Jump to content

Recommended Posts

Hi. Desparately need help - I thought this would be a case of run the virus checker and we'd

PC started running noticable lower a few days ago and is now almost unusable. Few error messages and warning signs creeping in :-

"Loadlibarary "C\\documents & Settings\All Users\Apllication Data\VanjEhehu.dat failed - specified module canot be found" message when PC (eventally !) boots up.

Google home page now reporting "suspicious Activity - account temporarily locked" and asking for credit card data !

AVG2015 fails to run, stating software cannot run due to a 'Restriction Policy on the PC'

Malwarebytes runs, reports many many incidents which default to 'ignore once' then reappear next time it's run.

The whole thing is painfully slow. Even the keyboard !

Please help. I've downloaded and run 'Farbar' as advised in the forum. Output logs attached to this message.....

Link to post
Share on other sites

Welcome to the forum. (Do what you can)

General P2P/Piracy Warning:

 

1. If you're using Peer 2 Peer software such uTorrent, BitTorrent or similar you must either fully uninstall it or completely disable it from running while being assisted here.

2. If you have illegal/cracked software (MS Office, Adobe Products), cracks, keygens, custom (Adobe) host file, etc. on the system, please remove or uninstall them now and read the policy on Piracy.

Failure to remove such software will result in your topic being closed and no further assistance being provided.

 

<====><====><====><====><====><====><====><====>

 

1. Please run a Threat Scan with Malwarebytes (if possible)

Start Malwarebytes 2.0.........

Click on Settings > Detection and Protection > Non-Malware Protection > PUP (Potentially Unwanted Program) detections > Make sure it's set to Treat detections as malware

Same for PUM (Potentially Unwanted Modifications)

Quarantine all that's found

Post the log (save the log as a .txt file not .xml)

Then......

2. Please download Farbar Recovery Scan Tool (FRST) and save it to a folder.

(use correct version for your system.....Which system am I using?)

FRST <----for 32 bit systems

FRST64 <----for 64 bit systems

  • Double-click to run it. When the tool opens click Yes to disclaimer.
  • Press Scan button. (make sure the Addition box is checked)
  • It will make a log (FRST.txt) in the same directory the tool is run. Please copy and paste it to your reply.
  • The first time the tool is run, it makes also another log (Addition.txt). Please attach it to your reply.
If the logs are large, you can attach them:

To attach a log:

Bottom right corner of this page.

reply1.jpg

New window that comes up.

replyer1.jpg

Last................

3. Please download and run RogueKiller 32 bit to your desktop.

RogueKiller<---use this one for 64 bit systems

Which system am I using?

Quit all running programs.

For Windows XP, double-click to start.

For Vista or Windows 7-8, do a right-click on the program, select Run as Administrator to start, & when prompted Allow to run.

Wait for the Prescan to finish

Click Scan to scan the system.

When the scan completes > Don't Fix anything! > Click on the Report Button > Copy and paste the Report back here.

Don't run any other options, they're not all bad!!!!!!!

RogueKiller logs will also be located here:

%programdata%/RogueKiller/Logs <-------W7

C:\Documents and Settings\All Users\Application Data\RogueKiller\Logs <-------XP

(please don't put logs in code or quotes and use the default font)

MrC

Note:

Please read all of my instructions completely including these.

Make sure system restore is turned on and running. Create a new restore point

Make sure you're subscribed to this topic: Click on the Follow This Topic Button (at the top right of this page), make sure that the Receive notification box is checked and that it is set to Instantly

Removing malware can be unpredictable...unlikely but things can go very wrong! Backup any files that cannot be replaced. You can copy them to a CD/DVD, external drive or a pen drive

<+>Please don't run any other scans, download, install or uninstall any programs while I'm working with you.

<+>The removal of malware isn't instantaneous, please be patient.

<+>When we are done, I'll give to instructions on how to cleanup all the tools and logs

<+>Please stick with me until I give you the "all clear".

------->Your topic will be closed if you haven't replied within 3 days!<--------

If I don't respond within 24 hours, please send me a PM

Link to post
Share on other sites

Hi MrCharlie.   Thank you so much for helping me on this journey.

 

Ok. so I've done as you asked (in that order despite the order I've attached the output files here....)and attached all the log files below.  I'm leaving the machine running in between posts - I trust that's the thing to do ?

 

 

Look forward to your response....

 

 

 

Addition.txt

FRST.txt

mbam 28-10-14.txt

RKreport_SCN_10282014_201244.log

Link to post
Share on other sites

Make sure you have created a restore point and.....

bwebb7v.jpgDownload Delfix from Here and save it to your desktop.

  • Place a check mark in front of .......
  • Create registry backup <---only!
  • Uncheck the rest!
  • Click the Run button.

    Close the tool out when it's done....we'll use it later.

    ===================================

    Download the attached fixlist.txt to the same folder as FRST.exe/FRST64.exe.

    Run FRST.exe/FRST64.exe and click Fix only once and wait

    The tool will create a log (Fixlog.txt) in the folder, please post it to your reply.

    ===================================

    Make sure you have created that system restore point before you continue!

    Please read the directions carefully so you don't end up deleting something that is good!!

    If in doubt about an entry....please ask or choose Skip!!!!

    Don't Delete anything unless instructed to!

    If you get the warning about a file UnsignedFile.Multi.Generic or LockedFile.Multi.Generic please choose

    Skip and click on Continue

    If a suspicious object is detected, the default action will be Skip, click on Continue

    Please note that TDSSKiller can be run in safe mode if needed.

    Please download the latest version of TDSSKiller from HERE and save it to your Desktop.

    • Doubleclick on TDSSKiller.exe to run the application, then click on Change parameters. (Leave the KSN box checked)

      tds2.jpg

    • Put a checkmark beside loaded modules.

      13040712472913819.png

    • A reboot will be needed to apply the changes. Do it.
    • TDSSKiller will launch automatically after the reboot. Also your computer may seem very slow and unusable. This is normal. Give it enough time to load your background programs.
    • Then click on Change parameters in TDSSKiller.
    • Check all boxes then click OK.

      clip.jpg

    • Click the Start Scan button.

      tds2.jpg

    • The scan should take no longer than 2 minutes.
    • If a suspicious object is detected, the default action will be Skip, click on Continue.

      tdsskiller_guide_5.gif

      Any entries like this: \Device\Harddisk0\DR0 ( TDSS File System ) - please choose Skip.

      If in doubt about an entry....please ask or choose Skip

    • If malicious objects are found, they will show in the Scan results - Select action for found objects and offer three options.

      Ensure Cure (default) is selected, then click Continue > Reboot now to finish the cleaning process.

      tdsskiller_guide_3.gif

      Note: If Cure is not available, please choose Skip instead, do not choose Delete unless instructed.

    • A report will be created in your root directory, (usually C:\ folder) in the form of "TDSSKiller.[Version]_[Date]_[Time]_log.txt". Please copy and paste the contents of that file here. There may be 3 logs > so post or attach all of them.
    • Sometimes these logs can be very large, in that case please attach it or zip it up and attach it.

    Here's a summary of what to do if you would like to print it out:

    If in doubt about an entry....please ask or choose Skip

    Don't Delete anything unless instructed to!

    If a suspicious object is detected, the default action will be Skip, click on Continue

    If you get the warning about a file UnsignedFile.Multi.Generic or LockedFile.Multi.Generic please choose

    Skip and click on Continue

    Any entries like this: \Device\Harddisk0\DR0 ( TDSS File System ) - please choose Skip.

    If malicious objects are found, they will show in the Scan results and offer three (3) options.

    Ensure Cure is selected, then click Continue => Reboot now to finish the cleaning process.

    Note: If Cure is not available, please choose Skip instead, do not choose Delete unless instructed.

    ~~~~~~~~~~~~~~~~~~~~

    You can attach the logs if they're too long:

    Bottom right corner of this page.

    reply1.jpg

    New window that comes up.

    replyer1.jpg

    Then...........

    Please download and run ComboFix.

    The most important things to remember when running it is to disable all your malware programs and run Combofix from your desktop.

    Please visit this webpage for download links, and instructions for running ComboFix

    http://www.bleepingcomputer.com/combofix/how-to-use-combofix

    http://www.bleepingcomputer.com/download/combofix/dl/12/ <---ComboFix direct download

    Please make sure you click download buttons that look similar to this, not "sponsored ad links":

    bleep-crop.jpg

    Ensure you have disabled all anti virus and anti malware programs so they do not interfere with the running of ComboFix.

    Information on disabling your malware programs can be found Here.

    Make sure you run ComboFix from your desktop.

    Give it at least 30-45 minutes to finish if needed.

    Please include the C:\ComboFix.txt in your next reply for further review.

    ---------->NOTE<----------

    If you get the message Illegal operation attempted on registry key that has been marked for deletion after you run ComboFix....please reboot the computer, this should resolve the problem. You may have to do this several times if needed.

    MrC

Link to post
Share on other sites

My PC locked up at the 2nd stage, 

 

Download the attached fixlist.txt to the same folder as FRST.exe/FRST64.exe.
Run FRST.exe/FRST64.exe and click Fix only once and wait
The tool will create a log (Fixlog.txt) in the folder, please post it to your reply.

 

I've attached the log file it created - do I run again or dow we have to step back again ?

Fixlog.txt

Link to post
Share on other sites

Mr C....I hop emy last post made sense ?   I ran the FRST.exe as instructed but the PC crashed. When I rebooted it had created the log file I attached but I suspect it hadn't  finished. I didn't run it again as you'd said to hit the 'fix' button only once ?    I'm waiting on your instruction - do I run it again or do we now have to perform some other action before I move on ?

 

Cheers....

Link to post
Share on other sites

Ok MrC....

 

 

The Combofix program didn't completely close after maybe two hours, but it had stopped writing to the log file. I closed it manually and have attached the log file here for your review.

 

 

Also attachedare the TDSS Killer and Fixlog.txt output files....

 

 

Look forward to the next step....

 

Cheers, Ric.

 

TDSSKiller.3.0.0.41_29.10.2014_18.51.58_log.txt

Fixlog.txt

ComboFix.txt

Link to post
Share on other sites

Next:

Please download AdwCleaner from HERE or HERE to your desktop.

  • Double click on AdwCleaner.exe to run the tool.

    Vista/Windows 7/8 users right-click and select Run As Administrator

  • Click on the Scan button.
  • AdwCleaner will begin...be patient as the scan may take some time to complete.
  • When it's done you'll see: Pending: Please uncheck elements you don't want removed.
  • Now click on the Report button...a logfile (AdwCleaner[R0].txt) will open in Notepad for review.
  • Look over the log especially under Files/Folders for any program you want to save.
  • If there's a program you may want to save, just uncheck it from AdwCleaner.
  • If you're not sure, post the log for review. (all items found are either adware/spyware/foistware)
  • If you're ready to clean it all up.....click the Clean button.
  • After rebooting, a logfile report (AdwCleaner[s0].txt) will open automatically.
  • Copy and paste the contents of that logfile in your next reply.
  • A copy of that logfile will also be saved in the C:\AdwCleaner folder.
  • Items that are deleted are moved to the Quarantine Folder: C:\AdwCleaner\Quarantine
  • To restore an item that has been deleted:
  • Go to Tools > Quarantine Manager > check what you want restored > now click on Restore.
Next..................

thisisujrt.gif Please download Junkware Removal Tool to your desktop.

  • Shut down your protection software now to avoid potential conflicts.
  • Run the tool by double-clicking it. If you are using Windows Vista or Seven, right-mouse click it and select Run as Administrator.
  • The tool will open and start scanning your system.
  • Please be patient as this can take a while to complete depending on your system's specifications.
  • On completion, a log (JRT.txt) is saved to your desktop and will automatically open.
  • Post the contents of JRT.txt into your next message.
Next.........

Please run a Threat Scan (Malwarebytes)

Click on settings > Detection and Protection > Non-Malware Protection > PUP (Potentially Unwanted Program) detections > Make sure it's set to Treat detections as malware

Same for PUM (Potentially Unwanted Modifications)

Quarantine All that's found

MrC

Link to post
Share on other sites

  • 3 weeks later...

Due to the lack of feedback this topic is closed to prevent others from posting here. If you need this topic reopened, please send a Private Message to any one of the moderating team members. Please include a link to this thread with your request. This applies only to the originator of this thread.

Other members who need assistance please start your own topic in a new thread. Thanks!

Link to post
Share on other sites

Guest
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
Back to top
×
×
  • Create New...

Important Information

This site uses cookies - We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.