Jump to content

Malwarebytes crashes during scan: Logs attached


Recommended Posts

Hello, my first post here!

 

Recently I updated my Intel RST drivers, and since then my Windows 7 x64 PC crashes like every 30 minutes, even in a safe mode (or in a boot with a minimum services enabled).  I tried sfc /scannow, which said it fixed some but could not fix all the issues,  Running Malaewarebytes (the latest version with updated db) crashes after a few minutes, even in a quick scan.

 

I have attached the logs per similar thread advice.  Thanks in advance for your help!

attach.txt

CheckResults.txt

dds.txt

Link to post
Share on other sites

  • Root Admin

Hello and :welcome:

General P2P/Piracy Warning:
 

 
If you're using
Peer 2 Peer
software such as
uTorrent, BitTorrent
or similar you must either fully uninstall them or completely disable them from running while being assisted here.

Failure to remove or disable such software will result in your topic being closed and no further assistance being provided.

If you have
illegal/cracked software, cracks, keygens etc
. on the system, please remove or uninstall them now and read the policy on
Piracy
.




Before we proceed further, please read all of the following instructions carefully.
If there is anything that you do not understand kindly ask before proceeding.
If needed please print out these instructions.
  • Please do not post logs using CODE, QUOTE, or FONT tags. Just paste them as direct text.
  • If the log is too large then you can use attachments by clicking on the More Reply Options button.
  • Please enable your system to show hidden files: How to see hidden files in Windows
  • Make sure you're subscribed to this topic:
    • Click on the Follow This Topic Button (at the top right of this page), make sure that the Receive notification box is checked and that it is set to Instantly

    [*]Removing malware can be unpredictable...It is unlikely but things can go very wrong! Please make sure you Backup all files that cannot be replaced if something were to happen. You can copy them to a CD/DVD, external drive or a pen drive [*]Please don't run any other scans, download, install or uninstall any programs unless requested by me while I'm working with you. [*]The removal of malware is not instantaneous, please be patient. Often we are also on a different Time Zone. [*]Perform everything in the correct order. Sometimes one step requires the previous one. [*]If you have any problems while following my instructions, Stop there and tell me the exact nature of the issue. [*]You can check here if you're not sure if your computer is 32-bit or 64-bit [*]Please disable your antivirus while running any requested scanners so that they do not interfere with the scanners. [*]When we are done, I'll give you instructions on how to cleanup all the tools and logs [*]Please stick with me until I give you the "all clear" and Please don't waste my time by leaving before that. [*]Your topic will be closed if you haven't replied within 3 days [*](If I have not responded within 24 hours, please send me a Private Message as a reminder)




STEP 0
RKill is a program that was developed at BleepingComputer.com that attempts to terminate known malware processes
so that your normal security software can then run and clean your computer of infections.
When RKill runs it will kill malware processes and then removes incorrect executable associations and fixes policies
that stop us from using certain tools. When finished it will display a log file that shows the processes that were
terminated while the program was running.

As RKill only terminates a program's running process, and does not delete any files, after running it you should not reboot
your computer as any malware processes that are configured to start automatically will just be started again.
Instead, after running RKill you should immediately scan your computer using the requested scans I've included.

Please download Rkill by Grinler from one of the links below and save it to your desktop.


Link 2

  • On Windows XP double-click on the Rkill desktop icon to run the tool.
  • On Windows Vista/Windows 7 or 8, right-click on the Rkill desktop icon and select Run As Administrator
  • A black DOS box will briefly flash and then disappear. This is normal and indicates the tool ran successfully.
  • If not, delete the file, then download and use the one provided in Link 2.
  • If it does not work, repeat the process and attempt to use one of the remaining links until the tool runs.
  • If the tool does not run from any of the links provided, please let me know.
  • Do not reboot the computer, you will need to run the application again.



STEP 01
Backup the Registry:
Modifying the Registry can create unforeseen problems, so it always wise to create a backup before doing so.

  • Please download ERUNT from one of the following links: Link1 | Link2 | Link3
  • ERUNT (Emergency Recovery Utility NT) is a free program that allows you to keep a complete backup of your registry and restore it when needed.
  • Double click on erunt-setup.exe to Install ERUNT by following the prompts.
  • NOTE: Do not choose to allow ERUNT to add an Entry to the Startup folder. Click NO.
  • Start ERUNT either by double clicking on the desktop icon or choosing to start the program at the end of the setup process.
  • Choose a location for the backup.
    • Note: the default location is C:\Windows\ERDNT which is acceptable.

    [*]Make sure that at least the first two check boxes are selected. [*]Click on OK [*]Then click on YES to create the folder. [*]Note: if it is necessary to restore the registry, open the backup folder and start ERDNT.exe


STEP 02
Please download RogueKiller and save it to your desktop.

You can check here if you're not sure if your computer is 32-bit or 64-bit

  • RogueKiller 32-bit | RogueKiller 64-bit
  • Quit all running programs.
  • For Windows XP, double-click to start.
  • For Vista,Windows 7/8, Right-click on the program and select Run as Administrator to start and when prompted allow it to run.
  • Read and accept the EULA (End User Licene Agreement)
  • Click Scan to scan the system.
  • When the scan completes Close the program > Don't Fix anything!
  • Don't run any other options, they're not all bad!!
  • Post back the report which should be located on your desktop.


 

Link to post
Share on other sites

  • Root Admin

Please go ahead and run through the following steps and post back the logs when ready.

STEP 03
Please download Malwarebytes Anti-Rootkit from here

  • Unzip the contents to a folder in a convenient location.
  • Open the folder where the contents were unzipped and run mbar.exe
  • Follow the instructions in the wizard to update and allow the program to scan your computer for threats.
  • Click on the Cleanup button to remove any threats and reboot if prompted to do so.
  • Wait while the system shuts down and the cleanup process is performed.
  • Perform another scan with Malwarebytes Anti-Rootkit to verify that no threats remain. If they do, then click Cleanup once more and repeat the process.
  • When done, please post the two logs produced they will be in the MBAR folder... mbar-log.txt and system-log.txt

STEP 04
Please download Junkware Removal Tool to your desktop.
  • Shutdown your antivirus to avoid any conflicts.
  • Right click over JRT.exe and select Run as administrator on Windows Vista or Windows 7, double-click on XP.
  • The tool will open and start scanning your system.
  • Please be patient as this can take a while to complete.
  • On completion, a log (JRT.txt) is saved to your desktop and will automatically open.
  • Post the contents of JRT.txt into your next reply message
  • When completed make sure to re-enable your antivirus



STEP 05
Lets clean out any adware now: (this will require a reboot so save all your work)

Please download AdwCleaner by Xplode and save to your Desktop.

  • Double click on AdwCleaner.exe to run the tool.
    Vista/Windows 7/8 users right-click and select Run As Administrator
  • Click on the Scan button.
  • AdwCleaner will begin...be patient as the scan may take some time to complete.
  • When it's done you'll see: Pending: Please uncheck elements you don't want removed.
  • Now click on the Report button...a logfile (AdwCleaner[R0].txt) will open in Notepad for review.
  • Look over the log especially under Files/Folders for any program you want to save.
  • If there's a program you may want to save, just uncheck it from AdwCleaner.
  • If you're not sure, post the log for review. (all items found are adware/spyware/foistware)
  • If you're ready to clean it all up.....click the Clean button.
  • After rebooting, a logfile report (AdwCleaner[s0].txt) will open automatically.
  • Copy and paste the contents of that logfile in your next reply.
  • A copy of that logfile will also be saved in the C:\AdwCleaner folder.
  • Items that are deleted are moved to the Quarantine Folder: C:\AdwCleaner\Quarantine
  • To restore an item that has been deleted:
  • Go to Tools > Quarantine Manager > check what you want restored > now click on Restore.


Then..................

Open up Malwarebytes > Settings Tab > Scanner Settings > Under action for PUP > Select: Show in Results List and Check for removal.

Please Update and run a Quick Scan with Malwarebytes Anti-Malware, post the report.

Make sure that everything is checked, and click Remove Selected.


STEP 06
button_eos.gif

Please go here to run the online antivirus scannner from ESET.

  • Turn off the real time scanner of any existing antivirus program while performing the online scan
  • Tick the box next to YES, I accept the Terms of Use.
  • Click Start
  • When asked, allow the activex control to install
  • Click Start
  • Make sure that the option Remove found threats is unticked
  • Click on Advanced Settings and ensure these options are ticked:
    • Scan for potentially unwanted applications
    • Scan for potentially unsafe applications
    • Enable Anti-Stealth Technology

    [*]Click Scan [*]Wait for the scan to finish [*]If any threats were found, click the 'List of found threats' , then click Export to text file.... [*]Save it to your desktop, then please copy and paste that log as a reply to this topic.



STEP 07
Please download the Farbar Recovery Scan Tool and save it to your desktop.

Note: You need to run the version compatibale with your system. You can check here if you're not sure if your computer is 32-bit or 64-bit

  • Double-click to run it. When the tool opens click Yes to disclaimer.
  • Press the Scan button.
  • It will make a log (FRST.txt) in the same directory the tool is run. Please copy and paste it to your reply.
  • The first time the tool is run, it also makes another log (Addition.txt). Please attach it to your reply as well.


 

Link to post
Share on other sites

Thanks.  The Files are attached.

 

I couldn't finish the step #6as the computer crashed, with the eventid showing the following SideBySide error:

Event ID: 80

Activation context generation failed for "C:\Users\XXXXX\AppData\Local\Microsoft\Windows\Temporary Internet Files\Content.IE5\OTWU1BB0\esetsmartinstaller_enu.exe".Error in manifest or policy file "" on line . A component version required by the application conflicts with another component version already active. Conflicting components are:. Component 1: C:\Windows\WinSxS\manifests\amd64_microsoft.windows.common-controls_6595b64144ccf1df_6.0.7601.17514_none_fa396087175ac9ac.manifest. Component 2: C:\Windows\WinSxS\manifests\x86_microsoft.windows.common-controls_6595b64144ccf1df_6.0.7601.17514_none_41e6975e2bd6f2b2.manifest.

 

JRT.txt

mbar-log-2014-01-05 (12-28-37).txt

mbar-log-2014-01-05 (13-26-20).txt

system-log.txt

AdwCleanerR0.txt

AdwCleanerS0.txt

Link to post
Share on other sites

  • Root Admin

NOTE: I will be going on vacation for a few days starting Jan 8 so we need to hurry and finish up here.

 

Please run a Full Disk Check on your system drive.  If needed here are some links on how to run a Disk Check.

On Windows 7 the disk check log is in the Event Logs under Application with a heading source of  Wininit

How to Run Disk Check in Windows 7

How to Run Check Disk at Startup in Vista or Windows 7

How to Read the Event Viewer Log for Check Disk (chkdsk) in Vista, Windows 7, and Windows 8

Then post back the Event Log results for the disk check.

Next,

Please Run TFC by OldTimer to clear temporary files:

  • Download TFC from here and save it to your desktop.
  • http://oldtimer.geekstogo.com/TFC.exe
  • Close any open programs and Internet browsers.
  • Double click TFC.exe to run it on XP (for Vista and Windows 7 right click and choose "Run as administrator") and once it opens click on the Start button on the lower left of the program to allow it to begin cleaning.
  • Please be patient as clearing out temp files may take a while.
  • Once it completes you may be prompted to restart your computer, please do so.
  • Once it's finished you may delete TFC.exe from your desktop or save it for later use for the cleaning of temporary files.
Link to post
Share on other sites

The disk check was done (the log is below).  The TFC program was also run.

 

CHKDSK is verifying files (stage 1 of 3)...
  227328 file records processed.                                          File verification completed.
  1009 large file records processed.                                      0 bad file records processed.                                        2 EA records processed.                                              74 reparse records processed.                                       CHKDSK is verifying indexes (stage 2 of 3)...
  293942 index entries processed.                                         Index verification completed.
  0 unindexed files scanned.                                           0 unindexed files recovered.                                       CHKDSK is verifying security descriptors (stage 3 of 3)...
  227328 file SDs/SIDs processed.                                         Cleaning up 45 unused index entries from index $SII of file 0x9.
Cleaning up 45 unused index entries from index $SDH of file 0x9.
Cleaning up 45 unused security descriptors.
Security descriptor verification completed.
  33308 data files processed.                                            CHKDSK is verifying Usn Journal...
  34682040 USN bytes processed.                                             Usn Journal verification completed.
Windows has checked the file system and found no problems.
 
  92322815 KB total disk space.
  54042124 KB in 160321 files.
     99752 KB in 33309 indexes.
         0 KB in bad sectors.
    332631 KB in use by the system.
     65536 KB occupied by the log file.
  37848308 KB available on disk.
 
      4096 bytes in each allocation unit.
  23080703 total allocation units on disk.
   9462077 allocation units available on disk.
Link to post
Share on other sites

  • 2 weeks later...
  • Root Admin

Due to the lack of feedback this topic is closed to prevent others from posting here. If you need this topic reopened, please send a Private Message to any one of the moderating team members. Please include a link to this thread with your request. This applies only to the originator of this thread.

Other members who need assistance please start your own topic in a new thread. Thanks!

Link to post
Share on other sites

Guest
This topic is now closed to further replies.
 Share

  • Recently Browsing   0 members

    No registered users viewing this page.

Back to top
×
×
  • Create New...

Important Information

This site uses cookies - We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.