Jump to content
Due to inclement weather in Southwest Florida, our Clearwater support team is offline. Our other offices are available to assist you, however their responses may be delayed. We appreciate your patience and understanding during this time. ×

I'm infected, need help :(


DDukaj15
 Share

Recommended Posts

Hello, my computer seems to be severely infected. I currently have Avast and Malwarebytes protecting my computer because I constantly (every 1-2 minutes) receive notifications about Malicious Websites being blocked. Always outbound, usually the process is from a Windows SysWow64 dllhost. it is slowing my computer down tremendously and making it almost unusable. An example would be IP- 195.2.241.167 port 65015. I can't tell if it's always the same few or random each time. the wondows system dll is nearly always referenced. Avast blocks random web sites such as go.wvydeo.com and more. I have never heard of any of these sites nor have I visited them.

 

Attached are my FRST and Addition logs:

FRST.txt

Addition.txt

Link to post
Share on other sites

Hello and welome,

 

P2P/Piracy Warning:

 

 

If you're using Peer 2 Peer software such as uTorrent, BitTorrent or similar you must either fully uninstall them or completely disable them from running while being assisted here.Failure to remove or disable such software will result in your topic being closed and no further assistance being provided.If you have illegal/cracked software, cracks, keygens etc. on the system, please remove or uninstall them now and read the policy on Piracy.

 

 

Next,

 

Download attached fixlist.txt file (end of reply) and save it to the Desktop, or the folder you saved FRST into.

NOTE. It's important that both FRST and fixlist.txt are in the same location or the fix will not work.

 

Run FRST and press the Fix button just once and wait.

The tool will make a log on the Desktop (Fixlog.txt) or the folder it was ran from. Please post it to your reply.

 

Next,

 

Open Malwarebytes Anti-Malware, from the Dashboard please Check for Updates by clicking the Update Now... link

When the update completes select > Settings > Detection and Protection > Enable Scan for rootkit and Under Non Malware Protection set both PUP and PUM to Treat detections as malware.

 

 

Click on the SCAN button and run a Threat Scan with Malwarebytes Anti-Malware by clicking the Scan Now>> button.

 

When the scan is complete, if there have been detections, click Apply Actions to allow MBAM to clean what was detected.

 

 

In most cases, a restart will be required.

 

 

Wait for the prompt to restart the computer to appear, then click on Yes.

 

 

When the scan is completed from the main GUI click on History > Application Logs. Find your scan log, the date when run will identify it. Checkmark "select" box > then hit the "view" button. The history log window will open. At the bottom of that window are two options, "Copy to clipboard" and "Export"

Select > "Copy to clipboard" that copies the full log to the windows clipboard, so at your reply you right click into the text field and select "Paste" the log is pasted (copied) to  your reply.

 

Or select "Export" you are given the option to export as a Text file (*.txt) or XML file (*.xml) Choose text file, save the exported file to a place of your choice. That file can be attached to your reply...

 

Next,

 

Download AdwCleaner by Xplode onto your Desktop.


Double click on Adwcleaner.exe to run the tool.
Click on Scan
Once the scan is done, click on the Clean button.
You will get a prompt asking to close all programs. Click OK.
Click OK again to reboot your computer.
A text file will open after the restart. Please post the content of that logfile in your reply.
You can also find the logfile at C:\AdwCleaner[sn].txt. Where n in the scan reference number

 

Next,

 

thisisujrt.gif Please download Junkware Removal Tool to your desktop.


Shut down your protection software now to avoid potential conflicts. (re-enable when done)
Run the tool by double-clicking it. If you are using Windows Vista, 7, or 8; instead of double-clicking, right-mouse click JRT.exe and select "Run as Administrator".
The tool will open and start scanning your system.
Please be patient as this can take a while to complete depending on your system's specifications.
On completion, a log (JRT.txt) is saved to your desktop and will automatically open.
Post the contents of JRT.txt into your next message.

 

Next,

 

Download Microsoft's " Malicious Software Removal Tool" and save direct to the desktop

Ensure to get the correct version for your system....

32 Bit version:

https://www.microsoft.com/downloads/en/confirmation.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

64 Bit version:

https://www.microsoft.com/downloads/en/confirmation.aspx?FamilyId=585D2BDE-367F-495E-94E7-6349F4EFFC74&displaylang=en'>https://www.microsoft.com/downloads/en/confirmation.aspx?FamilyId=585D2BDE-367F-495E-94E7-6349F4EFFC74&displaylang=en

 

Right click on the Tool, select “Run as Administrator” the tool will expand to the options Window

In the "Scan Type" window, select Quick Scan

Perform a scan and  Click Finish when the scan is done.

Retrieve the MSRT log as follows, and post it in your next reply:

 

1) Select the Windows key and R key together to open the "Run" function

2) Type or Copy/Paste the following command to the "Run Line" and Press Enter:

 

notepad c:\windows\debug\mrt.log

 

Let me see those logs, also give an update on any remaining issues or concerns...

 

Kevin...

 

 

 

 

Fixlist.txt

Link to post
Share on other sites

You`ve posted the wrong log from Malwarebytes...

 

Open Malwarebytes from the main GUI click on History > Application Logs. Find your scan log, the date when run will identify it. Checkmark "select" box > then hit the "view" button. The history log window will open. At the bottom of that window are two options, "Copy to clipboard" and "Export"

Select > "Copy to clipboard" that copies the full log to the windows clipboard, so at your reply you right click into the text field and select "Paste" the log is pasted (copied) to  your reply.

 

Or select "Export" you are given the option to export as a Text file (*.txt) or XML file (*.xml) Choose text file, save the exported file to a place of your choice. That file can be attached to your reply...

 

Next,

 

Please download RogueKiller and save it to your desktop from the following link: http://www.bleepingcomputer.com/download/roguekiller/

 


Quit all running programs.
For Windows XP, double-click to start.
For Vista,Windows 7/8, Right-click on the program and select Run as Administrator to start and when prompted allow it to run.
Read and accept the EULA (End User Licene Agreement)
Click Scan to scan the system.
When the scan completes select "Report", log will open. Close the program > Don't Fix anything!
Post back the report which should also be located here:

 

C:\Programdata\RogueKiller\Logs <-------- W7/8

C:\Documents and Settings\All Users\Application Data\RogueKiller\Logs <------XP

 

Next,

 

Download Security Check by screen317 from either of the following:

http://screen317.spywareinfoforum.org/SecurityCheck.exe or http://screen317.changelog.fr/SecurityCheck.exe

Save it to your Desktop. (If your security alerts either accept the alert, or turn the security off while Secuirity Check runs)
Double click SecurityCheck.exe (Vista or Windows 7/8 users right click and select "Run as Administrator") and follow the onscreen instructions inside of the black box. Press any key when asked.
A Notepad document should open automatically called checkup.txt; please post the contents of that document.

If Security Check will not run or you get an alert saying it is not supported, Re-boot your PC then try again...

Let me see those logs, also give an update on any remaining issues or concerns...

 

Kevin..

Link to post
Share on other sites

Here is the proper scan log.

Popups are completely gone. Opening Chrome Browser still gets me an extra window of http://vosteran.com/.

 

 

SecurityCheck's results pasted below: 

 

 Results of screen317's Security Check version 0.99.93 
 Windows 7 Service Pack 1 x64 (UAC is enabled) 
 Internet Explorer 11 
``````````````Antivirus/Firewall Check:``````````````
 Windows Firewall Enabled! 
avast! Antivirus  
 Antivirus up to date!  
`````````Anti-malware/Other Utilities Check:`````````
 Java 8 Update 25 
 Java version 32-bit out of Date!
 Adobe Flash Player 16.0.0.235 
 Adobe Reader XI 
 Google Chrome (39.0.2171.71)
 Google Chrome (39.0.2171.95)
````````Process Check: objlist.exe by Laurent```````` 
 Malwarebytes Anti-Malware mbamservice.exe 
 Malwarebytes Anti-Malware mbam.exe 
 Malwarebytes Anti-Malware mbamscheduler.exe  
 AVAST Software Avast AvastSvc.exe 
 AVAST Software Avast ng vbox\AvastVBoxSVC.exe
 AVAST Software Avast ng ngservice.exe
 AVAST Software Avast avastui.exe 
`````````````````System Health check`````````````````
 Total Fragmentation on Drive C: 2%
````````````````````End of Log``````````````````````

mal scan log.txt

RKreport_SCN_12252014_132307.log

Link to post
Share on other sites

Thanks for the logs, run the following please:

 

Double-click RogueKiller.exe to run again. (Vista/7/8 right-click and select Run as Administrator)

When the pre-scan completes  press the Scan button, this may take a few minutes to complete.

When the scan completes open the Files/Folders tab and locate the following detection:


[ZeroAccess][Folder] Install -- C:\Users\The Duke\AppData\Local\Google\Desktop\Install -> Found


Make sure that entry are Checkmarked (ticked) also ensure that all other entries are not Checkmarked.

Hit the Delete button, when complete select "Report" post that log...
 

Next,

 

Go here: https://support.google.com/chrome/answer/3296214?hl=en follow those instructions and reset Chrome browser settings....

 

Next,

 

Your Java javaicon.gif is out of date. Older versions have vulnerabilities that malware can use to infect your system.

Please follow these steps to remove older version of Java components and upgrade the application.

 

Upgrading Java:

 

Go to http://java.com/en/ and click on "Do I have Java"

It will check your current version and then offer to update to the latest version

Watch for and make sure you untick the box next to whatever free program they prompt you to install during the installation, unless you want it.

 

***Note: Check in Programs and Features (or Add/Remove Programs if you are an XP user) to make certain there are no old versions of Java still installed, if so - remove them. <<-- Very Important

 

Post the log from RogueKiller, also let me know if any remaining issues or concerns...

 

Thanks,

 

Kevin

Link to post
Share on other sites

Excellent, run the following to clean up..

 

Download "Delfix by Xplode" and save it to your desktop.

 

Or use the following if first link is down:

 

"Delfix link mirror"

 

Double Click to start the program. If you are using Vista or higher, please right-click and choose run as administrator

 

Make Sure the following items are checked:

 

 


    Activate UAC
    Remove disinfection tools
     Create registry backup
    Purge System Restore
    Reset system settings

 

Now click on "Run" and wait patiently until the tool has completed.

 

The tool will create a log when it has completed. We don't need you to post this.

 

Part of the routine will be to create a registry back up with ERUNT,  the back up will be created here:

 

C:\Windows\ERUNT

 

When all is known to be well with your system you can delete that back up folder if you consider it as not needed...

 

Any remnant files/logs from tools we have used can be deleted…

 

Next,

 

Read the following link to fully understand PC security and best practices, you may find it useful....

 

http://www.bleepingcomputer.com/forums/t/407147/answers-to-common-security-questions-best-practices/#entry2316629

 

Let me know if we are ok to close out...

 

Thanks,

 

Kevin....

Link to post
Share on other sites

  • Root Admin

Glad we could help. :)

If you need this topic reopened, please send a Private Message to any one of the moderating team members. Please include a link to this thread with your request. This applies only to the originator of this thread.

Other members who need assistance please start your own topic in a new thread. Thanks!

Link to post
Share on other sites

Guest
This topic is now closed to further replies.
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
Back to top
×
×
  • Create New...

Important Information

This site uses cookies - We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.