Jump to content

dllhost.exe *32 COM Surrogate repeated in task processes

techrahul

By techrahul
in Resolved Malware Removal Logs

 Share

Recommended Posts

techrahul

techrahul

Posted
Posted

I am having issues with multiple "dllhost.exe *32" COM Surrogate process running and these processes keep coming back even after manually stop them. I followed the instruction of previous topic post by some other member & I ran Farbar Recovery Scan, Malwarebyte Threat Scan and now ESET Online Scanner is  scanning now & 18 infected files are detect yet, i will let you the complete details of scan once it completed .......I have a question, I download Fixlist file from previous topic and run the fix of Farbar Recovery Scan.....I dont know that i done correct or wrong 


 


I also completed the scan with MBAM and it detects some objects, i removed all detected object and resttart my computer but unfortunately i forgot to save MBAM log file. I remove MBAM after threat removal because my computer was working slow with MBAM so i removed it.......Sorry if i done wrong


 


I attached  FRST,   Addition.txt,   Fixlist I use and Fixlog Files with this topic


FRST.txt

Addition.txt

fixlist.txt

Fixlog.txt

Link to post
Share on other sites
kevinf80

kevinf80

Posted
Posted

Hello and post-32477-1261866970.gif

 

P2P/Piracy Warning:

 

If you're using Peer 2 Peer software such as uTorrent, BitTorrent or similar you must either fully uninstall them or completely disable them from running while being assisted here.Failure to remove or disable such software will result in your topic being closed and no further assistance being provided.If you have illegal/cracked software, cracks, keygens etc. on the system, please remove or uninstall them now and read the policy on Piracy.

 

Run FRST one more time, ensure all boxes are checkmarked under "Whitelist" and "Addition.txt" is checkmarked under "Optional scan"

 

Post the two new logs....

 

Kevin..

Link to post
Share on other sites
techrahul

techrahul

Posted
  • Author
Posted

Hello Kevin, That ESET scan is completed & found 22 infected files but its not giving me log file, may be i done something wrong. I select check box 1) Uninstall Application 2) Remove Quarantine files and wait for log file but not getting any log files so I finish the scan and close the windows.........Now FRST scan is running once its completed i will give you fresh FRST.txt and Addition.txt

Link to post
Share on other sites
kevinf80

kevinf80

Posted
Posted

No we will just continue without for now....

 

Download attached fixlist.txt file (end of reply) and save it to the Desktop, or the folder you saved FRST into.

NOTE. It's important that both FRST and fixlist.txt are in the same location or the fix will not work.

 

Run FRST and press the Fix button just once and wait.

The tool will make a log on the Desktop (Fixlog.txt) or the folder it was ran from. Please post it to your reply.

 

Next,

 

Download Malwarebytes Anti-Malware to your desktop.


Double-click mbam-setup and follow the prompts to install the program.
At the end, be sure a checkmark is placed next to the following:
Launch Malwarebytes Anti-Malware
A 14 day trial of the Premium features is pre-selected. You may deselect this if you wish, and it will not diminish the scanning and removal capabilities of the program.
Click Finish.
On the Dashboard, click the 'Update Now >>' link
After the update completes Select > Settings > Detection and Protection > Enable Scan for rootkit and Under Non Malware Protection set both PUP and PUM to Treat detections as malware.
Now select > Scan > Threat scan > Scan now
When the scan is complete, if there have been detections, click Apply Actions to allow MBAM to clean what was detected.
In most cases, a restart will be required.
Wait for the prompt to restart the computer to appear, then click on Yes.

 


After the restart once you are back at your desktop, open MBAM once more.
Click on the History tab > Application Logs.
Double click on the scan log which shows the Date and time of the scan just performed.
Click 'Copy to Clipboard'
Paste the contents of the clipboard into your reply.

 

Next,

 

Download AdwCleaner by Xplode onto your Desktop.


Double click on Adwcleaner.exe to run the tool.
Click on Scan
Once the scan is done, click on the Clean button.
You will get a prompt asking to close all programs. Click OK.
Click OK again to reboot your computer.
A text file will open after the restart. Please post the content of that logfile in your reply.
You can also find the logfile at C:\AdwCleaner[sn].txt. Where n in the scan reference number

 

Next,

 

thisisujrt.gif Please download Junkware Removal Tool to your desktop.


Shut down your protection software now to avoid potential conflicts. (re-enable when done)
Run the tool by double-clicking it. If you are using Windows Vista, 7, or 8; instead of double-clicking, right-mouse click JRT.exe and select "Run as Administrator".
The tool will open and start scanning your system.
Please be patient as this can take a while to complete depending on your system's specifications.
On completion, a log (JRT.txt) is saved to your desktop and will automatically open.
Post the contents of JRT.txt into your next message.

 

Next,

 

Download Microsoft's " Malicious Software Removal Tool" and save direct to the desktop

Ensure to get the correct version for your system....

32 Bit version:

https://www.microsoft.com/downloads/en/confirmation.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

64 Bit version:

https://www.microsoft.com/downloads/en/confirmation.aspx?FamilyId=585D2BDE-367F-495E-94E7-6349F4EFFC74&displaylang=en'>https://www.microsoft.com/downloads/en/confirmation.aspx?FamilyId=585D2BDE-367F-495E-94E7-6349F4EFFC74&displaylang=en

 

Right click on the Tool, select “Run as Administrator” the tool will expand to the options Window

In the "Scan Type" window, select Full Scan

Perform a scan and  Click Finish when the scan is done.

Retrieve the MSRT log as follows, and post it in your next reply:

 

1) Select the Windows key and R key together to open the "Run" function

2) Type or Copy/Paste the following command to the "Run Line" and Press Enter

notepad c:\windows\debug\mrt.log

 

Post those logs, also give an update on any remaining issues or concerns....

 

Kevin..

 

 

 

 

Fixlist.txt

Link to post
Share on other sites
  • Root Admin
AdvancedSetup

AdvancedSetup

Posted
  • Root Admin
Posted

Due to the lack of feedback this topic is closed to prevent others from posting here. If you need this topic reopened, please send a Private Message to any one of the moderating team members. Please include a link to this thread with your request. This applies only to the originator of this thread.

Other members who need assistance please start your own topic in a new thread. Thanks!

Link to post
Share on other sites
Guest
This topic is now closed to further replies.
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.
Back to top
×
×
  • Create New...

Important Information

This site uses cookies - We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.