Jump to content

Recommended Posts

Last month, I had an infection on my computer which was removed with MS System Restore & Rouge Killer. This month, I attempted (for the first time) to create a Network Share on my home PC through my wireless ADSL router (which is connected via Ethernet) to view & transfer files with on my Android phone. When I tried to enable Network Discovery & FIle Sharing in  Network Connections (in Control Panel), I was getting errors about the device / service being unavailable. I am relatively new at this networking stuff, so I googled the problem.

 

I ended up copying several batch, OTL, and registry fixes, as well as running ComboFix (at the end) from this thread: https://forums.malwarebytes.org/index.php?showtopic=115712

 

I know it probably wasn't the best idea running OTL / registry fixes intended for someone else. It did solve most of the problems on my end with the Networking sutff not turning on & off...now I can do all that. Everything APPEARS to be working normally now in Vista, and ComboFix went through about 60 stages and said I had a particularly bad RootKit infection, which (supposedly) was removed.

 

Now, the Network sharres I succesfully created in Vista are actually not showing up in ES File Explorer. My computer doesn't show up when searching the network at all. Then, my Eye-FI SDHC card (which I used on this computer all the time) suddenly can no longer can send files to this computer. Itstill  works fine on my Laptop on the same Wifi network, so I know it isn't the card. ALso, a message popped up out of the blue a few days ago saying my computer has the same IP address as another computer on this network...never saw that before or after.

 

 I tried resettingthe WIndows Firewall with netsh advfirewall  /re3set but it didnt help . DDS log fiels are attached.

attach.txt

dds.txt

Link to post
Share on other sites

  • Root Admin

Hello and :welcome:

Please read the following and post back the logs

General P2P/Piracy Warning:
 

 
If you're using
Peer 2 Peer
software such as
uTorrent, BitTorrent
or similar you must either fully uninstall them or completely disable them from running while being assisted here.

Failure to remove or disable such software will result in your topic being closed and no further assistance being provided.

If you have
illegal/cracked software, cracks, keygens etc
. on the system, please remove or uninstall them now and read the policy on
Piracy
.




Before we proceed further, please read all of the following instructions carefully.
If there is anything that you do not understand kindly ask before proceeding.
If needed please print out these instructions.
  • Please do not post logs using CODE, QUOTE, or FONT tags. Just paste them as direct text.
  • If the log is too large then you can use attachments by clicking on the More Reply Options button.
  • Please enable your system to show hidden files: How to see hidden files in Windows
  • Make sure you're subscribed to this topic:
    • Click on the Follow This Topic Button (at the top right of this page), make sure that the Receive notification box is checked and that it is set to Instantly

    [*]Removing malware can be unpredictable...It is unlikely but things can go very wrong! Please make sure you Backup all files that cannot be replaced if something were to happen. You can copy them to a CD/DVD, external drive or a pen drive [*]Please don't run any other scans, download, install or uninstall any programs unless requested by me while I'm working with you. [*]The removal of malware is not instantaneous, please be patient. Often we are also on a different Time Zone. [*]Perform everything in the correct order. Sometimes one step requires the previous one. [*]If you have any problems while following my instructions, Stop there and tell me the exact nature of the issue. [*]You can check here if you're not sure if your computer is 32-bit or 64-bit [*]Please disable your antivirus while running any requested scanners so that they do not interfere with the scanners. [*]When we are done, I'll give you instructions on how to cleanup all the tools and logs [*]Please stick with me until I give you the "all clear" and Please don't waste my time by leaving before that. [*]Your topic will be closed if you haven't replied within 3 days [*](If I have not responded within 24 hours, please send me a Private Message as a reminder)




STEP 0
RKill is a program that was developed at BleepingComputer.com that attempts to terminate known malware processes
so that your normal security software can then run and clean your computer of infections.
When RKill runs it will kill malware processes and then removes incorrect executable associations and fixes policies
that stop us from using certain tools. When finished it will display a log file that shows the processes that were
terminated while the program was running.

As RKill only terminates a program's running process, and does not delete any files, after running it you should not reboot
your computer as any malware processes that are configured to start automatically will just be started again.
Instead, after running RKill you should immediately scan your computer using the requested scans I've included.

Please download Rkill by Grinler from one of the links below and save it to your desktop.


Link 2

  • On Windows XP double-click on the Rkill desktop icon to run the tool.
  • On Windows Vista/Windows 7 or 8, right-click on the Rkill desktop icon and select Run As Administrator
  • A black DOS box will briefly flash and then disappear. This is normal and indicates the tool ran successfully.
  • If not, delete the file, then download and use the one provided in Link 2.
  • If it does not work, repeat the process and attempt to use one of the remaining links until the tool runs.
  • If the tool does not run from any of the links provided, please let me know.
  • Do not reboot the computer, you will need to run the application again.



STEP 01
Backup the Registry:
Modifying the Registry can create unforeseen problems, so it always wise to create a backup before doing so.

  • Please download ERUNT from one of the following links: Link1 | Link2 | Link3
  • ERUNT (Emergency Recovery Utility NT) is a free program that allows you to keep a complete backup of your registry and restore it when needed.
  • Double click on erunt-setup.exe to Install ERUNT by following the prompts.
  • NOTE: Do not choose to allow ERUNT to add an Entry to the Startup folder. Click NO.
  • Start ERUNT either by double clicking on the desktop icon or choosing to start the program at the end of the setup process.
  • Choose a location for the backup.
    • Note: the default location is C:\Windows\ERDNT which is acceptable.

    [*]Make sure that at least the first two check boxes are selected. [*]Click on OK [*]Then click on YES to create the folder. [*]Note: if it is necessary to restore the registry, open the backup folder and start ERDNT.exe


STEP 02
Please download RogueKiller and save it to your desktop.

You can check here if you're not sure if your computer is 32-bit or 64-bit

  • RogueKiller 32-bit | RogueKiller 64-bit
  • Quit all running programs.
  • For Windows XP, double-click to start.
  • For Vista,Windows 7/8, Right-click on the program and select Run as Administrator to start and when prompted allow it to run.
  • Read and accept the EULA (End User Licene Agreement)
  • Click Scan to scan the system.
  • When the scan completes Close the program > Don't Fix anything!
  • Don't run any other options, they're not all bad!!
  • Post back the report which should be located on your desktop.


 

Link to post
Share on other sites

Thanks for you help! I've attached the RougeKiller log, and I ran all 3 programs.

 

Right now I have Network Discovery turned to "off", as I'm mainly trying to fix whatever has caused my Eye-FI card to stop uploading files to this PC. As I previously mentioned, the card & router work fine with the laptop and it only just stopped working on the PC after the malware removal and recent network configuration changes. I have tried everything with the firewall as well as resetting the IP stack, and I suspect that some [networking] service is disabled or misconfigured which is blocking the packets.

RKreport0_S_01172014_011413.txt

Link to post
Share on other sites

  • Root Admin

Okay that looks all right.  Let's go ahead and run through a list of tools to ensure that there are no lingering issues that might be related to malware.

 

Please go ahead and run through the following steps and post back the logs when ready.

STEP 03
Please download Malwarebytes Anti-Rootkit from here

  • Unzip the contents to a folder in a convenient location.
  • Open the folder where the contents were unzipped and run mbar.exe
  • Follow the instructions in the wizard to update and allow the program to scan your computer for threats.
  • Click on the Cleanup button to remove any threats and reboot if prompted to do so.
  • Wait while the system shuts down and the cleanup process is performed.
  • Perform another scan with Malwarebytes Anti-Rootkit to verify that no threats remain. If they do, then click Cleanup once more and repeat the process.
  • When done, please post the two logs produced they will be in the MBAR folder... mbar-log.txt and system-log.txt

STEP 04
Please download Junkware Removal Tool to your desktop.


  • Shutdown your antivirus to avoid any conflicts.
  • Right click over JRT.exe and select Run as administrator on Windows Vista or Windows 7, double-click on XP.
  • The tool will open and start scanning your system.
  • Please be patient as this can take a while to complete.
  • On completion, a log (JRT.txt) is saved to your desktop and will automatically open.
  • Post the contents of JRT.txt into your next reply message
  • When completed make sure to re-enable your antivirus

STEP 05
Lets clean out any adware now: (this will require a reboot so save all your work)

Please download AdwCleaner by Xplode and save to your Desktop.


  • Double click on AdwCleaner.exe to run the tool.
    Vista/Windows 7/8 users right-click and select Run As Administrator
  • Click on the Scan button.
  • AdwCleaner will begin...be patient as the scan may take some time to complete.
  • When it's done you'll see: Pending: Please uncheck elements you don't want removed.
  • Now click on the Report button...a logfile (AdwCleaner[R0].txt) will open in Notepad for review.
  • Look over the log especially under Files/Folders for any program you want to save.
  • If there's a program you may want to save, just uncheck it from AdwCleaner.
  • If you're not sure, post the log for review. (all items found are adware/spyware/foistware)
  • If you're ready to clean it all up.....click the Clean button.
  • After rebooting, a logfile report (AdwCleaner[s0].txt) will open automatically.
  • Copy and paste the contents of that logfile in your next reply.
  • A copy of that logfile will also be saved in the C:\AdwCleaner folder.
  • Items that are deleted are moved to the Quarantine Folder: C:\AdwCleaner\Quarantine
  • To restore an item that has been deleted:
  • Go to Tools > Quarantine Manager > check what you want restored > now click on Restore.

Then..................

Open up Malwarebytes > Settings Tab > Scanner Settings > Under action for PUP > Select: Show in Results List and Check for removal.

Please Update and run a Quick Scan with Malwarebytes Anti-Malware, post the report.

Make sure that everything is checked, and click Remove Selected.


STEP 06
button_eos.gif

Please go here to run the online antivirus scannner from ESET.

  • Turn off the real time scanner of any existing antivirus program while performing the online scan
  • Tick the box next to YES, I accept the Terms of Use.
  • Click Start
  • When asked, allow the activex control to install
  • Click Start
  • Make sure that the option Remove found threats is unticked
  • Click on Advanced Settings and ensure these options are ticked:
    • Scan for potentially unwanted applications
    • Scan for potentially unsafe applications
    • Enable Anti-Stealth Technology
  • Click Scan
  • Wait for the scan to finish
  • If any threats were found, click the 'List of found threats' , then click Export to text file....
  • Save it to your desktop, then please copy and paste that log as a reply to this topic.

STEP 07
Please download the Farbar Recovery Scan Tool and save it to your desktop.

Note: You need to run the version compatibale with your system. You can check here if you're not sure if your computer is 32-bit or 64-bit


  • Double-click to run it. When the tool opens click Yes to disclaimer.
  • Press the Scan button.
  • It will make a log (FRST.txt) in the same directory the tool is run. Please copy and paste it to your reply.
  • The first time the tool is run, it also makes another log (Addition.txt). Please attach it to your reply as well.

 

 

Link to post
Share on other sites

Hi, thanks for your help! I've run steps 3 - 5, and now am on step 6 (ESET) which should be complete soon. I will post the logs from that & Farbar once they are done. AdwCleaner found an empty directory called C:\Windows\System32\bProtectorForWindows, containing another (empty) folder called "2.2.453.59." (dated 7/8/12). I made a copy of the empty folder in my "Logs" directory, & ESET found the empty folders & said 1 file is probably a variant of Win32/bProtector.A.

mbar-log-2014-01-17 (02-45-35).txt

system-log.txt

JRT.txt

AdwCleanerS0.txt

mbam-log-2014-01-17 (03-23-21).txt

Link to post
Share on other sites

  • Root Admin

Please uninstall ALL versions of Java from your Control Panel, Add/Remove and then run the following.

 

 

Please download JavaRa-1.16 and save it to your computer.

  • Double click to open the zip file and then select all and choose Copy.
  • Create a new folder on your Desktop named RemoveJava and paste the files into this new folder.
  • Quit all browsers and other running applications.
  • Right-click on JavaRa.exe in RemoveJava folder and choose Run as administrator to start the program.
  • From the drop-down menu, choose English and click on Select.
  • JavaRa will open; click on Remove Older Versions to remove the older versions of Java installed on your computer.
  • Click Yes when prompted. When JavaRa is done, a notice will appear that a logfile has been produced. Click OK.
  • A logfile will pop up. Please save it to a convenient location and post it in your next reply.


 

 

Next, Please download the attached fixlist.txt file and save it to the Desktop.
NOTE. It's important that both files, FRST or FRST64 and fixlist.txt are in the same location or the fix will not work.

NOTICE: This script was written specifically for this user, for use on this particular machine. Running this on another machine may cause damage to your operating system.

Run FRST or FRST64 and press the Fix button just once and wait.
If the tool needs a restart please make sure you let the system restart normally and let the tool complete its run after restart.
The tool will make a log on the Desktop (Fixlog.txt). Please attach or post it to your next reply.

Note: If the tool warned you about an outdated version please download and run the updated version.
 

fixlist.txt

Link to post
Share on other sites

  • Root Admin

Okay now that we've got that bit cleaned up let me have you go ahead and delete your current copy of Combofix and then download a new fresh copy and run it and then post back the new log.

 

Please visit this webpage and read the ComboFix User's Guide:

  • Once you've read the article and are ready to use the program you can download it directly from the link below.
  • Important! - Please make sure you save combofix to your desktop and do not run it from your browser
  • Direct download link for: ComboFix.exe
  • Please make sure you disable your security applications before running ComboFix.
  • Once Combofix has completed it will produce and open a log file.  Please be patient as it can take some time to load.
  • Please attach that log file to your next reply.
  • If needed the file can be located here:  C:\combofix.txt
  • NOTE: If you receive the message "illegal operation has been attempted on a registry key that has been marked for deletion", just reboot the computer.


 

Link to post
Share on other sites

Thanks so much for your curtious help here with these issues, I truely appreciate it!

 

At this point, I'm not entirely sure the two networking problems are directly related...my Eye-Fi card stopped working with this computer right after I ran ComboFix and some other fixes last week. I've downloaded the card log, and it's probing the various IP addresses on my home network (192.168.1.x) when there are pictures to send for the Eye-FI Listener Engine, but it's not receiving a response on this computer. I've tried everything where the Firewall policies are concerned, and have reinstalled the EYe-Fi software numerous times.

 

The other problem is my network shares not showing up...more specifically, the computer itself (192.168.1.6) is not even showing up on the network when I search for it in ES File Explorer, but my HP WiFi printer (192.168.1.3) is. I logged my router for local errors (debug mode), and it keeps displaying a radvd syntax error about every 6 seconds...it might be this computer trying (unsuccessfully) to broadcast the IP address on the network.

 

Jan 18 21:20:28 daemon warn radvd[456]: sendmsg: Invalid argument Jan 18 21:20:37 daemon warn radvd[456]: sendmsg: Invalid argument Jan 18 21:20:43 daemon warn radvd[456]: sendmsg: Invalid argument
Link to post
Share on other sites

  • Root Admin

Due to the lack of feedback this topic is closed to prevent others from posting here. If you need this topic reopened, please send a Private Message to any one of the moderating team members. Please include a link to this thread with your request. This applies only to the originator of this thread.

Other members who need assistance please start your own topic in a new thread. Thanks!

Link to post
Share on other sites

Guest
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
Back to top
×
×
  • Create New...

Important Information

This site uses cookies - We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.