Jump to content

Recovery Options of Scheduling not working?


Recommended Posts

Sort of similar to;


 

But I don't want to hijack the thread and I'm also going to assume that "Recover if missed by" means that when it's set to 12 hours for a daily scan, if it's scheduled for 00:00 14/04/14 and you start the computer at 11:00 14/04/14, it will still do the scan for the day (13:00 14/04/14 it will not).

 

With this assumption, I'd like to report that the Recovery Option for Automated Scheduling is not working properly.


As you can see, it's missed the 11th to the 16th scans even though the computer has been on for those days (just not on or logged in around 00:00 aka 12AM).

The scan 17/04/14 was done because I did leave my computer logged on until 00:00 to test whether the scheduling actually works or not. 

The settings for this scan;


 

 

Also, you can see the "Repeats once every 0 week(s)" bug reported at (#2);


This bug seems to happen after you restart the computer. It's fine when you schedule the task, but after you restart the computer it'll say "every 0 weeks". This also happens for Reoccurance > 1 week and regardless if a Recovery Option is set.

My settings for the weekly scan;


 

 

All of my scheduled scans where created new, meaning I deleted all of the default ones and re-added the ones I desired.

Link to post
Share on other sites

Did clean install.

 

Did FRST scan after clean install.

Did mbam-check a day after (when scan no recover).

Logs attached.

 

I left my computer on overnight (starting 22:30 17/04/14), but did not log in.
I logged in at around 2:30PM, did some work until 4PM, no scans in Application Logs.

Did mbam-check, looked at Scheduler Queue, decided to add Hyper Scan at 13:00 18/04/14 with 6 hour recovery to see what nextscheduled of it was; new scan did not appear after new mbam-check. Restarted computer, new scan still did not appear in new mbam-check. Edited old scan to 6 hours, change did not reflect in new mbam-check. Reverted changes.

Added new scan at 16:20 for 16:21 17/04/14 with Recovery Option 7 hours, logged out. Logged back in at 16:26, no new scan log in Application Logs and no new Schedular Queue with new mbam-check. Deleted new scan. Gave up, new mbam-check, posting reply in thread.

FRST.txt

Addition.txt

CheckResults.txt

Link to post
Share on other sites

  • Root Admin

The computer shows signs of being infected.  There are alternate data streams assigned which is not normal and there are also proxies set. Did you set these proxies yourself?

 

FF ProfilePath: C:\Users\James\AppData\Roaming\Mozilla\Firefox\Profiles\7vw41t75.default
FF NetworkProxy: "socks", "localhost"
FF NetworkProxy: "socks_port", 8080
FF NetworkProxy: "type", 0

 

 

I would suggest following the advice from the topic here Available Assistance for Possibly Infected Computers and having one of the Experts assist you with looking into your issue.

Thanks

Link to post
Share on other sites

And about the alternate data streams, I don't know what they are, in the logs it just listed the .exes in my downloads folder. I'm pretty sure I haven't launched the "SwiftKit(Install).exe" before and I'll go delete it now since it was like from last year I started Runescape again for its world event. If I did launch it, I probably launched it sandboxed... like I launched these logging tools.

Link to post
Share on other sites

Oh yea, all three scans worked today (though 1 hour delay o.O). Like yesterday (which only 1 of the 3 scans scanned) I had my computer fully off.

I'll remake the daily Hyper Scan (for 00:00 22/04/14) and remove the Custom and Threat scans; turn my computer completely off tonight and if the scan works; the next night I'll leave my computer on but not logged in to see if it works. If it still works, probably version 2.0.1.1004 fixed it or something (I was using 2.0.1.1000 before I was instructed to do a clean install).

Link to post
Share on other sites

  • 2 weeks later...
Results time. Still using MBAM 2.0.1.1004 (no notification of updates).

Dates are in dd/mm/yy.

 

21/04/14

Made from scratch new scans; Daily Hyperscan at 12:00AM and Weekly Threatscan at 12:00AM Saturdays. Scan option screenies in Google Drive (link bellow); "HyperDaily.png" "ThreatWeekly.png".

22/04/14

Computer was off overnight. Turned on and logged into the computer later than scheduled time (10:00), ran a custom (non-scheduled) scan at 17:00, mbam-check incorrectly shows LastScanType as Hyper instead of Custom. No scheduled scans ran.

23/04/14

Computer was off overnight. Turned on and logged into the computer later than scheduled time (13:00). No scheduled scans ran. Incorrect LastScanType still persists

24/04/14

Computer was off overnight. Turned on and logged into the computer later than scheduled time (14:00). No scheduled scans ran. Incorrect LastScanType still persists.

25/04/14

Computer was off overnight. Turned on and logged into the computer earlier than scheduled time (12:00). Scheduled Hyper scan ran. mbam-check incorrectly shows LastScanType as Custom instead of Hyper.

26/04/14

Computer was on until 00:30 26/04/14. Scheduled Threat scan ran, scheduled Hyper didn't. mbam-check correctly shows LastScanType as Threat.

27/04/14

Computer was on overnight but not logged in. Was logged in for next scheduled Hyper scan which happened. mbam-check incorrectly shows LastScanType as Custom instead of Hyper.

28/04/14 - 01/05/14

Forgot about this, computer was on for all scheduled Hyper scans (scheduled range about 22:30 - 23:00). Noticed MBAM 2.0.1.1004's dashboard did not update Next Scheduled Scan (in comparison to mbam-check's log).

02/05/14

Computer was on overnight but not logged in. Logged in later than scheduled time, no scheduled scans ran.

03/05/14

Computer was on overnight but not logged in. Logged in later than scheduled time (20:50), no scheduled scans ran.

 

mbam-check logs in Google Drive. Dates are in dd/mm/yy.

 

Picture of Application Logs in Google Drive; "ApplicationLogs.png".

 

 

Google Drive;


 

If you would like the pictures and mbam-check logs as an attachment, I can post them in a new reply.

 

Link to post
Share on other sites

  • Root Admin

As I said previously. The computer shows signs of an infection. You need to have someone assist you to verify if the computer is clean or not.

Then you need to install the latest beta or there really isn't much we can do to help you as there are now a few beta releases since the version you're running that have fixed dozens of issues.

I would suggest following the advice from the topic here Available Assistance for Possibly Infected Computers and having one of the Experts assist you with looking into your issue.

Thank you again

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  • Recently Browsing   0 members

    No registered users viewing this page.

Back to top
×
×
  • Create New...

Important Information

This site uses cookies - We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.