Jump to content

Cannot access to anti-malware sites!


Recommended Posts

Hello,

 

This is my first post.

I was installing Respberry Pi on my Windows 10 machine from a file I got from this site: vitorrentz.tv

It downloaded a zip file and it contained an executable.

Once I executed, Window Defender notified a malware.

I hoped the Window defender did its job right, but I was not quite sure. Then, I tried to download an antivirus scanner to see if any infection has been made. 

However, my chrome browser is unable to access all the virus sites I tried. It either says "the site cannot be accessed ..." or just a singe character 'a' is displayed on the browser.

I can still access cnn, espn, ...

Is this a common malware?

How can I remove it?

 

Thanks

Link to post
Share on other sites

Hello and welcome to Malwarebytes,

Please be aware the following P2P/Piracy Warning is a standard opening reply made here at Malwarebytes, we make no accusations but do make you aware of Forum Protocol....

If you're using Peer 2 Peer software such as uTorrent, BitTorrent or similar you must either fully uninstall them or completely disable them from running while being assisted here.Failure to remove or disable such software will result in your topic being closed and no further assistance being provided.If you have illegal/cracked software, cracks, keygens etc. on the system, please remove or uninstall them now and read the policy on Piracy.

 

Please open Malwarebytes Anti-Malware.

  • On the Settings tab > Detection and Protection sub tab, Detection Options, tick the box "Scan for rootkits".
  • Under Non-Malware Protection sub tab Change PUP and PUM entries to Treat detections as Malware
  • Click on the Scan tab, then click on Scan Now >> . If an update is available, click the Update Now button.
  • A Threat Scan will begin.
  • With some infections, you may or may not see this message box.

            'Could not load DDA driver'
  • Click 'Yes' to this message, to allow the driver to load after a restart.
  • Allow the computer to restart. Continue with the rest of these instructions.
  • When the scan is complete, click Apply Actions.
  • Wait for the prompt to restart the computer to appear, then click on Yes.
  • After the restart once you are back at your desktop, open MBAM once more.



To get the log from Malwarebytes do the following:

  • Click on the History tab > Application Logs.
  • Double click on the scan log which shows the Date and time of the scan just performed.
  • Click Export > From export you have three options:

      Copy to Clipboard - if seleted right click to your reply and select "Paste" log will be pasted to your reply
      Text file (*.txt)        - if selected you will have to name the file and save to a place of choice, recommend "Desktop" then attach to reply
      XML file (*.xml)      - if selected you will have to name the file and save to a place of choice, recommend "Desktop" then attach to reply
  • Please use "Copy to Clipboard, then Right click to your reply > select "Paste" that will copy the log to your reply…




If Malwarebytes is not installed follow these instructions first:

Download Malwarebytes Anti-Malware to your desktop.

  • Double-click mbam-setup and follow the prompts to install the program.
  • At the end, be sure a checkmark is placed next to the following:
  • Launch Malwarebytes Anti-Malware
  • A 14 day trial of the Premium features is pre-selected. You may deselect this if you wish, and it will not diminish the scanning and removal capabilities of the program.
  • Click Finish. Follow the instructions above....

 
Next,
 
Download Farbar Recovery Scan Tool and save it to your desktop.

Note: You need to run the version compatible with your system (32 bit or 64 bit). If you are not sure which version applies to your system download both of them and try to run them. Only one of them will run on your system, that will be the right version.

If your security alerts to FRST either, accept the alert or turn your security off to allow FRST to run. It is not malicious or infected in any way...

  • Double-click to run it. When the tool opens click Yes to disclaimer.
    (Windows 8/10 users will be prompted about Windows SmartScreen protection - click More information and Run.)
  • Make sure Addition.txt is checkmarked under "Optional scans"
  • Press Scan button to run the tool....
  • It will make a log (FRST.txt) in the same directory the tool is run. Please copy and paste it to your reply.
  • The tool will also make a log named (Addition.txt)  Please attach those logs to your reply.


 

Post those logs in your reply..

 

Thank you,

 

Kevin

Link to post
Share on other sites

Thanks for your reply.

I downloaded a free version of malware bite (mbam-setup-2.2.0.1024.exe).

When I double clicked the exe file, a dialog box appeared and asked me to select the language.

Once I selected English, then nothing happened on the infected machine (win 10).

When I ran it on my win 7, it ran fine.

I guess the malware on my win 10 prevents the malware bite from  running?

Link to post
Share on other sites

Thanks for the logs, continue as follows:

 

Download attached fixlist.txt file (end of reply) and save it to the Desktop, or the folder you saved FRST into.
NOTE. It's important that both FRST and fixlist.txt are in the same location or the fix will not work.

Run FRST and press the Fix button just once and wait.
The tool will make a log on the Desktop (Fixlog.txt) or the folder it was ran from. Please post it to your reply.
 

Next,

 

Try Malwarebytes again.....

 

Please open Malwarebytes Anti-Malware.
 

  • On the Settings tab > Detection and Protection sub tab, Detection Options, tick the box "Scan for rootkits".
  • Under Non-Malware Protection sub tab Change PUP and PUM entries to Treat detections as Malware
  • Click on the Scan tab, then click on Scan Now >> . If an update is available, click the Update Now button.
  • A Threat Scan will begin.
  • When the scan is complete, click Apply Actions.
  • Wait for the prompt to restart the computer to appear (if applicable), then click on Yes.
  • After the restart once you are back at your desktop, open MBAM once more.


To get the log from Malwarebytes do the following:
 

  • Click on the History tab > Application Logs.
  • Double click on the scan log which shows the Date and time of the scan just performed.
  • Click Export > From export you have three options:

      Copy to Clipboard - if seleted right click to your reply and select "Paste" log will be pasted to your reply
      Text file (*.txt)        - if selected you will have to name the file and save to a place of choice, recommend "Desktop" then attach to reply
      XML file (*.xml)      - if selected you will have to name the file and save to a place of choice, recommend "Desktop" then attach to reply
  • Please use "Copy to Clipboard, then Right click to your reply > select "Paste" that will copy the log to your reply…

 

 

Post those logs in your reply...

 

Thank you,

 

Kevin

Fixlist.txt

Link to post
Share on other sites

  • 2 weeks later...
  • Root Admin

Due to the lack of feedback this topic is closed to prevent others from posting here. If you need this topic reopened, please send a Private Message to any one of the moderating team members. Please include a link to this thread with your request. This applies only to the originator of this thread.

Other members who need assistance please start your own topic in a new thread. Thanks!

Link to post
Share on other sites

Guest
This topic is now closed to further replies.
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
Back to top
×
×
  • Create New...

Important Information

This site uses cookies - We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.