Jump to content

Help, I think my PC is infected with malware but malwarebytes isn't finding it

MissRaziel

By MissRaziel
in Resolved Malware Removal Logs

 Share

Recommended Posts

MissRaziel

MissRaziel

Posted
Posted

Hello

I recently bought malwarebytes because I picked up some malware from a daemon tools free program, called buzzdock, and before that was rooted out, a program called magic ads, both of which now no longer show up on websites as annoying side ads, but my computer is still acting strangely, it won't load webside thumbnails and takes a while to boot up when turned on,

 

I have an SSD drive so it's supposed to be really swift, but it's sluggish and with the website display problems after updating my browser and flash, I suspect there's something on my PC that is hiding from scans. As I said, malwarebytes says my PC is clean after a custom scan of every inch of the drives, and Avast finds nothing, I even ran the microsoft malicious tool scanner and that too found nothing, I need some help please....

Link to post
Share on other sites
kevinf80

kevinf80

Posted
Posted

Hello and welcome to Malwarebytes.org

P2P/Piracy Warning:

If you're using Peer 2 Peer software such as uTorrent, BitTorrent or similar you must either fully uninstall them or completely disable them from running while being assisted here. Failure to remove or disable such software will result in your topic being closed and no further assistance being provided.If you have illegal/cracked software, cracks, keygens etc. on the system, please remove or uninstall them now and read the policy on Piracy.


Next,

Change the download folder setting in the default Browser so all tools we may use are saved to the Desktop:

Chrome.JPGGoogle Chrome - Click the "Customize and control Google Chrome" button in the upper right-corner of the browser. Settings.JPG
Choose Settings. at the bottom of the screen click the
"Show advanced settings..." link. Scroll down to find the Downloads section and click the Change... button. Select your desktop and click OK.

Firefox.JPGMozilla Firefox - Click the "Open Menu" button in the upper right-corner of the browser. Settings.JPG Choose Options. In the downloads section, click the Browse button, click on the Desktop folder and the click the "Select Folder" button. Click OK to get out of the Options menu.

IE.jpgInternet Explorer - Click the Tools menu in the upper right-corner of the browser. Tools.JPG Select View downloads. Select the Options link in the lower left of the window. Click Browse and select the Desktop and then choose the Select Folder button. Click OK to get out of the download options screen and then click Close to get out of the View Downloads screen.
NOTE: IE8 Does not support changing download locations in this manner. You will need to download the tool(s) to the default folder, usually Downloads, then copy them to the desktop.

Next,

Follow the instructions in the following link to show hidden files:

http://www.bleepingcomputer.com/tutorials/how-to-see-hidden-files-in-windows/

Next,

Please open Malwarebytes Anti-Malware.

  • On the Settings tab > Detection and Protection sub tab, Detection Options, tick the box "Scan for rootkits".
  • Under Non-Malware Protection sub tab Change PUP and PUM entries to Treat detections as Malware
  • Click on the Scan tab, then click on Scan Now >> . If an update is available, click the Update Now button.
  • A Threat Scan will begin.
  • With some infections, you may or may not see this message box.

            'Could not load DDA driver'
  • Click 'Yes' to this message, to allow the driver to load after a restart.
  • Allow the computer to restart. Continue with the rest of these instructions.
  • When the scan is complete, click Apply Actions.
  • Wait for the prompt to restart the computer to appear, then click on Yes.
  • After the restart once you are back at your desktop, open MBAM once more.



To get the log from Malwarebytes do the following:

  • Click on the History tab > Application Logs.
  • Double click on the scan log which shows the Date and time of the scan just performed.
  • Click Export > From export you have three options:

      Copy to Clipboard - if seleted right click to your reply and select "Paste" log will be pasted to your reply
      Text file (*.txt)        - if selected you will have to name the file and save to a place of choice, recommend "Desktop" then attach to reply
      XML file (*.xml)      - if selected you will have to name the file and save to a place of choice, recommend "Desktop" then attach to reply
  • Recommend you use "Copy to Clipboard, then Right click to your reply > select "Paste" that will copy the log to your reply…




If Malwarebytes is not installed follow these instructions first:

Download Malwarebytes Anti-Malware to your desktop.

  • Double-click mbam-setup and follow the prompts to install the program.
  • At the end, be sure a checkmark is placed next to the following:
  • Launch Malwarebytes Anti-Malware
  • A 14 day trial of the Premium features is pre-selected. You may deselect this if you wish, and it will not diminish the scanning and removal capabilities of the program.
  • Click Finish. Follow the instructions above....


Next,

Download Farbar Recovery Scan Tool and save it to your desktop.

Note: You need to run the version compatible with your system (32 bit or 64 bit). If you are not sure which version applies to your system download both of them and try to run them. Only one of them will run on your system, that will be the right version.

If your security alerts to FRST either accept the alert or disable your security and allow FRST to run...

  • Double-click to run it. When the tool opens click Yes to disclaimer.
  • Press Scan button.
  • It will make a log (FRST.txt) in the same directory the tool is run. Please copy and paste it to your reply.
  • The first time the tool is run, it makes also another log (Addition.txt). Please attach it to your reply.



Next,

Please download RogueKiller and save it to your desktop from the following link: http://www.bleepingcomputer.com/download/roguekiller/

  • Quit all running programs.
  • For Windows XP, double-click to start.
  • For Vista,Windows 7/8/8.1/10, Right-click on the program and select Run as Administrator to start and when prompted allow it to run.
  • Read and accept the EULA (End User Licene Agreement)
  • Click Scan to scan the system.
  • When the scan completes select "Report",in the next window select "Export txt" the log will open as a text file post that log... Also save to your Desktop for reference. log will open.
  • Close the program > Don't Fix anything!



Let me see those logs in your reply....

Thank you,

Kevin...
 

Link to post
Share on other sites
kevinf80

kevinf80

Posted
Posted

Roguekiller has not found anything malicious, when processes are terminated is done to allow RK to run unhindered. When you see entries like you have for Malwarebytes the code number at the end is the clue.. Yours is safe...

 

I do see that you have Avast Firewall installed and running, Windows own Firewall is also showing as "active" that is not good, two FW will clash and cause problems for your system.

 

If you intend keeping Avast then you need to turn off the windows FW. In the search function type or copy paste services.msc click on enter to open the services window.

 

Scroll down to Windows FW, right click on that entry then select "Properties" In that window change the startup type to "Disabled" click on apply then OK. Close those windows and re-boot..

 

Next,

 

Download attached fixlist.txt file (end of reply) and save it to the Desktop, or the folder you saved FRST into.
NOTE. It's important that both FRST and fixlist.txt are in the same location or the fix will not work.

Run FRST and press the Fix button just once and wait.
The tool will make a log on the Desktop (Fixlog.txt) or the folder it was ran from. Please post it to your reply.

 

Next,

 

Download AdwCleaner by Xplode onto your Desktop.

  • Double click on Adwcleaner.exe to run the tool.
  • Click on the Scan in the Actions box
  • Please wait fot the scan to finish..
  • When "Waiting for action.Please uncheck elements you want to keep" shows in top line..
  • Click on the Cleaning box.
  • Next click OK on the "Closing Programs" pop up box.
  • Click OK on the Information box & again OK to allow the necessary reboot
  • After restart the AdwCleaner(C*)-Notepad log will appear, please copy/paste it in your next reply. Where * is the number relative to list of scans completed...


Next,
 
thisisujrt.gif Please download Junkware Removal Tool to your desktop.

  • Shut down your protection software now to avoid potential conflicts. (re-enable when done)
  • Run the tool by double-clicking it. If you are using Windows Vista, 7, or 8; instead of double-clicking, right-mouse click JRT.exe and select "Run as Administrator".
  • The tool will open and start scanning your system.
  • Please be patient as this can take a while to complete depending on your system's specifications.
  • On completion, a log (JRT.txt) is saved to your desktop and will automatically open.
  • Post the contents of JRT.txt into your next message.



Next,

 

Download Microsoft's " Malicious Software Removal Tool" and save direct to the desktop

Ensure to get the correct version for your system....

32 Bit version:
https://www.microsoft.com/downloads/en/confirmation.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

64 Bit version:
https://www.microsoft.com/downloads/en/confirmation.aspx?FamilyId=585D2BDE-367F-495E-94E7-6349F4EFFC74&displaylang=en

Right click on the Tool, select “Run as Administrator” the tool will expand to the options Window
In the "Scan Type" window, select Quick Scan
Perform a scan and  Click Finish when the scan is done.

Retrieve the MSRT log as follows, and post it in your next reply:

1) Select the Windows key and R key together to open the "Run" function
2) Type or Copy/Paste the following command to the "Run Line" and Press Enter:

notepad c:\windows\debug\mrt.log

Let me see those logs, also give an update on any remaining issues or concerns...

 

Thank you,

 

Kevin...
 

Fixlist.txt

Link to post
Share on other sites
kevinf80

kevinf80

Posted
Posted

Check out the following link, does this describe your issue with websites?

 

http://www.winhelponline.com/articles/202/1/PNG-images-are-not-displayed-on-Web-sites-in-Internet-Explorer.html

 

Regarding the sluggish startup, use the instructions at the following link to run your system in a "Clean Boot" mode, does that make any difference?

 

http://windowsinstructed.com/clean-boot-windows-windows/?bm_opted_out=true

Link to post
Share on other sites
kevinf80

kevinf80

Posted
Posted

Have you left your system in clean boot mode? or did you follow the instructions to whichever service was causing the sluggish start. It will need to be put back in Normal mode eventually..

 

All we need to do after that is clean up as follows:

 

Download "Delfix by Xplode" and save it to your desktop.

Or use the following if first link is down:

"Delfix link mirror"

Double Click to start the program. If you are using Vista or higher, please right-click and choose run as administrator

Make Sure the following items are checked:



  •    
  • Remove disinfection tools
       
  • Purge System Restore <--- this will remove all previous and possibly exploited restore points, a new point relative to system status at present will be created.
       
  • Reset system settings



Now click on "Run" and wait patiently until the tool has completed.

The tool will create a log when it has completed. We don't need you to post this.

Any remnant files/logs from tools we have used can be deleted…
 

Next,

 

Read the following links to fully understand PC Security and Best Practices, you may find them useful....

Answers to Common Security Questions and bst Practices

Do I need a Registry Cleaner?
 

Let me know if we are ok to close out..

 

Thank you,

 

Kevin....

Link to post
Share on other sites
  • Root Admin
AdvancedSetup

AdvancedSetup

Posted
  • Root Admin
Posted

Glad we could help. :)

If you need this topic reopened, please send a Private Message to any one of the moderating team members. Please include a link to this thread with your request. This applies only to the originator of this thread.

Other members who need assistance please start your own topic in a new thread. Thanks!

Link to post
Share on other sites
Guest
This topic is now closed to further replies.
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.
Back to top
×
×
  • Create New...

Important Information

This site uses cookies - We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.