If you need this topic reopened, please send a Private Message to any one of the moderating team members. Please include a link to this thread with your request. This applies only to the originator of this thread.

Other members who need assistance please start your own topic in a new thread. Thanks!

Link to post
Share on other sites

Guest
This topic is now closed to further replies.
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
Back to top
×
×
  • Create New...

Important Information

This site uses cookies - We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.