"Bad Image" pop-ups after using Malwarebytes

[chronosXIV]

Hello there. So, as I was trying to fix the adobe flash player update redirecting virus, I used Malwarebytes to scan and delete all threats. And then when I restarted my computer I started getting bad image errors. I have FRST downloaded and ready to scan & paste the FRST.txt and Addition.txt files. pls help

 

i tried system restore, disc check, and sfc /scannow, none solved it. i cant repair install as my laptop(therefore the software) is originally owned by my college

 

thanks in advance

[kevinf80]

Hello and welome,

 

P2P/Piracy Warning:

 

If you're using Peer 2 Peer software such as uTorrent, BitTorrent or similar you must either fully uninstall them or completely disable them from running while being assisted here.Failure to remove or disable such software will result in your topic being closed and no further assistance being provided.If you have illegal/cracked software, cracks, keygens etc. on the system, please remove or uninstall them now and read the policy on Piracy.

 

Download Farbar Recovery Scan Tool and save it to your desktop.

 

Note: You need to run the version compatible with your system (32 bit or 64 bit). If you are not sure which version applies to your system download both of them and try to run them. Only one of them will run on your system, that will be the right version.

• 
  

Double-click to run it. When the tool opens click Yes to disclaimer.
Press Scan button.
It will make a log (FRST.txt) in the same directory the tool is run. Please copy and paste it to your reply.
The first time the tool is run, it makes also another log (Addition.txt). Please attach it to your reply.

 

Next,

 

Please download RogueKiller and save it to your desktop from the following link: http://www.bleepingcomputer.com/download/roguekiller/

 

• 
  

Quit all running programs.
For Windows XP, double-click to start.
For Vista,Windows 7/8, Right-click on the program and select Run as Administrator to start and when prompted allow it to run.
Read and accept the EULA (End User Licene Agreement)
Click Scan to scan the system.
When the scan completes select "Report", log will open. Close the program > Don't Fix anything!
Post back the report which should also be located here:

 

C:\Programdata\RogueKiller\Logs <-------- W7/8

C:\Documents and Settings\All Users\Application Data\RogueKiller\Logs <------XP

 

Let me see those logs in your reply...

 

Kevin...

[chronosXIV]

Addition.txtFRST.txt hellloo!! here are my scans

 

okay i couldnt for some reason upload the report as an attachment so here it is:

 

 

 

RogueKiller V10.1.1.0 [Dec 23 2014] by Adlice Software

mail : http://www.adlice.com/contact/

Feedback : http://forum.adlice.com

Website : http://www.adlice.com/softwares/roguekiller/

Blog : http://www.adlice.com

 

Operating System : Windows 7 (6.1.7601 Service Pack 1) 32 bits version

Started in : Normal mode

User : JUD13139678 [Administrator]

Mode : Scan -- Date : 12/26/2014  17:31:36

 

¤¤¤ Processes : 0 ¤¤¤

 

¤¤¤ Registry : 9 ¤¤¤

[suspicious.Path] HKEY_USERS\S-1-5-21-1661950849-4220440270-2738518411-1003\Software\Microsoft\Windows\CurrentVersion\Run | YijjOdref : regsvr32.exe "C:\ProgramData\YijjOdref\QiciDzaza.yqr"  -> Found

[PUM.Proxy] HKEY_USERS\S-1-5-21-1661950849-4220440270-2738518411-1003\Software\Microsoft\Windows\CurrentVersion\Internet Settings | ProxyEnable : 1  -> Found

[PUM.Proxy] HKEY_USERS\S-1-5-21-1661950849-4220440270-2738518411-1003\Software\Microsoft\Windows\CurrentVersion\Internet Settings | ProxyServer : http=127.0.0.1:49170;https=127.0.0.1:49170  -> Found

[PUM.Dns] HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\{FEE6E0D9-2756-4F50-A3C8-0D22A3F56C58} | DhcpNameServer : 10.80.2.8 10.90.2.102 [(Private Address) (XX)][(Private Address) (XX)]  -> Found

[PUM.Dns] HKEY_LOCAL_MACHINE\System\ControlSet001\Services\Tcpip\Parameters\Interfaces\{FEE6E0D9-2756-4F50-A3C8-0D22A3F56C58} | DhcpNameServer : 10.80.2.8 10.90.2.102 [(Private Address) (XX)][(Private Address) (XX)]  -> Found

[PUM.Dns] HKEY_LOCAL_MACHINE\System\ControlSet002\Services\Tcpip\Parameters\Interfaces\{FEE6E0D9-2756-4F50-A3C8-0D22A3F56C58} | DhcpNameServer : 10.80.2.8 10.90.2.102 [(Private Address) (XX)][(Private Address) (XX)]  -> Found

[PUM.StartMenu] HKEY_USERS\S-1-5-21-1661950849-4220440270-2738518411-1003\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced | Start_ShowMyGames : 0  -> Found

[PUM.DesktopIcons] HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Explorer\HideDesktopIcons\NewStartPanel | {20D04FE0-3AEA-1069-A2D8-08002B30309D} : 1  -> Found

[PUM.DesktopIcons] HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Explorer\HideDesktopIcons\NewStartPanel | {59031a47-3f72-44a7-89c5-5595fe6b30ee} : 1  -> Found

 

¤¤¤ Tasks : 0 ¤¤¤

 

¤¤¤ Files : 0 ¤¤¤

 

¤¤¤ Hosts File : 0 ¤¤¤

 

¤¤¤ Antirootkit : 0 (Driver: Loaded) ¤¤¤

 

¤¤¤ Web browsers : 0 ¤¤¤

 

¤¤¤ MBR Check : ¤¤¤

+++++ PhysicalDrive0: ST320LM001 HN-M320MBB +++++

--- User ---

[MBR] f9621b844df091d41efb66f3cc5db305

[bSP] 4a069ca4ec8b7790fe10fbe6a2f6bd2e : Windows Vista/7/8 MBR Code

Partition table:

0 - [ACTIVE] NTFS (0x7) [VISIBLE] Offset (sectors): 2048 | Size: 499 MB

1 - [XXXXXX] NTFS (0x7) [VISIBLE] Offset (sectors): 1024000 | Size: 304744 MB

User = LL1 ... OK

User = LL2 ... OK

 

[kevinf80]

Download attached fixlist.txt file (end of reply) and save it to the Desktop, or the folder you saved FRST into.

NOTE. It's important that both FRST and fixlist.txt are in the same location or the fix will not work.

 

Run FRST and press the Fix button just once and wait.

The tool will make a log on the Desktop (Fixlog.txt) or the folder it was ran from. Please post it to your reply.

 

Next,

 

Download Malwarebytes Anti-Malware to your desktop.

• 
  

Double-click mbam-setup and follow the prompts to install the program.
At the end, be sure a checkmark is placed next to the following:
Launch Malwarebytes Anti-Malware
A 14 day trial of the Premium features is pre-selected. You may deselect this if you wish, and it will not diminish the scanning and removal capabilities of the program.
Click Finish.
On the Dashboard, click the 'Update Now >>' link
After the update completes Select > Settings > Detection and Protection > Enable Scan for rootkit and Under Non Malware Protection set both PUP and PUM to Treat detections as malware.
Now select > Scan > Threat scan > Scan now
When the scan is complete, if there have been detections, click Apply Actions to allow MBAM to clean what was detected.
In most cases, a restart will be required.
Wait for the prompt to restart the computer to appear, then click on Yes.

 

When the scan is completed from the main GUI click on History > Application Logs. Find your scan log, the date when run will identify it. Checkmark "select" box > then hit the "view" button. The history log window will open. At the bottom of that window are two options, "Copy to clipboard" and "Export"

Select > "Copy to clipboard" that copies the full log to the windows clipboard, so at your reply you right click into the text field and select "Paste" the log is pasted (copied) to  your reply.

 

Or select "Export" you are given the option to export as a Text file (*.txt) or XML file (*.xml) Choose text file, save the exported file to a place of your choice. That file can be attached to your reply...

 

Next,

 

Download AdwCleaner by Xplode onto your Desktop.

• 
  

Double click on Adwcleaner.exe to run the tool.
Click on Scan
Once the scan is done, click on the Clean button.
You will get a prompt asking to close all programs. Click OK.
Click OK again to reboot your computer.
A text file will open after the restart. Please post the content of that logfile in your reply.
You can also find the logfile at C:\AdwCleaner[sn].txt. Where n in the scan reference number

 

Next,

 

Please download Junkware Removal Tool to your desktop.

• 
  

Shut down your protection software now to avoid potential conflicts. (re-enable when done)
Run the tool by double-clicking it. If you are using Windows Vista, 7, or 8; instead of double-clicking, right-mouse click JRT.exe and select "Run as Administrator".
The tool will open and start scanning your system.
Please be patient as this can take a while to complete depending on your system's specifications.
On completion, a log (JRT.txt) is saved to your desktop and will automatically open.
Post the contents of JRT.txt into your next message.

 

Next,

 

Download Microsoft's " Malicious Software Removal Tool" and save direct to the desktop

Ensure to get the correct version for your system....

32 Bit version:

https://www.microsoft.com/downloads/en/confirmation.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

64 Bit version:

https://www.microsoft.com/downloads/en/confirmation.aspx?FamilyId=585D2BDE-367F-495E-94E7-6349F4EFFC74&displaylang=en'>https://www.microsoft.com/downloads/en/confirmation.aspx?FamilyId=585D2BDE-367F-495E-94E7-6349F4EFFC74&displaylang=en

 

Right click on the Tool, select “Run as Administrator” the tool will expand to the options Window

In the "Scan Type" window, select Quick Scan

Perform a scan and  Click Finish when the scan is done.

Retrieve the MSRT log as follows, and post it in your next reply:

 

1) Select the Windows key and R key together to open the "Run" function

2) Type or Copy/Paste the following command to the "Run Line" and Press Enter:

 

notepad c:\windows\debug\mrt.log

 

Next,

 

Download Security Check by screen317 from either of the following:

http://screen317.spywareinfoforum.org/SecurityCheck.exe or http://screen317.changelog.fr/SecurityCheck.exe

Save it to your Desktop. (If your security alerts either accept the alert, or turn the security off while Secuirity Check runs)
Double click SecurityCheck.exe (Vista or Windows 7/8 users right click and select "Run as Administrator") and follow the onscreen instructions inside of the black box. Press any key when asked.
A Notepad document should open automatically called checkup.txt; please post the contents of that document.

If Security Check will not run or you get an alert saying it is not supported, Re-boot your PC then try again...
 

Let me see those logs in your next reply, also give an update on any remaining issues or concerns...

 

Thanks,

 

Kevin

 

 

 

 

Fixlist.txt

[AdvancedSetup]

Due to the lack of feedback this topic is closed to prevent others from posting here. If you need this topic reopened, please send a Private Message to any one of the moderating team members. Please include a link to this thread with your request. This applies only to the originator of this thread.

Other members who need assistance please start your own topic in a new thread. Thanks!