Jump to content

Recommended Posts

Welcome to the forum.

Please download and run RogueKiller 32 Bit to your desktop.

RogueKiller 64 Bit <---use this one for 64 bit systems

Which system am I using?

Quit all running programs.

For Windows XP, double-click to start.

For Vista or Windows 7-8, do a right-click on the program, select Run as Administrator to start, & when prompted Allow to run.

Click Scan to scan the system.

When the scan completes > Close out the program > Don't Fix anything!

Don't run any other options, they're not all bad!!!!!!!

Post back the report which should be located on your desktop.

(please don't put logs in code or quotes and use the default font)

General P2P/Piracy Warning:

1. If you're using Peer 2 Peer software such uTorrent, BitTorrent or similar you must either fully uninstall it or completely disable it from running while being assisted here.

Failure to remove or disable such software will result in your topic being closed and no further assistance being provided.

2. If you have illegal/cracked software, cracks, keygens, custom (Adobe) host file, etc. on the system, please remove or uninstall them now and read the policy on Piracy.

Failure to remove such software will result in your topic being closed and no further assistance being provided.

MrC

Note:

Please read all of my instructions completely including these.

Make sure system restore is turned on and running

Make sure you're subscribed to this topic: Click on the Follow This Topic Button (at the top right of this page), make sure that the Receive notification box is checked and that it is set to Instantly

Removing malware can be unpredictable...unlikely but things can go very wrong! Backup any files that cannot be replaced. You can copy them to a CD/DVD, external drive or a pen drive

<+>Please don't run any other scans, download, install or uninstall any programs while I'm working with you.

<+>The removal of malware isn't instantaneous, please be patient.

<+>When we are done, I'll give to instructions on how to cleanup all the tools and logs

<+>Please stick with me until I give you the "all clear" and Please don't waste my time by leaving before that.

------->Your topic will be closed if you haven't replied within 3 days!<--------

(If I don't respond within 24 hours, please send me a PM)

Link to post
Share on other sites

RogueKiller V8.8.0 _x64_ [Dec 27 2013] by Tigzy
mail : tigzyRK<at>gmail<dot>com
Feedback : http://www.adlice.com/forum/
Website : http://www.adlice.com/softwares/roguekiller/
Blog : http://www.adlice.com

Operating System : Windows 7 (6.1.7601 Service Pack 1) 64 bits version
Started in : Normal mode
User : Owner [Admin rights]
Mode : Scan -- Date : 01/02/2014 16:59:42
| ARK || FAK || MBR |

¤¤¤ Bad processes : 0 ¤¤¤

¤¤¤ Registry Entries : 3 ¤¤¤
[HJ SMENU][PUM] HKCU\[...]\Advanced : Start_ShowMyGames (0) -> FOUND
[HJ DESK][PUM] HKLM\[...]\NewStartPanel : {59031a47-3f72-44a7-89c5-5595fe6b30ee} (1) -> FOUND
[HJ DESK][PUM] HKLM\[...]\NewStartPanel : {20D04FE0-3AEA-1069-A2D8-08002B30309D} (1) -> FOUND

¤¤¤ Scheduled tasks : 1 ¤¤¤
[V1][ROGUE ST] GS.Enabler-S-4560858878.job : c:\programdata\quickset\gs.enabler\GS.Enabler.exe - /schedule /profile "c:\programdata\quickset\gs.enabler\4560858878.ini" [x][-] -> FOUND

¤¤¤ Startup Entries : 0 ¤¤¤

¤¤¤ Web browsers : 0 ¤¤¤

¤¤¤ Browser Addons : 0 ¤¤¤

¤¤¤ Particular Files / Folders: ¤¤¤

¤¤¤ Driver : [NOT LOADED 0x0] ¤¤¤

¤¤¤ External Hives: ¤¤¤

¤¤¤ Infection :  ¤¤¤

¤¤¤ HOSTS File: ¤¤¤
--> %SystemRoot%\System32\drivers\etc\hosts




¤¤¤ MBR Check: ¤¤¤

+++++ PhysicalDrive0: (\\.\PHYSICALDRIVE0 @ IDE) ST3750640AS ATA Device +++++
--- User ---
[MBR] 883dcb592c30f1b2c8c7f9d249982125
[bSP] d03a418a7de72448a4be06e61f9d5c69 : Windows 7/8 MBR Code
Partition table:
0 - [ACTIVE] NTFS (0x07) [VISIBLE] Offset (sectors): 2048 | Size: 100 Mo
1 - [XXXXXX] NTFS (0x07) [VISIBLE] Offset (sectors): 206848 | Size: 715302 Mo
User = LL1 ... OK!
User = LL2 ... OK!

Finished : << RKreport[0]_S_01022014_165942.txt >>



 

Link to post
Share on other sites

Run RogueKiller again and click Scan
When the scan completes > click on the Registry tab
Put a check next to all of these and uncheck the rest: (if found)
 

[V1][ROGUE ST] GS.Enabler-S-4560858878.job : c:\programdata\quickset\gs.enabler\GS.Enabler.exe - /schedule /profile "c:\programdata\quickset\gs.enabler\4560858878.ini" [x][-] -> FOUND


Now click Delete on the right hand column under Options

-------------

Then............

Download Malwarebytes Anti-Rootkit from HERE

  • Unzip the contents to a folder in a convenient location.
  • Open the folder where the contents were unzipped and run mbar.exe
  • Follow the instructions in the wizard to update and allow the program to scan your computer for threats.
  • Click on the Cleanup button to remove any threats and reboot if prompted to do so.
  • Wait while the system shuts down and the cleanup process is performed.
  • Perform another scan with Malwarebytes Anti-Rootkit to verify that no threats remain. If they do, then click Cleanup once more and repeat the process.
  • When done, please post the two logs produced they will be in the MBAR folder..... mbar-log.txt and system-log.txt

To attach a log if needed:

Bottom right corner of this page.
reply1.jpg

New window that comes up.
replyer1.jpg

~~~~~~~~~~~~~~~~~~~~~~~

Note:
If no additional threats were found, verify that your system is now running normally, making sure that the following items are functional:
Internet access
Windows Update
Windows Firewall

If there are additional problems with your system, such as any of those listed above or other system issues, then run the fixdamage tool included with Malwarebytes Anti-Rootkit and reboot. It's located in the Plugins folder which is in the MBAR folder.

Just run fixdamage.exe.

Verify that they are now functioning normally.


MrC

Link to post
Share on other sites

Try this one:

Please read the directions carefully so you don't end up deleting something that is good!!

If in doubt about an entry....please ask or choose Skip!!!!

Don't Delete anything unless instructed to!

If you get the warning about a file UnsignedFile.Multi.Generic or LockedFile.Multi.Generic please choose

Skip and click on Continue

If a suspicious object is detected, the default action will be Skip, click on Continue

Please note that TDSSKiller can be run in safe mode if needed.

Please download the latest version of TDSSKiller from HERE and save it to your Desktop.

  • Doubleclick on TDSSKiller.exe to run the application, then click on Change parameters.

    image000q.png

  • Put a checkmark beside loaded modules.

    2012081514h0118.png

  • A reboot will be needed to apply the changes. Do it.
  • TDSSKiller will launch automatically after the reboot. Also your computer may seem very slow and unusable. This is normal. Give it enough time to load your background programs.
  • Then click on Change parameters in TDSSKiller.
  • Check all boxes then click OK.

    clip.jpg

  • Click the Start Scan button.

    19695967.jpg

  • The scan should take no longer than 2 minutes.
  • If a suspicious object is detected, the default action will be Skip, click on Continue.

    67776163.jpg

    Any entries like this: \Device\Harddisk0\DR0 ( TDSS File System ) - please choose Skip.

    If in doubt about an entry....please ask or choose Skip

  • If malicious objects are found, they will show in the Scan results - Select action for found objects and offer three options.

    Ensure Cure (default) is selected, then click Continue > Reboot now to finish the cleaning process.

    62117367.jpg

    Note: If Cure is not available, please choose Skip instead, do not choose Delete unless instructed.

  • A report will be created in your root directory, (usually C:\ folder) in the form of "TDSSKiller.[Version]_[Date]_[Time]_log.txt". Please copy and paste the contents of that file here. There may be 3 logs > so post or attach all of them.
  • Sometimes these logs can be very large, in that case please attach it or zip it up and attach it.

Here's a summary of what to do if you would like to print it out:

If in doubt about an entry....please ask or choose Skip

Don't Delete anything unless instructed to!

If a suspicious object is detected, the default action will be Skip, click on Continue

If you get the warning about a file UnsignedFile.Multi.Generic or LockedFile.Multi.Generic please choose

Skip and click on Continue

Any entries like this: \Device\Harddisk0\DR0 ( TDSS File System ) - please choose Skip.

If malicious objects are found, they will show in the Scan results and offer three (3) options.

Ensure Cure is selected, then click Continue => Reboot now to finish the cleaning process.

Note: If Cure is not available, please choose Skip instead, do not choose Delete unless instructed.

~~~~~~~~~~~~~~~~~~~~

You can attach the logs if they're too long:

Bottom right corner of this page.

reply1.jpg

New window that comes up.

replyer1.jpg

MrC

Link to post
Share on other sites

Due to the lack of feedback this topic is closed to prevent others from posting here. If you need this topic reopened, please send a Private Message to any one of the moderating team members. Please include a link to this thread with your request. This applies only to the originator of this thread.

Other members who need assistance please start your own topic in a new thread. Thanks!

Link to post
Share on other sites

Guest
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
Back to top
×
×
  • Create New...

Important Information

This site uses cookies - We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.