Milk200 Posted October 24, 2015 ID:997616 Share Posted October 24, 2015 Hello, Yesterday, wanting to go to keepvid.com, I accidentally typed in keep-vid.com (POSSIBLE MALICIOUS LINK, DO NOT CLICK!). As soon as I typed in the wrong website, there were a couple of redirects. Forgot the website that I was redirected to, but I Googled it later and all the results said it was a malware site. I have deleted the history so cannot recall the site name. Running Farbar scan today and reading the log, I did not see anything for yesterday (admittedly I am without experience) but there are some SysWow64 and Sys32 lines on 15/10/2015 which I cannot explain.Thanks,Milk200 Link to post Share on other sites More sharing options...
kevinf80 Posted October 24, 2015 ID:997624 Share Posted October 24, 2015 Hello and welcome to Malwarebytes.orgP2P/Piracy Warning:If you're using Peer 2 Peer software such as uTorrent, BitTorrent or similar you must either fully uninstall them or completely disable them from running while being assisted here. Failure to remove or disable such software will result in your topic being closed and no further assistance being provided.If you have illegal/cracked software, cracks, keygens etc. on the system, please remove or uninstall them now and read the policy on Piracy.Next,Change the download folder setting in the default Browser so all tools we may use are saved to the Desktop:Google Chrome - Click the "Customize and control Google Chrome" button in the upper right-corner of the browser. Choose Settings. at the bottom of the screen click the"Show advanced settings..." link. Scroll down to find the Downloads section and click the Change... button. Select your desktop and click OK.Mozilla Firefox - Click the "Open Menu" button in the upper right-corner of the browser. Choose Options. In the downloads section, click the Browse button, click on the Desktop folder and the click the "Select Folder" button. Click OK to get out of the Options menu.Internet Explorer - Click the Tools menu in the upper right-corner of the browser. Select View downloads. Select the Options link in the lower left of the window. Click Browse and select the Desktop and then choose the Select Folder button. Click OK to get out of the download options screen and then click Close to get out of the View Downloads screen.NOTE: IE8 Does not support changing download locations in this manner. You will need to download the tool(s) to the default folder, usually Downloads, then copy them to the desktop.Next,Follow the instructions in the following link to show hidden files:http://www.bleepingcomputer.com/tutorials/how-to-see-hidden-files-in-windows/Next,Please open Malwarebytes Anti-Malware. On the Settings tab > Detection and Protection sub tab, Detection Options, tick the box "Scan for rootkits". Under Non-Malware Protection sub tab Change PUP and PUM entries to Treat detections as Malware Click on the Scan tab, then click on Scan Now >> . If an update is available, click the Update Now button. A Threat Scan will begin. With some infections, you may or may not see this message box. 'Could not load DDA driver' Click 'Yes' to this message, to allow the driver to load after a restart. Allow the computer to restart. Continue with the rest of these instructions. When the scan is complete, click Apply Actions. Wait for the prompt to restart the computer to appear, then click on Yes. After the restart once you are back at your desktop, open MBAM once more.To get the log from Malwarebytes do the following: Click on the History tab > Application Logs. Double click on the scan log which shows the Date and time of the scan just performed. Click Export > From export you have three options: Copy to Clipboard - if seleted right click to your reply and select "Paste" log will be pasted to your reply Text file (*.txt) - if selected you will have to name the file and save to a place of choice, recommend "Desktop" then attach to reply XML file (*.xml) - if selected you will have to name the file and save to a place of choice, recommend "Desktop" then attach to reply Recommend you use "Copy to Clipboard, then Right click to your reply > select "Paste" that will copy the log to your reply…If Malwarebytes is not installed follow these instructions first:Download Malwarebytes Anti-Malware to your desktop.Double-click mbam-setup and follow the prompts to install the program. At the end, be sure a checkmark is placed next to the following: Launch Malwarebytes Anti-Malware A 14 day trial of the Premium features is pre-selected. You may deselect this if you wish, and it will not diminish the scanning and removal capabilities of the program. Click Finish. Follow the instructions above....Next,Download Farbar Recovery Scan Tool and save it to your desktop.Note: You need to run the version compatible with your system (32 bit or 64 bit). If you are not sure which version applies to your system download both of them and try to run them. Only one of them will run on your system, that will be the right version.If your security alerts to FRST either accept the alert or disable your security and allow FRST to run...Double-click to run it. When the tool opens click Yes to disclaimer. Press Scan button. It will make a log (FRST.txt) in the same directory the tool is run. Please copy and paste it to your reply. The first time the tool is run, it makes also another log (Addition.txt). Please attach it to your reply.Next,Please download RogueKiller and save it to your desktop from the following link: http://www.bleepingcomputer.com/download/roguekiller/Quit all running programs. For Windows XP, double-click to start. For Vista,Windows 7/8/8.1/10, Right-click on the program and select Run as Administrator to start and when prompted allow it to run. Read and accept the EULA (End User Licene Agreement) Click Scan to scan the system. When the scan completes select "Report",in the next window select "Export txt" the log will open as a text file post that log... Also save to your Desktop for reference. log will open. Close the program > Don't Fix anything!Let me see those logs in your reply....Thank you,Kevin... Link to post Share on other sites More sharing options...
Milk200 Posted October 24, 2015 Author ID:997637 Share Posted October 24, 2015 Thanks for replying kevinf80 and for taking the time to help me.Here is the MalwareBytes log. The FRST log, Addition.txt and the Roguekiller Report are attached. Malwarebytes Anti-Malwarewww.malwarebytes.org Scan Date: 24/10/2015Scan Time: 16:17Logfile:Administrator: Yes Version: 2.2.0.1024Malware Database: v2015.10.24.02Rootkit Database: v2015.10.23.01License: FreeMalware Protection: DisabledMalicious Website Protection: DisabledSelf-protection: Disabled OS: Windows 8.1CPU: x64File System: NTFSUser: Milk200 Scan Type: Threat ScanResult: CompletedObjects Scanned: 337443Time Elapsed: 12 min, 4 sec Memory: EnabledStartup: EnabledFilesystem: EnabledArchives: EnabledRootkits: EnabledHeuristics: EnabledPUP: EnabledPUM: Enabled Processes: 0(No malicious items detected) Modules: 0(No malicious items detected) Registry Keys: 0(No malicious items detected) Registry Values: 0(No malicious items detected) Registry Data: 0(No malicious items detected) Folders: 0(No malicious items detected) Files: 0(No malicious items detected) Physical Sectors: 0(No malicious items detected) (end) FRST.txtAddition.txtRoguekiller Report.txt Link to post Share on other sites More sharing options...
kevinf80 Posted October 24, 2015 ID:997644 Share Posted October 24, 2015 Thanks for those logs, do not see any obvious malware/infection. Continue please: Download AdwCleaner by Xplode onto your Desktop. Double click on Adwcleaner.exe to run the tool. Click on the Scan in the Actions box Please wait fot the scan to finish.. When "Waiting for action.Please uncheck elements you want to keep" shows in top line.. Click on the Cleaning box. Next click OK on the "Closing Programs" pop up box. Click OK on the Information box & again OK to allow the necessary reboot After restart the AdwCleaner(C*)-Notepad log will appear, please copy/paste it in your next reply. Where * is the number relative to list of scans completed... Next, Please download Junkware Removal Tool to your desktop.Shut down your protection software now to avoid potential conflicts. (re-enable when done) Run the tool by double-clicking it. If you are using Windows Vista, 7, or 8; instead of double-clicking, right-mouse click JRT.exe and select "Run as Administrator". The tool will open and start scanning your system. Please be patient as this can take a while to complete depending on your system's specifications. On completion, a log (JRT.txt) is saved to your desktop and will automatically open. Post the contents of JRT.txt into your next message. Next, Please download Kaspersky Virus Removal Tool from http://devbuilds.kaspersky-labs.com/devbuilds/KVRT/latest/full/KVRT.exe Right click on KVRT.exe and select Run as Administrator. Read the EULA, then select Accept. Wait for Kaspersky Virus Removal Tool to initialize. In the main screen, select Change parameters, place a checkmark in System drive, then click OK. Click Start scan. Wait for Kaspersky Virus Removal Tool to complete scanning. When the scan is finished, select Neutralize all for all detected objects. When complete select "Reports" from the main interface, the log will be saved in a text file. Let me see that log... (If nothing is found there will be no report) Close Kaspersky Virus Removal Tool when done. Let me see those logs, also give an update on any remaining issues or concerns... Thank you, Kevin.... Link to post Share on other sites More sharing options...
Milk200 Posted October 24, 2015 Author ID:997660 Share Posted October 24, 2015 Thanks Kevin.Here is first the Adwcleaner log: # AdwCleaner v5.014 - Logfile created 24/10/2015 at 20:41:36# Updated 18/10/2015 by Xplode# Database : 2015-10-18.5 [server]# Operating system : Windows 8.1 (x64)# Username : Milk200 - LAPTOP# Running from : C:\Users\Milk200\Desktop\AdwCleaner.exe# Option : Cleaning# Support : http://toolslib.net/forum***** [ Services ] ********** [ Folders ] ********** [ Files ] ********** [ DLLs ] ********** [ Shortcuts ] ********** [ Scheduled tasks ] ********** [ Registry ] ********** [ Web browsers ] ******************************:: Winsock settings cleared########## EOF - C:\AdwCleaner\AdwCleaner[C1].txt - [638 bytes] ########## And here is the Junkware Removal Tool log:~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~Junkware Removal Tool (JRT) by MalwarebytesVersion: 7.6.4 (09.28.2015:1)OS: Windows 8.1 x64Ran by Milk200 on 24/10/2015 at 20:45:50.06~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Services~~~ Tasks~~~ Registry Values~~~ Registry Keys~~~ Files~~~ Folders~~~ FireFoxSuccessfully deleted: [File] C:\Users\Milk200\AppData\Roaming\mozilla\firefox\profiles\b6ejo2w2.default\searchplugins\youtube-video-search.xmlEmptied folder: C:\Users\Milk200\AppData\Roaming\mozilla\firefox\profiles\b6ejo2w2.default\minidumps [33 files]~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~Scan was completed on 24/10/2015 at 20:47:43.29End of JRT log~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ There was nothing detected by Kaspersky Virus Removal Tool and no log generated for that one. I have not experienced any issues or problems, too.Thanks, Milk Link to post Share on other sites More sharing options...
kevinf80 Posted October 24, 2015 ID:997679 Share Posted October 24, 2015 Thanks for the logs and the update, as we can not find any malware or infection on your system we can clean up.... Download "Delfix by Xplode" and save it to your desktop.Or use the following if first link is down:"Delfix link mirror"Double Click to start the program. If you are using Vista or higher, please right-click and choose run as administratorMake Sure the following items are checked: Remove disinfection tools Purge System Restore <--- this will remove all previous and possibly exploited restore points, a new point relative to system status at present will be created. Reset system settingsNow click on "Run" and wait patiently until the tool has completed.The tool will create a log when it has completed. We don't need you to post this.Any remnant files/logs from tools we have used can be deleted… Next, Read the following links to fully understand PC Security and Best Practices, you may find them useful....Answers to Common Security Questions and best PracticesDo I need a Registry Cleaner?Take care and surf safeKevin... Link to post Share on other sites More sharing options...
Milk200 Posted October 25, 2015 Author ID:997736 Share Posted October 25, 2015 Completed running Delfix. Thanks Kevin for all your help, it is much appreciated. Link to post Share on other sites More sharing options...
kevinf80 Posted October 25, 2015 ID:997775 Share Posted October 25, 2015 You`re very welcome... Link to post Share on other sites More sharing options...
Root Admin AdvancedSetup Posted October 27, 2015 Root Admin ID:998085 Share Posted October 27, 2015 Glad we could help. If you need this topic reopened, please send a Private Message to any one of the moderating team members. Please include a link to this thread with your request. This applies only to the originator of this thread. Other members who need assistance please start your own topic in a new thread. Thanks! Link to post Share on other sites More sharing options...
Recommended Posts