Jump to content

tradeadexchange.com malware

gauravsarm
 Share

Recommended Posts

kevinf80

kevinf80

Posted
Posted

Hello and welcome to Malwarebytes,

Please be aware the following P2P/Piracy Warning is a standard opening reply made here at Malwarebytes, we make no accusations but do make you aware of Forum Protocol....

If you're using Peer 2 Peer software such as uTorrent, BitTorrent or similar you must either fully uninstall them or completely disable them from running while being assisted here.Failure to remove or disable such software will result in your topic being closed and no further assistance being provided.If you have illegal/cracked software, cracks, keygens etc. on the system, please remove or uninstall them now and read the policy on Piracy.

 

Next,

 

Please open Malwarebytes Anti-Malware.

  • On the Settings tab > Detection and Protection sub tab, Detection Options, tick the box "Scan for rootkits".
  • Under Non-Malware Protection sub tab Change PUP and PUM entries to Treat detections as Malware
  • Click on the Scan tab, then click on Scan Now >> . If an update is available, click the Update Now button.
  • A Threat Scan will begin.
  • With some infections, you may or may not see this message box.

            'Could not load DDA driver'
  • Click 'Yes' to this message, to allow the driver to load after a restart.
  • Allow the computer to restart. Continue with the rest of these instructions.
  • When the scan is complete, click Apply Actions.
  • Wait for the prompt to restart the computer to appear, then click on Yes.
  • After the restart once you are back at your desktop, open MBAM once more.



To get the log from Malwarebytes do the following:

  • Click on the History tab > Application Logs.
  • Double click on the scan log which shows the Date and time of the scan just performed.
  • Click Export > From export you have three options:

      Copy to Clipboard - if seleted right click to your reply and select "Paste" log will be pasted to your reply
      Text file (*.txt)        - if selected you will have to name the file and save to a place of choice, recommend "Desktop" then attach to reply
      XML file (*.xml)      - if selected you will have to name the file and save to a place of choice, recommend "Desktop" then attach to reply
  • Please use "Copy to Clipboard, then Right click to your reply > select "Paste" that will copy the log to your reply…




If Malwarebytes is not installed follow these instructions first:

Download Malwarebytes Anti-Malware to your desktop.

  • Double-click mbam-setup and follow the prompts to install the program.
  • At the end, be sure a checkmark is placed next to the following:
  • Launch Malwarebytes Anti-Malware
  • A 14 day trial of the Premium features is pre-selected. You may deselect this if you wish, and it will not diminish the scanning and removal capabilities of the program.
  • Click Finish. Follow the instructions above....

 
Next,
 
Download Farbar Recovery Scan Tool and save it to your desktop.

Note: You need to run the version compatible with your system (32 bit or 64 bit). If you are not sure which version applies to your system download both of them and try to run them. Only one of them will run on your system, that will be the right version.

If your security alerts to FRST either, accept the alert or turn your security off to allow FRST to run. It is not malicious or infected in any way...

  • Double-click to run it. When the tool opens click Yes to disclaimer.
    (Windows 8/10 users will be prompted about Windows SmartScreen protection - click More information and Run.)
  • Make sure Addition.txt is checkmarked under "Optional scans"
  • Press Scan button to run the tool....
  • It will make a log (FRST.txt) in the same directory the tool is run. Please copy and paste it to your reply.
  • The tool will also make a log named (Addition.txt)  Please attach those logs to your reply.


 

Next,

 

Please download RogueKiller and save it to your desktop from the following link: http://www.bleepingcomputer.com/download/roguekiller/

  • Quit all running programs.
  • For Windows XP, double-click to start.
  • For Vista,Windows 7/8/8.1/10, Right-click on the program and select Run as Administrator to start and when prompted allow it to run.
  • Read and accept the EULA (End User Licene Agreement)
  • Click Scan to scan the system.
  • When the scan completes select "Report",in the next window select "Export txt" the log will open as a text file post that log... Also save to your Desktop for reference. log will open.
  • Close the program > Don't Fix anything!

 

Let me see those logs in your reply....

 

Thank you,

 

Kevin....

Link to post
Share on other sites
gauravsarm

gauravsarm

Posted
  • Author
Posted

Thank you for your reply 

Please find logs for malwarebyte as follow

 

Malwarebytes Anti-Malware
www.malwarebytes.org
 
Scan Date: 03-Jan-16
Scan Time: 8:05 PM
Logfile: malwarebytes logs.txt
Administrator: Yes
 
Version: 2.2.0.1024
Malware Database: v2016.01.03.03
Rootkit Database: v2015.12.26.01
License: Trial
Malware Protection: Enabled
Malicious Website Protection: Enabled
Self-protection: Disabled
 
OS: Windows 7 Service Pack 1
CPU: x64
File System: NTFS
User: gaurav
 
Scan Type: Threat Scan
Result: Completed
Objects Scanned: 334992
Time Elapsed: 18 min, 14 sec
 
Memory: Enabled
Startup: Enabled
Filesystem: Enabled
Archives: Enabled
Rootkits: Enabled
Heuristics: Enabled
PUP: Enabled
PUM: Enabled
 
Processes: 0
(No malicious items detected)
 
Modules: 0
(No malicious items detected)
 
Registry Keys: 1
PUP.Optional.UpdateCheckerApp, HKLM\SYSTEM\CURRENTCONTROLSET\SERVICES\EVENTLOG\APPLICATION\UpdateCheckerApp, Quarantined, [142b0332752439fd2fc4577a08fb6d93], 
 
Registry Values: 0
(No malicious items detected)
 
Registry Data: 0
(No malicious items detected)
 
Folders: 0
(No malicious items detected)
 
Files: 0
(No malicious items detected)
 
Physical Sectors: 0
(No malicious items detected)
 
 
(end)
Link to post
Share on other sites
kevinf80

kevinf80

Posted
Posted

Thanks for those logs, continue as follows:

 

Download attached fixlist.txt file (end of reply) and save it to the Desktop, or the folder you saved FRST into.
NOTE. It's important that both FRST and fixlist.txt are in the same location or the fix will not work.

Run FRST and press the Fix button just once and wait.
The tool will make a log on the Desktop (Fixlog.txt) or the folder it was ran from. Please post it to your reply.
 

Next,

 

Download AdwCleaner by Xplode onto your Desktop.

  • Double click on Adwcleaner.exe to run the tool.
  • Click on the Scan in the Actions box
  • Please wait fot the scan to finish..
  • When "Waiting for action.Please uncheck elements you want to keep" shows in top line..
  • Click on the Cleaning box.
  • Next click OK on the "Closing Programs" pop up box.
  • Click OK on the Information box & again OK to allow the necessary reboot
  • After restart the AdwCleaner(C*)-Notepad log will appear, please copy/paste it in your next reply. Where * is the number relative to list of scans completed...

 
Next,
 
thisisujrt.gif Please download Junkware Removal Tool to your desktop.

  • Shut down your protection software now to avoid potential conflicts. (re-enable when done)
  • Run the tool by double-clicking it. If you are using Windows Vista, 7, or 8; instead of double-clicking, right-mouse click JRT.exe and select "Run as Administrator".
  • The tool will open and start scanning your system.
  • Please be patient as this can take a while to complete depending on your system's specifications.
  • On completion, a log (JRT.txt) is saved to your desktop and will automatically open.
  • Post the contents of JRT.txt into your next message.

 

Next,

 

Download and Save McAfee Stinger to your Desktop from here:
 

http://downloadcenter.mcafee.com/products/mcafee-avert/Stinger/stinger32.exe
 

Read the Terms and Conditions, the download tab is at the bottom of the page.
 

Close all browsers before starting. Disable your antivirus program and anti-malware, if any.
 

To Temporarily Disable Your Anti-virus, Firewall And Anti-malware Programs read here:
 

http://www.bleepingcomputer.com/forums/topic114351.html
 

On Windows 7, 8, 10 & Vista systems, Right Click on Stinger stinger.jpg and select Run as Administrator.

On XP, double-click to start it.
 

Click on “I Accept” tab at McAfee end user licence agreement.
 

Stinger%20a.png
 

In the new Window select “Advanced” then “Settings”
 

Stinger%20b.png
 

The settings window will open, make sure the settings are exactly as shown in the following image, then select “Save” <<------Very Important
 

Stinger%20c.png
 

In the new window Click the “Customize my Scan” under the “Scan” button.
 

Stinger%20f.png
 

In the new Window select C:\ drive and any other listed Hard Drive, then select “Scan”
 

Stinger%20g.png
 

When the scan completes select the “View log” to do that, select “Notepad” if offered in list of choices.

If the log opens in your browser, copy and save to a file....

I will need a copy of that log.

 

Let me see those logs, also give an update on any remaining issues or concerns....

 

Thank you,

 

Kevin


 

 

 

Fixlist.txt

Link to post
Share on other sites
kevinf80

kevinf80

Posted
Posted

ok if the issue is still happening with Chrome lets go for a clean install:

 

If your Chrome Bookmarks are important do this first:

Go to this link: http://www.wikihow.com/Export-Bookmarks-from-Chrome follow the instructions and Export your Bookmarks from Chrome, save to your Desktop or similar. Note the instructions can also be used to Import the bookmarks.....

Continue for a clean install:

Remove all synced data from Chrome go here: http://www.howtogeek.com/103655/how-to-delete-your-google-chrome-browser-sync-data/ follow those instructions...

Uninstall Chrome: https://support.google.com/chrome/answer/95319?hl=en-GB follow those instructions, ensure the option to "Also delete your browsing data" is selected. <<--- Very important!!

Navigate to C:\Users\Your user name\Appdata\Local  from that folder delete the folder named Google (you will need to show hidden files/folders to see the folder Appdata)

How to show hidden files and folders for windows: http://www.howtogeek.com/howto/windows-vista/show-hidden-files-and-folders-in-windows-vista/

Install Google Chrome from here: https://www.google.com/intl/en_uk/chrome/browser/desktop/index.html

Install Adblock Plus to Chrome: https://chrome.google.com/webstore/detail/adblock-plus/cfhdojbkjhnklbpkdaibdccddilifddb

Let me know if that clears the issue..

 

Thank you,

 

Kevin...
 

Link to post
Share on other sites
kevinf80

kevinf80

Posted
Posted

Excellent, if no other issues or concerns run the following to clean up:

 

Download "Delfix by Xplode" and save it to your desktop.

Or use the following if first link is down:

"Delfix link mirror"

If your security program alerts to Delfix either, accept the alert or turn your security off.

Double Click to start the program. If you are using Vista or higher, please right-click and choose run as administrator

Make Sure the following items are checked:



  •    
  • Remove disinfection tools
       
  • Purge System Restore <--- this will remove all previous and possibly exploited restore points, a new point relative to system status at present will be created.
       
  • Reset system settings



Now click on "Run" and wait patiently until the tool has completed.

The tool will create a log when it has completed. We don't need you to post this.

Any remnant files/logs from tools we have used can be deleted…
 

Next,

 

Read the following links to fully understand PC Security and Best Practices, you may find them useful....

Answers to Common Security Questions and best Practices

Do I need a Registry Cleaner?

Take care and surf safe

Kevin...  busy.gif
 

Link to post
Share on other sites
  • Root Admin
AdvancedSetup

AdvancedSetup

Posted
  • Root Admin
Posted

Glad we could help. :)

If you need this topic reopened, please send a Private Message to any one of the moderating team members. Please include a link to this thread with your request. This applies only to the originator of this thread.

Other members who need assistance please start your own topic in a new thread. Thanks!

Link to post
Share on other sites
Guest
This topic is now closed to further replies.
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.
Back to top
×
×
  • Create New...

Important Information

This site uses cookies - We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.