Jump to content

Program broadcasts my IP which DDOSes my router


Recommended Posts

  • 1 month later...
  • Root Admin

Hello and :welcome:

Please read the following and post back the logs when ready and we'll see about getting you cleaned up.

General P2P/Piracy Warning:

If you're using Peer 2 Peer software such as uTorrent, BitTorrent or similar you must either fully uninstall them or completely disable them from running while being assisted here.

Failure to remove or disable such software will result in your topic being closed and no further assistance being provided.

If you have illegal/cracked software, cracks, keygens etc. on the system, please remove or uninstall them now and read the policy on Piracy.

Before we proceed further, please read all of the following instructions carefully.

If there is anything that you do not understand kindly ask before proceeding.

If needed please print out these instructions.

  • Please do not post logs using CODE, QUOTE, or FONT tags. Just paste them as direct text.
  • If the log is too large then you can use attachments by clicking on the More Reply Options button.
  • Please enable your system to show hidden files: How to see hidden files in Windows
  • Make sure you're subscribed to this topic:
    • Click on the Follow This Topic Button (at the top right of this page), make sure that the Receive notification box is checked and that it is set to Instantly
  • Removing malware can be unpredictable...It is unlikely but things can go very wrong! Please make sure you Backup all files that cannot be replaced if something were to happen. You can copy them to a CD/DVD, external drive or a pen drive
  • Please don't run any other scans, download, install or uninstall any programs unless requested by me while I'm working with you.
  • The removal of malware is not instantaneous, please be patient. Often we are also on a different Time Zone.
  • Perform everything in the correct order. Sometimes one step requires the previous one.
  • If you have any problems while following my instructions, Stop there and tell me the exact nature of the issue.
  • You can check here if you're not sure if your computer is 32-bit or 64-bit
  • Please disable your antivirus while running any requested scanners so that they do not interfere with the scanners.
  • When we are done, I'll give you instructions on how to cleanup all the tools and logs
  • Please stick with me until I give you the "all clear" and Please don't waste my time by leaving before that.
  • Your topic will be closed if you haven't replied within 3 days
  • (If I have not responded within 24 hours, please send me a Private Message as a reminder)
STEP 0

RKill is a program that was developed at BleepingComputer.com that attempts to terminate known malware processes

so that your normal security software can then run and clean your computer of infections.

When RKill runs it will kill malware processes and then removes incorrect executable associations and fixes policies

that stop us from using certain tools. When finished it will display a log file that shows the processes that were

terminated while the program was running.

As RKill only terminates a program's running process, and does not delete any files, after running it you should not reboot

your computer as any malware processes that are configured to start automatically will just be started again.

Instead, after running RKill you should immediately scan your computer using the requested scans I've included.

Please download Rkill by Grinler from one of the links below and save it to your desktop.

Link 1

Link 2

  • On Windows XP double-click on the Rkill desktop icon to run the tool.
  • On Windows Vista/Windows 7 or 8, right-click on the Rkill desktop icon and select Run As Administrator
  • A black DOS box will briefly flash and then disappear. This is normal and indicates the tool ran successfully.
  • If not, delete the file, then download and use the one provided in Link 2.
  • If it does not work, repeat the process and attempt to use one of the remaining links until the tool runs.
  • If the tool does not run from any of the links provided, please let me know.
  • Do not reboot the computer, you will need to run the application again.
STEP 01

Backup the Registry:

Modifying the Registry can create unforeseen problems, so it always wise to create a backup before doing so.

  • Please download ERUNT from one of the following links: Link1 | Link2 | Link3
  • ERUNT (Emergency Recovery Utility NT) is a free program that allows you to keep a complete backup of your registry and restore it when needed.
  • Double click on erunt-setup.exe to Install ERUNT by following the prompts.
  • NOTE: Do not choose to allow ERUNT to add an Entry to the Startup folder. Click NO.
  • Start ERUNT either by double clicking on the desktop icon or choosing to start the program at the end of the setup process.
  • Choose a location for the backup.
    • Note: the default location is C:\Windows\ERDNT which is acceptable.
  • Make sure that at least the first two check boxes are selected.
  • Click on OK
  • Then click on YES to create the folder.
  • Note: if it is necessary to restore the registry, open the backup folder and start ERDNT.exe
STEP 02

Please run a Threat Scan with MBAM. If you're unable to run or complete the scan as shown below please see the following: MBAM Clean Removal Process 2x

When reinstalling the program please try the latest version.

Right click and choose "Run as administrator" to open Malwarebytes Anti-Malware and from the Dashboard please Check for Updates by clicking the Update Now... link

Open up Malwarebytes > Settings > Detection and Protection > Enable Scan for rootkit and Under Non Malware Protection set both PUP and PUM to Treat detections as malware.

Click on the SCAN button and run a Threat Scan with Malwarebytes Anti-Malware by clicking the Scan Now>> button.

Once completed please click on the History > Application Logs and find your scan log and open it and then click on the "copy to clipboard" button and post back the results on your next reply.

Link to post
Share on other sites

  • 5 months later...

Due to the lack of feedback this topic is closed to prevent others from posting here. If you need this topic reopened, please send a Private Message to any one of the moderating team members. Please include a link to this thread with your request. This applies only to the originator of this thread.Other members who need assistance please start your own topic in a new thread. Thanks!

Link to post
Share on other sites

Guest
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
Back to top
×
×
  • Create New...

Important Information

This site uses cookies - We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.