Jump to content

for woldsweather


Recommended Posts

Hello and post-32477-1261866970.gif

 

P2P/Piracy Warning:

 

 

   

If you're using Peer 2 Peer software such as uTorrent, BitTorrent or similar you must either fully uninstall them or completely disable them from running while being assisted here.

Failure to remove or disable such software will result in your topic being closed and no further assistance being provided.

If you have illegal/cracked software, cracks, keygens etc. on the system, please remove or uninstall them now and read the policy on Piracy.

 

 

 

Do you have W8.1 installed, if so DDS is not compatible. Run the following...

 

Download Farbar Recovery Scan Tool and save it to your desktop.

 

Note: You need to run the version compatible with your system (32 bit or 64 bit). If you are not sure which version applies to your system download both of them and try to run them. Only one of them will run on your system, that will be the right version.

 

  •  

     

  • Double-click to run it. When the tool opens click Yes to disclaimer.

     

     

  • Press Scan button.

     

     

  • It will make a log (FRST.txt) in the same directory the tool is run. Please copy and paste it to your reply.

     

     

  • The first time the tool is run, it makes also another log (Addition.txt). Please attach it to your reply.

     

     

 

 

Kevin

Link to post
Share on other sites

Download attached fixlist.txt file and save it to the Desktop, or the folder you saved FRST into.

NOTE. It's important that both FRST and fixlist.txt are in the same location or the fix will not work.

 

Run FRST and press the Fix button just once and wait.

The tool will make a log on the Desktop (Fixlog.txt) or the folder it was ran from. Please post it to your reply.

 

Next,

 

Please download Malwarebytes Anti-Malware to your desktop.


Double-click mbam-setup-2.0.0.1000.exe and follow the prompts to install the program.
At the end, be sure a checkmark is placed next to the following:
Launch Malwarebytes Anti-Malware
A 14 day trial of the Premium features is pre-selected. You may deselect this if you wish, and it will not diminish the scanning and removal capabilities of the program.
Click Finish.
On the Dashboard, click the 'Update Now >>' link
After the update completes, click the 'Scan Now >>' button.
Or, on the Dashboard, click the Scan Now >> button.
If an update is available, click the Update Now button.
A Threat Scan will begin.
When the scan is complete, if there have been detections, click Apply Actions to allow MBAM to clean what was detected.
In most cases, a restart will be required.
Wait for the prompt to restart the computer to appear, then click on Yes.

 

How to get logs:

(Export log to save as txt)

 


After the restart once you are back at your desktop, open MBAM once more.
Click on the History tab > Application Logs.
Double click on the scan log which shows the Date and time of the scan just performed.
Click 'Export'.
Click 'Text file (*.txt)'
In the Save File dialog box which appears, click on Desktop.
In the File name: box type a name for your scan log.
A message box named 'File Saved' should appear stating "Your file has been successfully exported".
Click Ok
Attach that saved log to your next reply.

 

Next,

 

Download AdwCleaner by Xplode from here: http://www.bleepingcomputer.com/download/adwcleaner/ and save to your Desktop.

 


Double click on Adwcleaner.exe to run the tool.
Click on Scan
Once the scan is done, click on the Clean button.
You will get a prompt asking to close all programs. Click OK.
Click OK again to reboot your computer.
A text file will open after the restart. Please post the content of that logfile in your reply.
You can also find the logfile at C:\AdwCleaner[sn].txt.

 

Let me see those logs, also give an update on any remaining issues or concerns..

 

Kevin

 

 

fixlist.txt

Link to post
Share on other sites

You have already chosen the "Follow this Topic" option, that should generate an email when there is a new reply to your thread.....

 

Please download Malwarebytes Anti-Malware to your desktop.


Double-click mbam-setup-2.0.0.1000.exe and follow the prompts to install the program.
At the end, be sure a checkmark is placed next to the following:
Launch Malwarebytes Anti-Malware
A 14 day trial of the Premium features is pre-selected. You may deselect this if you wish, and it will not diminish the scanning and removal capabilities of the program.
Click Finish.
On the Dashboard, click the 'Update Now >>' link
After the update completes, click the 'Scan Now >>' button.
Or, on the Dashboard, click the Scan Now >> button.
If an update is available, click the Update Now button.
A Threat Scan will begin.
When the scan is complete, if there have been detections, click Apply Actions to allow MBAM to clean what was detected.
In most cases, a restart will be required.
Wait for the prompt to restart the computer to appear, then click on Yes.

 

How to get logs:

(Export log to save as txt)

 


After the restart once you are back at your desktop, open MBAM once more.
Click on the History tab > Application Logs.
Double click on the scan log which shows the Date and time of the scan just performed.
Click 'Export'.
Click 'Text file (*.txt)'
In the Save File dialog box which appears, click on Desktop.
In the File name: box type a name for your scan log.
A message box named 'File Saved' should appear stating "Your file has been successfully exported".
Click Ok
Attach that saved log to your next reply.

 

Run Eset Online Scanner

 

**Note** You will need to use Internet explorer for this scan - Vista and Windows 7/8 right click on IE shortcut and run as admin

 

Go to Eset web page http://www.eset.com/us/online-scanner/ to run an online scan from ESET.

 


Turn off the real time scanner of any existing antivirus program while performing the online scan
click on the Run ESET Online Scanner button
Tick the box next to YES, I accept the Terms of Use.
Click Start
When asked, allow the add/on to be installed
Click Start
Make sure that the option "Remove found threats"  is unticked
Click on Advanced Settings, ensure the options
Scan for potentially unwanted applications, Scan for potentially unsafe applications, and Enable Anti-Stealth Technology are ticked.
Click Scan
wait for the virus definitions to be downloaded
Wait for the scan to finish

 

When the scan is complete

 


If no threats were found
put a checkmark in "Uninstall application on close"
close program
report to me that nothing was found

 

If threats were found

 


click on "list of threats found"
click on "export to text file" and save it as ESET SCAN and save to the desktop
Click on back
put a checkmark in "Uninstall application on close"
click on finish

 

close program

 

Copy and paste the report in next reply.

 

Post those logs, also let me know if there are any remaining issues or concerns....

 

Kevin...

Link to post
Share on other sites

See if the following makes a difference with MB installation;

 

Please download RKill from here: http://www.bleepingcomputer.com/download/rkill/

 

There are three buttons to choose from with different names on, select the first one and save it to your desktop.

 

  • Double-click on the Rkill desktop icon to run the tool.
  • If using Vista or Windows 7, right-click on it and Run As Administrator.
  • A black DOS box will briefly flash and then disappear. This is normal and indicates the tool ran successfully.
  • A log pops up at the end of the run. This log file is located at C:\rkill.log. Please post this in your next reply.
  • If you do not see the black box flash on the screen delete the icon from the desktop and go back to the link for the download, select the next button and try to run the tool again, continue to repeat this process using the remaining buttons until the tool runs. You will find further links if you scroll down the page with other names, try them one at a time.
  • If the tool does not run from any of the links provided, please let me know.

 

Kevin

Link to post
Share on other sites

I assume Malwarebytes didn`t install again.. OK run the following;

 

Please download RogueKiller from here:

 

http://www.sur-la-toile.com/RogueKiller/RogueKiller.exe  <- 32 bit version

http://www.sur-la-toile.com/RogueKiller/RogueKillerX64.exe  <- 64 bit version

                                   

  • Make sure to get the correct version for your system.
  • Quit all running programs
  • Please disconnect any USB or external drives from the computer before you run this scan!
  • For Vista/Seven, right click -> run as administrator, for XP simply run RogueKiller.exe
  • Wait until Prescan has finished...
  • The following EULA will appear, please select accept
     
    RKLicence.png
     
  • Ensure MBR scan, Check faked and AntiRootkit are checked
  • Select Scan
     
    RK1A.png
     
  • When the scan completes select Report, copy and paste that to your reply.
     
    RK2A.png
     
  • The log should be found in RKreport[?].txt on your Desktop
  • Exit/Close RogueKiller

Link to post
Share on other sites

 

Again this had previously been run and the report pasted here.

 

You have mentioned that quote a couple of times, when/where were the tools run before before? you say "here" but where... If there has been a similar set of instructions run previously can you please post the link to that thread, I really need to see what has been done previously....

 

Go back to reply #9, follow the instructions for ESET online scan, post that log...

Link to post
Share on other sites

Running RKill and RogueKiller appear only once in this thread, that is in a reply made by me, you say they appear further up the thread, I definitely do not see a previous request or see any previous logs?

 

Continue as follows please:

 

download Portable Windows Repair (all in one) from one of the following:

 

http://www.tweaking.com/content/page/windows_repair_all_in_one.html

http://www.majorgeeks.com/Tweaking.com_-_Windows_Repair_Portable_d7222.html

http://www.bleepingcomputer.com/download/windows-repair-all-in-one-portable/

 

Unzip the contents into a newly created folder on your desktop.

 

Open the folder, run the tool by right click on Repair_Windows (icon with red briefcase) select "Run as Administrator"

 

 

Tweak1_zps10f67b3e.jpg

 

 

From the main GUI do the following:

 

 

Select Tab 2 and allow it to run Disk check

 

 

Tweak2_zps947b9008.jpg

 

 

Select Tab 3 and allow it to run SFC

 

 

Tweak3_zps64a1b448.jpg

 

 

Select Tab 4 and Create System Restore Point

 

 

Tweak4_zps98ef6707.jpg

 

 

Select Repairs tab => Click the Start

 

 

Tweak5_zps71b85f1c.jpg

 

 

The repairs window will open, Check the boxes as indicated, also the "Restart" options, the select Start...

 

 

Tweak9a.jpg

 

 

DON'T use the computer while each scan is in progress.

 

Post the log, to access select "settings" tab > "open log folder" tab, log will be named _Windows_Repair_Log

 

Next,

 

Se if Malwarebytes will now install correctly..

 

Kevin

Link to post
Share on other sites

Run the following:

 

Download Services Repair tool, available here - http://kb.eset.com/library/ESET/KB%20Team%20Only/Malware/ServicesRepair.exe and Save it to your Desktop. Right click on it and select Run As Administrator, follow the prompts. It should reboot when it finishes. If not reboot it yourself.

 

Next,

 

Run the system filer checker, this will find and repair any corrupt system files. Reboot when done. Instructions here: http://support.microsoft.com/kb/929833

 

Try malwarebytes when done. If still no change check to installed programs list via Programs and Features, is Malwarebytes listed?

 

Thanks,

 

Kevin

Link to post
Share on other sites

All done and still cant install malwarebytes . <bytes not listed in programs and features but then most installed programs aren't listed. They disappeared when all this started though they still work if I have a shortcut for them, they aren't in start menu either. All programs except those beginning with Mi to Mo vanished. Anything I installed after they disappeared is showing there.

Link to post
Share on other sites

Guest
This topic is now closed to further replies.
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
Back to top
×
×
  • Create New...

Important Information

This site uses cookies - We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.