Jump to content

Recommended Posts

My system is crashing, Malwarebytes is stopping numerous outbound websites.  Removed about 2 gig of stuff this virus loaded into my temp files, tried numerous other things to remove it with no luck.  Help please.  Norton 360 told me Ive got a powelik virus as well as some adclick virus or something like that.

Link to post
Share on other sites

Hello and post-32477-1261866970.gif

 

P2P/Piracy Warning:

 

If you're using Peer 2 Peer software such as uTorrent, BitTorrent or similar you must either fully uninstall them or completely disable them from running while being assisted here.Failure to remove or disable such software will result in your topic being closed and no further assistance being provided.If you have illegal/cracked software, cracks, keygens etc. on the system, please remove or uninstall them now and read the policy on Piracy.

 

Next,

 

Download Farbar Recovery Scan Tool and save it to your desktop.

 

Note: You need to run the version compatible with your system (32 bit or 64 bit). If you are not sure which version applies to your system download both of them and try to run them. Only one of them will run on your system, that will be the right version.


Double-click to run it. When the tool opens click Yes to disclaimer.
Press Scan button.
It will make a log (FRST.txt) in the same directory the tool is run. Please copy and paste it to your reply.
The first time the tool is run, it makes also another log (Addition.txt). Please attach it to your reply.

 

Kevin..

Link to post
Share on other sites

Download attached fixlist.txt file (end of reply) and save it to the Desktop, or the folder you saved FRST into.

NOTE. It's important that both FRST and fixlist.txt are in the same location or the fix will not work.

 

Run FRST and press the Fix button just once and wait.

The tool will make a log on the Desktop (Fixlog.txt) or the folder it was ran from. Please post it to your reply.

 

Next,

 

Open Malwarebytes Anti-Malware, from the Dashboard please Check for Updates by clicking the Update Now... link

When the update completes select > Settings > Detection and Protection > Enable Scan for rootkit and Under Non Malware Protection set both PUP and PUM to Treat detections as malware.

 

 

Click on the SCAN button and run a Threat Scan with Malwarebytes Anti-Malware by clicking the Scan Now>> button.

 

When the scan is complete, if there have been detections, click Apply Actions to allow MBAM to clean what was detected.

 

 

In most cases, a restart will be required.

 

 

Wait for the prompt to restart the computer to appear, then click on Yes.

 

 

Once completed please click on the History > Application Logs and find your scan log and open it and then click on the "copy to clipboard" button and post back the results on your next reply.

 

Next,

 

Download AdwCleaner by Xplode onto your Desktop.


Double click on Adwcleaner.exe to run the tool.
Click on Scan
Once the scan is done, click on the Clean button.
You will get a prompt asking to close all programs. Click OK.
Click OK again to reboot your computer.
A text file will open after the restart. Please post the content of that logfile in your reply.
You can also find the logfile at C:\AdwCleaner[sn].txt. Where n in the scan reference number

 

Next,

 

thisisujrt.gif Please download Junkware Removal Tool to your desktop.


Shut down your protection software now to avoid potential conflicts. (re-enable when done)
Run the tool by double-clicking it. If you are using Windows Vista, 7, or 8; instead of double-clicking, right-mouse click JRT.exe and select "Run as Administrator".
The tool will open and start scanning your system.
Please be patient as this can take a while to complete depending on your system's specifications.
On completion, a log (JRT.txt) is saved to your desktop and will automatically open.
Post the contents of JRT.txt into your next message.

 

Next,

 

Download Microsoft's " Malicious Software Removal Tool" and save direct to the desktop

Ensure to get the correct version for your system....

32 Bit version:

https://www.microsoft.com/downloads/en/confirmation.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

64 Bit version:

https://www.microsoft.com/downloads/en/confirmation.aspx?FamilyId=585D2BDE-367F-495E-94E7-6349F4EFFC74&displaylang=en'>https://www.microsoft.com/downloads/en/confirmation.aspx?FamilyId=585D2BDE-367F-495E-94E7-6349F4EFFC74&displaylang=en

 

Right click on the Tool, select “Run as Administrator” the tool will expand to the options Window

In the "Scan Type" window, select Quick Scan

Perform a scan and  Click Finish when the scan is done.

Retrieve the MSRT log as follows, and post it in your next reply:

 

1) Select the Windows key and R key together to open the "Run" function

2) Type or Copy/Paste the following command to the "Run Line" and Press Enter:

 

notepad c:\windows\debug\mrt.log

 

Let me see those logs, also give an update on any remaining issues or concerns...

 

Kevin.....

 

 

 

 

 

 

Fixlist.txt

Link to post
Share on other sites

  • Root Admin

Due to the lack of feedback this topic is closed to prevent others from posting here. If you need this topic reopened, please send a Private Message to any one of the moderating team members. Please include a link to this thread with your request. This applies only to the originator of this thread.

Other members who need assistance please start your own topic in a new thread. Thanks!

Link to post
Share on other sites

Guest
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
Back to top
×
×
  • Create New...

Important Information

This site uses cookies - We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.