Jump to content

unable to connect to internet

najash334

By najash334
in Resolved Malware Removal Logs

 Share

Recommended Posts

najash334

najash334

Posted
Posted

Hello, I was wondering if someone out there can be of assistance. I tried removing YouTube Accelerator with Revo and was unsuccessful in fully removing the program. I restarted my computer in safe mode and was finally able to delete it. Since then, I cannot connect to the internet at all. I Firefox goes to the main page, but won't go to any other webpages. Skype will not launch and IE cannot connect to the internet. Any suggestions?

Link to post
Share on other sites
kevinf80

kevinf80

Posted
Posted

Hello and welome najash334,

 

P2P/Piracy Warning:

 

If you're using Peer 2 Peer software such as uTorrent, BitTorrent or similar you must either fully uninstall them or completely disable them from running while being assisted here.Failure to remove or disable such software will result in your topic being closed and no further assistance being provided.If you have illegal/cracked software, cracks, keygens etc. on the system, please remove or uninstall them now and read the policy on Piracy.

 

As you have opened a thread I assume you have access via another PC, if so d/l the following and transfer to sick PC, trans fer logs and post for me to see...

 

Download Farbar Recovery Scan Tool save to flash drive, transfer it to your desktop od sick PC.

 

Note: You need to run the version compatible with your system (32 bit or 64 bit). If you are not sure which version applies to your system download both of them and try to run them. Only one of them will run on your system, that will be the right version.


Double-click to run it. When the tool opens click Yes to disclaimer.
Press Scan button.
It will make a log (FRST.txt) in the same directory the tool is run. Please copy and paste it to your reply.
The first time the tool is run, it makes also another log (Addition.txt). Please attach it to your reply.

 

Next,

 

Download Farbar Service Scanner from here: http://www.bleepingcomputer.com/download/farbar-service-scanner/dl/62/ and run it on the computer with the issue.

Make sure the following options are checked:

 


Internet Services
Windows Firewall
System Restore
Security Center/Action Center
Windows Update
Windows Defender

 


Press "Scan".
It will create a log (FSS.txt) in the same directory the tool is run.
Please copy and paste the log to your reply.

 

Thanks,

 

Kevin

Link to post
Share on other sites
kevinf80

kevinf80

Posted
Posted

FSS log shows the internet connection is OK, is that correct?

 

Download attached fixlist.txt file (end of reply) and save it to the Desktop, or the folder you saved FRST into.

NOTE. It's important that both FRST and fixlist.txt are in the same location or the fix will not work.

 

Run FRST and press the Fix button just once and wait.

The tool will make a log on the Desktop (Fixlog.txt) or the folder it was ran from. Please post it to your reply.

 

Next,

 

Download Malwarebytes Anti-Malware to your desktop.


Double-click mbam-setup and follow the prompts to install the program.
At the end, be sure a checkmark is placed next to the following:
Launch Malwarebytes Anti-Malware
A 14 day trial of the Premium features is pre-selected. You may deselect this if you wish, and it will not diminish the scanning and removal capabilities of the program.
Click Finish.
On the Dashboard, click the 'Update Now >>' link
After the update completes Select > Settings > Detection and Protection > Enable Scan for rootkit and Under Non Malware Protection set both PUP and PUM to Treat detections as malware.
Now select > Scan > Threat scan > Scan now
When the scan is complete, if there have been detections, click Apply Actions to allow MBAM to clean what was detected.
In most cases, a restart will be required.
Wait for the prompt to restart the computer to appear, then click on Yes.

 

When the scan is completed from the main GUI click on History > Application Logs. Find your scan log, the date when run will identify it. Checkmark "select" box > then hit the "view" button. The history log window will open. At the bottom of that window are two options, "Copy to clipboard" and "Export"

Select > "Copy to clipboard" that copies the full log to the windows clipboard, so at your reply you right click into the text field and select "Paste" the log is pasted (copied) to  your reply.

 

Next,

 

Download AdwCleaner by Xplode onto your Desktop.


Double click on Adwcleaner.exe to run the tool.
Click on Scan
Once the scan is done, click on the Clean button.
You will get a prompt asking to close all programs. Click OK.
Click OK again to reboot your computer.
A text file will open after the restart. Please post the content of that logfile in your reply.
You can also find the logfile at C:\AdwCleaner[sn].txt. Where n in the scan reference number

 

Next,

 

thisisujrt.gif Please download Junkware Removal Tool to your desktop.


Shut down your protection software now to avoid potential conflicts. (re-enable when done)
Run the tool by double-clicking it. If you are using Windows Vista, 7, or 8; instead of double-clicking, right-mouse click JRT.exe and select "Run as Administrator".
The tool will open and start scanning your system.
Please be patient as this can take a while to complete depending on your system's specifications.
On completion, a log (JRT.txt) is saved to your desktop and will automatically open.
Post the contents of JRT.txt into your next message.

 

Next,

 

Download Microsoft's " Malicious Software Removal Tool" and save direct to the desktop

Ensure to get the correct version for your system....

32 Bit version:

https://www.microsoft.com/downloads/en/confirmation.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

64 Bit version:

https://www.microsoft.com/downloads/en/confirmation.aspx?FamilyId=585D2BDE-367F-495E-94E7-6349F4EFFC74&displaylang=en'>https://www.microsoft.com/downloads/en/confirmation.aspx?FamilyId=585D2BDE-367F-495E-94E7-6349F4EFFC74&displaylang=en

 

Right click on the Tool, select “Run as Administrator” the tool will expand to the options Window

In the "Scan Type" window, select Quick Scan

Perform a scan and  Click Finish when the scan is done.

Retrieve the MSRT log as follows, and post it in your next reply:

 

1) Select the Windows key and R key together to open the "Run" function

2) Type or Copy/Paste the following command to the "Run Line" and Press Enter:

 

notepad c:\windows\debug\mrt.log

 

Let me see those logs, also give an update on any remaining issues or concerns...

 

Thanks,

 

Kevin..

 

 

 

Fixlist.txt

Link to post
Share on other sites
Naathim

Naathim

Posted
Posted

Glad we could help. :)

If you need this topic reopened, please send a Private Message to any one of the moderating team members. Please include a link to this thread with your request. This applies only to the originator of this thread.

Other members who need assistance please start your own topic in a new thread. Thanks!

Link to post
Share on other sites
Guest
This topic is now closed to further replies.
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.
Back to top
×
×
  • Create New...

Important Information

This site uses cookies - We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.