Jump to content

User Profile Inaccessible and Malware Bytes Can't Run


Recommended Posts

Hi, so I'm infected with malware that's kind of hard to get rid of. I'm running Windows 7.  When I don't start in safe mode, it won't let me enter my user profile, I get SEVERAL events in my event viewer, and I can't start the internet. MalwareBytes also is stopped in the prescan phase. The only thing that changes when I go into safe mode with networking is I can at least use the internet. I've run farbar and have attached the FRST and Addition text files. Some additional information:

 

I ran in safe mode and tried to remove the virus or malware with other antimalware that was recommended in another thread that I can no longer find unfortunately. I also have Ubuntu on an unpartititioned part of my HDD, so was able to run MalwareBytes from that using WINE. It removed a few things, but didn't solve the problem. In my Windows OS environment, I still can't access my user profile, I get sent to a default profile, and MalwareBytes is still prevented from running.

 

Any help would be greatly appreciated. Thank you.

 

Addition.txt

FRST_08-06-2014_20-43-01.txt

Link to post
Share on other sites

  • Root Admin

Hello and :welcome:

Please read the following and post back the logs when ready and we'll see about getting you cleaned up.

General P2P/Piracy Warning:
 
 

 
If you're using
Peer 2 Peer
software such as
uTorrent, BitTorrent
or similar you must either fully uninstall them or completely disable them from running while being assisted here.

Failure to remove or disable such software will result in your topic being closed and no further assistance being provided.

If you have
illegal/cracked software, cracks, keygens etc
. on the system, please remove or uninstall them now and read the policy on
Piracy
.



 
Before we proceed further, please read all of the following instructions carefully.
If there is anything that you do not understand kindly ask before proceeding.
If needed please print out these instructions.
  • Please do not post logs using CODE, QUOTE, or FONT tags. Just paste them as direct text.
  • If the log is too large then you can use attachments by clicking on the More Reply Options button.
  • Please enable your system to show hidden files: How to see hidden files in Windows
  • Make sure you're subscribed to this topic:
    • Click on the Follow This Topic Button (at the top right of this page), make sure that the Receive notification box is checked and that it is set to Instantly

    [*]Removing malware can be unpredictable...It is unlikely but things can go very wrong! Please make sure you Backup all files that cannot be replaced if something were to happen. You can copy them to a CD/DVD, external drive or a pen drive [*]Please don't run any other scans, download, install or uninstall any programs unless requested by me while I'm working with you. [*]The removal of malware is not instantaneous, please be patient. Often we are also on a different Time Zone. [*]Perform everything in the correct order. Sometimes one step requires the previous one. [*]If you have any problems while following my instructions, Stop there and tell me the exact nature of the issue. [*]You can check here if you're not sure if your computer is 32-bit or 64-bit [*]Please disable your antivirus while running any requested scanners so that they do not interfere with the scanners. [*]When we are done, I'll give you instructions on how to cleanup all the tools and logs [*]Please stick with me until I give you the "all clear" and Please don't waste my time by leaving before that. [*]Your topic will be closed if you haven't replied within 3 days [*](If I have not responded within 24 hours, please send me a Private Message as a reminder)


 
STEP 0
RKill is a program that was developed at BleepingComputer.com that attempts to terminate known malware processes
so that your normal security software can then run and clean your computer of infections.
When RKill runs it will kill malware processes and then removes incorrect executable associations and fixes policies
that stop us from using certain tools. When finished it will display a log file that shows the processes that were
terminated while the program was running.

As RKill only terminates a program's running process, and does not delete any files, after running it you should not reboot
your computer as any malware processes that are configured to start automatically will just be started again.
Instead, after running RKill you should immediately scan your computer using the requested scans I've included.

Please download Rkill by Grinler from one of the links below and save it to your desktop.
 


Link 2

  • On Windows XP double-click on the Rkill desktop icon to run the tool.
  • On Windows Vista/Windows 7 or 8, right-click on the Rkill desktop icon and select Run As Administrator
  • A black DOS box will briefly flash and then disappear. This is normal and indicates the tool ran successfully.
  • If not, delete the file, then download and use the one provided in Link 2.
  • If it does not work, repeat the process and attempt to use one of the remaining links until the tool runs.
  • If the tool does not run from any of the links provided, please let me know.
  • Do not reboot the computer, you will need to run the application again.

STEP 01
Backup the Registry:
Modifying the Registry can create unforeseen problems, so it always wise to create a backup before doing so.
  • Please download ERUNT from one of the following links: Link1 | Link2 | Link3
  • ERUNT (Emergency Recovery Utility NT) is a free program that allows you to keep a complete backup of your registry and restore it when needed.
  • Double click on erunt-setup.exe to Install ERUNT by following the prompts.
  • NOTE: Do not choose to allow ERUNT to add an Entry to the Startup folder. Click NO.
  • Start ERUNT either by double clicking on the desktop icon or choosing to start the program at the end of the setup process.
  • Choose a location for the backup.
    • Note: the default location is C:\Windows\ERDNT which is acceptable.

    [*]Make sure that at least the first two check boxes are selected. [*]Click on OK [*]Then click on YES to create the folder. [*]Note: if it is necessary to restore the registry, open the backup folder and start ERDNT.exe


STEP 02
Please run a Threat Scan with MBAM.  If you're unable to run or complete the scan as shown below please see the following:  MBAM Clean Removal Process 2x
When reinstalling the program please try the latest version.

Right click and choose "Run as administrator" to open Malwarebytes Anti-Malware and from the Dashboard please Check for Updates by clicking the Update Now... link
Open up Malwarebytes > Settings > Detection and Protection > Enable Scan for rootkit and Under Non Malware Protection set both PUP and PUM to Treat detections as malware.
Click on the SCAN button and run a Threat Scan with Malwarebytes Anti-Malware by clicking the Scan Now>> button.
Once completed please click on the History > Application Logs and find your scan log and open it and then click on the "copy to clipboard" button and post back the results on your next reply.
 
 
STEP 03
Please download RogueKiller and save it to your desktop.

You can check here if you're not sure if your computer is 32-bit or 64-bit

  • RogueKiller 32-bit | RogueKiller 64-bit
  • Quit all running programs.
  • For Windows XP, double-click to start.
  • For Vista,Windows 7/8, Right-click on the program and select Run as Administrator to start and when prompted allow it to run.
  • Read and accept the EULA (End User Licene Agreement)
  • Click Scan to scan the system.
  • When the scan completes Close the program > Don't Fix anything!
  • Don't run any other options, they're not all bad!!
  • Post back the report which should be located on your desktop.


Thank you
 

Link to post
Share on other sites

I ran ERUNT. I'm still having a problem with MalwareBytes. I did the full clean uninstall, reinstalled the latest version, went to update it, and it crashed. I'm assuming this is because the virus is trying to protect itself, because MalwareBytes works fine when I run my Ubuntu guest OS. It just didn't solve my problem.

Link to post
Share on other sites

RogueKiller V9.0.2.0 (x64) [Jun  3 2014] by Adlice Software
mail : http://www.adlice.com/contact/
Feedback : http://forum.adlice.com
Website : http://www.adlice.com/softwares/roguekiller/
Blog : http://www.adlice.com

Operating System : Windows 7 (6.1.7601 Service Pack 1) 64 bits version
Started in : Normal mode
User : Entropic Turnips [Admin rights]
Mode : Scan -- Date : 06/12/2014  19:37:40

¤¤¤ Bad processes : 0 ¤¤¤

¤¤¤ Registry Entries : 19 ¤¤¤
[suspicious.Path] (X64) HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\gdrv -> FOUND
[suspicious.Path] (X64) HKEY_LOCAL_MACHINE\System\ControlSet001\Services\gdrv -> FOUND
[suspicious.Path] (X64) HKEY_LOCAL_MACHINE\System\ControlSet002\Services\gdrv -> FOUND
[PUM.Policies] (X64) HKEY_USERS\.DEFAULT\Software\Microsoft\Windows\CurrentVersion\Policies\System | DisableRegistryTools : 0  -> FOUND
[PUM.Policies] (X64) HKEY_USERS\.DEFAULT\Software\Microsoft\Windows\CurrentVersion\Policies\System | DisableTaskMgr : 0  -> FOUND
[PUM.Policies] (X86) HKEY_USERS\.DEFAULT\Software\Microsoft\Windows\CurrentVersion\Policies\System | DisableRegistryTools : 0  -> FOUND
[PUM.Policies] (X86) HKEY_USERS\.DEFAULT\Software\Microsoft\Windows\CurrentVersion\Policies\System | DisableTaskMgr : 0  -> FOUND
[PUM.Policies] (X64) HKEY_USERS\S-1-5-18\Software\Microsoft\Windows\CurrentVersion\Policies\System | DisableRegistryTools : 0  -> FOUND
[PUM.Policies] (X64) HKEY_USERS\S-1-5-18\Software\Microsoft\Windows\CurrentVersion\Policies\System | DisableTaskMgr : 0  -> FOUND
[PUM.Policies] (X86) HKEY_USERS\S-1-5-18\Software\Microsoft\Windows\CurrentVersion\Policies\System | DisableRegistryTools : 0  -> FOUND
[PUM.Policies] (X86) HKEY_USERS\S-1-5-18\Software\Microsoft\Windows\CurrentVersion\Policies\System | DisableTaskMgr : 0  -> FOUND
[PUM.Policies] (X64) HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\System | EnableLUA : 0  -> FOUND
[PUM.Policies] (X86) HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\System | EnableLUA : 0  -> FOUND
[PUM.Policies] (X64) HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\System | ConsentPromptBehaviorAdmin : 0  -> FOUND
[PUM.Policies] (X86) HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\System | ConsentPromptBehaviorAdmin : 0  -> FOUND
[PUM.DesktopIcons] (X64) HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Explorer\HideDesktopIcons\NewStartPanel | {20D04FE0-3AEA-1069-A2D8-08002B30309D} : 1  -> FOUND
[PUM.DesktopIcons] (X64) HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Explorer\HideDesktopIcons\NewStartPanel | {59031a47-3f72-44a7-89c5-5595fe6b30ee} : 1  -> FOUND
[PUM.DesktopIcons] (X86) HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Explorer\HideDesktopIcons\NewStartPanel | {20D04FE0-3AEA-1069-A2D8-08002B30309D} : 1  -> FOUND
[PUM.DesktopIcons] (X86) HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Explorer\HideDesktopIcons\NewStartPanel | {59031a47-3f72-44a7-89c5-5595fe6b30ee} : 1  -> FOUND

¤¤¤ Scheduled tasks : 0 ¤¤¤

¤¤¤ Files : 0 ¤¤¤

¤¤¤ HOSTS File : 0 ¤¤¤

¤¤¤ Antirootkit : 4 ¤¤¤
[EAT:Addr] (explorer.exe) WINMM.dll - DllCanUnloadNow : C:\Windows\system32\wpdshserviceobj.dll @ 0x7fefa313d60
[EAT:Addr] (explorer.exe) WINMM.dll - DllGetClassObject : C:\Windows\system32\wpdshserviceobj.dll @ 0x7fefa311a74
[EAT:Addr] (explorer.exe) WINMM.dll - DllRegisterServer : C:\Windows\system32\wpdshserviceobj.dll @ 0x7fefa316070
[EAT:Addr] (explorer.exe) WINMM.dll - DllUnregisterServer : C:\Windows\system32\wpdshserviceobj.dll @ 0x7fefa316278

¤¤¤ Web browsers : 0 ¤¤¤

¤¤¤ MBR Check : ¤¤¤
+++++ PhysicalDrive0: ST1000DM 003-9YN162 SCSI Disk Device +++++
--- User ---
[MBR] 90f883e1af6f37bb06acbc804d0e5039
[bSP] 28d73365e6a42aac0b113bb5c0657790 : Windows Vista/7/8 MBR Code
Partition table:
0 - [ACTIVE] NTFS (0x7) [VISIBLE] Offset (sectors): 2048 | Size: 100 MB
1 - [XXXXXX] NTFS (0x7) [VISIBLE] Offset (sectors): 206848 | Size: 953767 MB
User = LL1 ... OK
Error reading LL2 MBR! ([1] Incorrect function. )
 

Link to post
Share on other sites

  • Root Admin

Please visit this webpage and read the ComboFix User's Guide:

  • Once you've read the article and are ready to use the program you can download it directly from the link below.
  • Important! - Please make sure you save combofix to your desktop and do not run it from your browser
  • Direct download link for: ComboFix.exe
  • Please make sure you disable your security applications before running ComboFix.
  • Once Combofix has completed it will produce and open a log file.  Please be patient as it can take some time to load.
  • Please attach that log file to your next reply.
  • If needed the file can be located here:  C:\combofix.txt
  • NOTE: If you receive the message "illegal operation has been attempted on a registry key that has been marked for deletion", just reboot the computer.


 

Link to post
Share on other sites

  • 4 weeks later...
  • Root Admin

Please go into Control Panel, Add/Remove and uninstall ALL versions of Java and then run the following.
 
Please download JavaRa-1.16 and save it to your computer.

  • Double click to open the zip file and then select all and choose Copy.
  • Create a new folder on your Desktop named RemoveJava and paste the files into this new folder.
  • Quit all browsers and other running applications.
  • Right-click on JavaRa.exe in RemoveJava folder and choose Run as administrator to start the program.
  • From the drop-down menu, choose English and click on Select.
  • JavaRa will open; click on Remove Older Versions to remove the older versions of Java installed on your computer.
  • Click Yes when prompted. When JavaRa is done, a notice will appear that a logfile has been produced. Click OK.
  • A logfile will pop up. Please save it to a convenient location and post it in your next reply.

Next:
 
Please Run TFC by OldTimer to clear temporary files:
  • Download TFC from here and save it to your desktop.
  • http://oldtimer.geekstogo.com/TFC.exe
  • Close any open programs and Internet browsers.
  • Double click TFC.exe to run it on XP (for Vista and Windows 7 right click and choose "Run as administrator") and once it opens click on the Start button on the lower left of the program to allow it to begin cleaning.
  • Please be patient as clearing out temp files may take a while.
  • Once it completes you may be prompted to restart your computer, please do so.
  • Once it's finished you may delete TFC.exe from your desktop or save it for later use for the cleaning of temporary files.


 
 

Link to post
Share on other sites

Here's the JavaRa log. It said that the JavaRa.def file couldn't be found. I double checked that it was in the same file and tried to run it again, and it gave me the same error message. This is the log from the first time since the second time recorded the same exact information, just twice. Sorry for the wait, TFC had to run overnight.

JavaRa.log

Link to post
Share on other sites

  • Root Admin

Please go ahead and run through the following steps and post back the logs when ready.
 
STEP 04
Please download Junkware Removal Tool to your desktop.

  • Shutdown your antivirus to avoid any conflicts.
  • Right click over JRT.exe and select Run as administrator on Windows Vista or Windows 7, double-click on XP.
  • The tool will open and start scanning your system.
  • Please be patient as this can take a while to complete.
  • On completion, a log (JRT.txt) is saved to your desktop and will automatically open.
  • Post the contents of JRT.txt into your next reply message
  • When completed make sure to re-enable your antivirus


STEP 05
Lets clean out any adware now: (this will require a reboot so save all your work)

Please download AdwCleaner by Xplode and save to your Desktop.

  • Double click on AdwCleaner.exe to run the tool.
    Vista/Windows 7/8 users right-click and select Run As Administrator
  • Click on the Scan button.
  • AdwCleaner will begin...be patient as the scan may take some time to complete.
  • When it's done you'll see: Pending: Please uncheck elements you don't want removed.
  • Now click on the Report button...a logfile (AdwCleaner[R0].txt) will open in Notepad for review.
  • Look over the log especially under Files/Folders for any program you want to save.
  • If there's a program you may want to save, just uncheck it from AdwCleaner.
  • If you're not sure, post the log for review. (all items found are adware/spyware/foistware)
  • If you're ready to clean it all up.....click the Clean button.
  • After rebooting, a logfile report (AdwCleaner[s0].txt) will open automatically.
  • Copy and paste the contents of that logfile in your next reply.
  • A copy of that logfile will also be saved in the C:\AdwCleaner folder.
  • Items that are deleted are moved to the Quarantine Folder: C:\AdwCleaner\Quarantine
  • To restore an item that has been deleted:
  • Go to Tools > Quarantine Manager > check what you want restored > now click on Restore.


STEP 06
Please open Malwarebytes Anti-Malware and from the Dashboard please Check for Updates by clicking the Update Now... link
Open up Malwarebytes > Settings > Detection and Protection > Enable Scan for rootkits, Under Non Malware Protection set both PUP and PUM to Treat detections as malware.
Click on the SCAN button and run a Threat Scan with Malwarebytes Anti-Malware by clicking the Scan Now>> button. Remove any threats found
Once completed please click on the History > Application Logs and find your scan log and open it and then click on the "copy to clipboard" button and post back the results on your next reply.


STEP 07
button_eos.gif

Please go here to run the online antivirus scannner from ESET.

  • Turn off the real time scanner of any existing antivirus program while performing the online scan
  • Tick the box next to YES, I accept the Terms of Use.
  • Click Start
  • When asked, allow the activex control to install
  • Click Start
  • Make sure that the option Remove found threats is unticked
  • Click on Advanced Settings and ensure these options are ticked:
    • Scan for potentially unwanted applications
    • Scan for potentially unsafe applications
    • Enable Anti-Stealth Technology


    [*]Click Scan [*]Wait for the scan to finish [*]If any threats were found, click the 'List of found threats' , then click Export to text file.... [*]Save it to your desktop, then please copy and paste that log as a reply to this topic.


STEP 08
Please download the Farbar Recovery Scan Tool and save it to your desktop.

Note: You need to run the version compatibale with your system. You can check here if you're not sure if your computer is 32-bit or 64-bit

  • Double-click to run it. When the tool opens click Yes to disclaimer.
  • Press the Scan button.
  • It will make a log (FRST.txt) in the same directory the tool is run. Please copy and paste it to your reply.
  • The first time the tool is run, it also makes another log (Addition.txt). Please attach it to your reply as well.

Link to post
Share on other sites

Hi, I'm currently running ESET and will follow that up with farbar. I've attached the JRT.txt and AdwareCleaner.txt files and will attach the other log files when they're finished. I have not attached the malwarebytes log because it once again crashed upon trying to update or perform a scan. I disabled AVG for the scan and it still was unable to complete an update or scan without crashing.

AdwCleanerS1.txt

JRT.txt

Link to post
Share on other sites

  • Root Admin

Please go into Control Panel, Add/Remove and uninstall ALL versions of Java and then run the following.
 
Please download JavaRa-1.16 and save it to your computer.

  • Double click to open the zip file and then select all and choose Copy.
  • Create a new folder on your Desktop named RemoveJava and paste the files into this new folder.
  • Quit all browsers and other running applications.
  • Right-click on JavaRa.exe in RemoveJava folder and choose Run as administrator to start the program.
  • From the drop-down menu, choose English and click on Select.
  • JavaRa will open; click on Remove Older Versions to remove the older versions of Java installed on your computer.
  • Click Yes when prompted. When JavaRa is done, a notice will appear that a logfile has been produced. Click OK.
  • A logfile will pop up. Please save it to a convenient location and post it in your next reply.

Next:
 
Please Run TFC by OldTimer to clear temporary files:

  • Download TFC from here and save it to your desktop.
  • http://oldtimer.geekstogo.com/TFC.exe
  • Close any open programs and Internet browsers.
  • Double click TFC.exe to run it on XP (for Vista and Windows 7 right click and choose "Run as administrator") and once it opens click on the Start button on the lower left of the program to allow it to begin cleaning.
  • Please be patient as clearing out temp files may take a while.
  • Once it completes you may be prompted to restart your computer, please RESTART the computer even if not asked.
  • Once it's finished you may delete TFC.exe from your desktop or save it for later use for the cleaning of temporary files.

Next:

Please download the attached fixlist.txt file and save it to the Desktop.
NOTE. It's important that both files, FRST or FRST64 and fixlist.txt are in the same location or the fix will not work.

NOTICE: This script was written specifically for this user, for use on this particular machine. Running this on another machine may cause damage to your operating system.

Run FRST or FRST64 and press the Fix button just once and wait.
If the tool needs a restart please make sure you let the system restart normally and let the tool complete its run after restart.
The tool will make a log on the Desktop (Fixlog.txt). Please attach or post it to your next reply.

Note: If the tool warned you about an outdated version please download and run the updated version.

 

 

fixlist.txt

Link to post
Share on other sites

Here are the attachments. The first run of JavaRA did the same thing as last time where it couldn't find JavaRA.def, but then I copied the files in a folder named RemoveJava in a different folder on my computer and it worked. Yielded the same log file though. Just explaining the log file that shows two runs of JavaRA only separated by a few minutes.

Fixlog.txt

JavaRa.log

Link to post
Share on other sites

  • Root Admin

How is the computer running now?

Are there still any signs of an infection ?

 

 

Please open Malwarebytes Anti-Malware and from the Dashboard please Check for Updates by clicking the Update Now... link
Open up Malwarebytes > Settings > Detection and Protection > Enable Scan for rootkits, Under Non Malware Protection set both PUP and PUM to Treat detections as malware.
Click on the SCAN button and run a Threat Scan with Malwarebytes Anti-Malware by clicking the Scan Now>> button. Remove any threats found
Once completed please click on the History > Application Logs and find your scan log and open it and then click on the "copy to clipboard" button and post back the results on your next reply.

 

 

 

Please download Security Check by screen317 from HERE or HERE.

  • Save it to your Desktop.
  • Double click SecurityCheck.exe and follow the onscreen instructions inside of the black box.
  • If you get Unsupported operating system. Aborting now, just reboot and try again.
  • A Notepad document should open automatically called checkup.txt.
  • Please Post the contents of that document.
  • Do Not Attach It!!!


 

Link to post
Share on other sites

Well, it turns out that the inaccessible user profile is a known issue with Windows updates, which have an unfortunate habit of making changes to your user profile. So that's fixed with a simple renaming of the user profile in the registry. For some reason this also allow Malwarebytes to run. Not sure what that was about. If Malwarebytes finds anything, I will start a new thread as it won't be relevant to this one since the symptoms would be different.

 

Thank you for all your help. My issues are resolved.

 

 

-FreeLancer

Link to post
Share on other sites

  • Root Admin

At this time there are no more signs of an infection on your system.
However if you are still seeing any signs of an infection please let me know.

Let's go ahead and remove the tools and logs we've used during this process.

Most of the tools used are potentially dangerous to use unsupervised or if ran at the wrong time.
They are often updated daily so if you went to use them again in the future they would be outdated anyways.

The following procedures will implement some cleanup procedures to remove these tools.
 
bwebb7v.jpgDownload Delfix from here and save it to your desktop. (you may already have this)

  • Ensure Remove disinfection tools is checked.
  • Click the Run button.
  • Reboot

Any other programs or logs that are still remaining, you can manually delete. (right click.....Delete)
IE: RogueKiller.exe, RKreport.txt, RK_Quarantine folder, C:\FRST folder, FRST-OlderVersion folder, MBAR folder, etc....AdwCleaner > just run the program and click uninstall.

Note:
If you used FRST and can't delete the quarantine folder:
Download the fixlist.txt to the same folder as FRST.exe.
Run FRST.exe and click Fix only once and wait
That will delete the quarantine folder created by FRST.
The rest you can manually delete.
 
 
If there are any other left over Folders, Files, Logs then you can delete them on your own.
 
Please visit the following link to see how to delete old System Restore Points. Please delete all of them and create a new one at this time.
How to Delete System Protection Restore Points in Windows 7 and Windows 8

Remove all but the most recent Restore Point on Windows XP


As Java seems to get exploited on a regular basis I advise not using Java if possible but to at least disable java in your web browsers
How do I disable Java in my web browser? - Disable Java

A lot of reading here but if you take the time to read a bit of it you'll see why/how infections and general damage are so easily inflicted on the computer. There is also advice on how to prevent it and keep the system working well. Don't forget about good, solid backups of your data to an external drive that is not connected except when backing up your data. If you leave a backup drive connected and you do get infected it can easily damage, encrypt, delete, or corrupt your backups as well and then you'd lose all data.
Nothing is 100% bulletproof but with a little bit of education you can certainly swing things in your favor.


If you're not currently using Malwarebytes Premium then you may want to consider purchasing the product which can also help greatly reduce the risk of a future infection.
 

Link to post
Share on other sites

  • Root Admin

Glad we could help. :)

If you need this topic reopened, please send a Private Message to any one of the moderating team members. Please include a link to this thread with your request. This applies only to the originator of this thread.

Other members who need assistance please start your own topic in a new thread. Thanks!

Link to post
Share on other sites

Guest
This topic is now closed to further replies.
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
Back to top
×
×
  • Create New...

Important Information

This site uses cookies - We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.