Jump to content

Mbamgui.exe is not runing, and mbam systemtray icon is missing


Recommended Posts

Welcome to the forum, please start HERE

Post back the 2 logs here.....DDS.txt and Attach.txt

(please don't put logs in code or quotes and use the default font)

General P2P/Piracy Warning:

1. If you're using Peer 2 Peer software such uTorrent, BitTorrent or similar you must either fully uninstall it or completely disable it from running while being assisted here.

Failure to remove or disable such software will result in your topic being closed and no further assistance being provided.

2. If you have illegal/cracked software, cracks, keygens, custom (Adobe) host file, etc. on the system, please remove or uninstall them now and read the policy on Piracy.

Failure to remove such software will result in your topic being closed and no further assistance being provided.

<====><====><====><====><====><====><====><====>

Next................

Please download and run RogueKiller 32 bit to your desktop.

RogueKiller<---use this one for 64 bit systems

Which system am I using?

Quit all running programs.

For Windows XP, double-click to start.

For Vista or Windows 7-8, do a right-click on the program, select Run as Administrator to start, & when prompted Allow to run.

Click Scan to scan the system.

When the scan completes > Close out the program > Don't Fix anything!

Don't run any other options, they're not all bad!!!!!!!

Post back the report which should be located on your desktop.

(please don't put logs in code or quotes and use the default font)

MrC

Note:

Please read all of my instructions completely including these.

Make sure system restore is turned on and running

Make sure you're subscribed to this topic: Click on the Follow This Topic Button (at the top right of this page), make sure that the Receive notification box is checked and that it is set to Instantly

Removing malware can be unpredictable...unlikely but things can go very wrong! Backup any files that cannot be replaced. You can copy them to a CD/DVD, external drive or a pen drive

<+>Please don't run any other scans, download, install or uninstall any programs while I'm working with you.

<+>The removal of malware isn't instantaneous, please be patient.

<+>When we are done, I'll give to instructions on how to cleanup all the tools and logs

<+>Please stick with me until I give you the "all clear" and Please don't waste my time by leaving before that.

------->Your topic will be closed if you haven't replied within 3 days!<--------

(If I don't respond within 24 hours, please send me a PM)

Link to post
Share on other sites

Not much showing, lets run some scans.

First:

Download Malwarebytes Anti-Rootkit from HERE

  • Unzip the contents to a folder in a convenient location.
  • Open the folder where the contents were unzipped and run mbar.exe
  • Follow the instructions in the wizard to update and allow the program to scan your computer for threats.
  • Click on the Cleanup button to remove any threats and reboot if prompted to do so.
  • Wait while the system shuts down and the cleanup process is performed.
  • Perform another scan with Malwarebytes Anti-Rootkit to verify that no threats remain. If they do, then click Cleanup once more and repeat the process.
  • When done, please post the two logs produced they will be in the MBAR folder..... mbar-log.txt and system-log.txt
To attach a log if needed:

Bottom right corner of this page.

reply1.jpg

New window that comes up.

replyer1.jpg

~~~~~~~~~~~~~~~~~~~~~~~

Note:

If no additional threats were found, verify that your system is now running normally, making sure that the following items are functional:

Internet access

Windows Update

Windows Firewall

If there are additional problems with your system, such as any of those listed above or other system issues, then run the fixdamage tool included with Malwarebytes Anti-Rootkit and reboot. It's located in the Plugins folder which is in the MBAR folder.

Just run fixdamage.exe.

Verify that they are now functioning normally.

MrC

Link to post
Share on other sites

Please download and run ComboFix.

The most important things to remember when running it is to disable all your malware programs and run Combofix from your desktop.

Please visit this webpage for download links, and instructions for running ComboFix

http://www.bleepingcomputer.com/combofix/how-to-use-combofix

Please make sure you click download buttons that look similar to this, not "sponsored ad links":

bleep-crop.jpg

Ensure you have disabled all anti virus and anti malware programs so they do not interfere with the running of ComboFix.

Information on disabling your malware programs can be found Here.

Make sure you run ComboFix from your desktop.

Give it at least 30-45 minutes to finish if needed.

Please include the C:\ComboFix.txt in your next reply for further review.

---------->NOTE<----------

If you get the message Illegal operation attempted on registry key that has been marked for deletion after you run ComboFix....please reboot the computer, this should resolve the problem. You may have to do this several times if needed.

MrC

Link to post
Share on other sites

Just to inform you, that when i stop the AV or FW or Updates, a warning baloon does not appear in the system tray.

 

Open up the Security Center in your control panel > Under Resources > Change the way the Security Center alerts me > make any changes there.

-----------------------------------------

Re-install Malwarebytes:

If you have the pro version of MB....make sure you have your license key

-----------------------

Go to your control panels add/remove programs and uninstall MalwareBytes Anti-Malware > reboot

Download and run this cleaner:

mbam-clean.exe

Reboot <---very important

Now download and see if you can install the latest version of MB from here: (disable any malware/anti-virus programs running first)

http://fileforum.betanews.com/detail/Malwarebytes-AntiMalware/1186760019/1

Then.........

Lets clean out any adware/spyware now: (this will require a reboot so save all your work)

Please download AdwCleaner by Xplode and save to your Desktop.

Make sure you click on download buttons that look similar to this, not "sponsored ad links":

bleep-crop.jpg

  • Double click on AdwCleaner.exe to run the tool.

    Vista/Windows 7/8 users right-click and select Run As Administrator

  • Click on the Scan button.
  • AdwCleaner will begin...be patient as the scan may take some time to complete.
  • When it's done you'll see: Pending: Please uncheck elements you don't want removed.
  • Now click on the Report button...a logfile (AdwCleaner[R0].txt) will open in Notepad for review.
  • Look over the log especially under Files/Folders for any program you want to save.
  • If there's a program you may want to save, just uncheck it from AdwCleaner.
  • If you're not sure, post the log for review. (all items found are adware/spyware/foistware)
  • If you're ready to clean it all up.....click the Clean button.
  • After rebooting, a logfile report (AdwCleaner[s0].txt) will open automatically.
  • Copy and paste the contents of that logfile in your next reply.
  • A copy of that logfile will also be saved in the C:\AdwCleaner folder.
  • Items that are deleted are moved to the Quarantine Folder: C:\AdwCleaner\Quarantine
  • To restore an item that has been deleted:
  • Go to Tools > Quarantine Manager > check what you want restored > now click on Restore.
Then..................

Open up Malwarebytes > Settings Tab > Scanner Settings > Under action for PUP > Select: Show in Results List and Check for removal.

Please Update and run a Quick Scan with Malwarebytes Anti-Malware, post the report.

Make sure that everything is checked, and click Remove Selected.

Please let me know how computer is running now, MrC

Link to post
Share on other sites

Please download Farbar Service Scanner and run it on the computer with the issue.

  • Make sure the following options are checked:
    • Internet Services
    • Windows Firewall
    • System Restore
    • Security Center
    • Windows Update
    • Windows Defender
  • Press "Scan".
  • It will create a log (FSS.txt) in the same directory the tool is run.
  • Please copy and paste the log to your reply.
MrC
Link to post
Share on other sites

  • Root Admin

Due to the lack of feedback this topic is closed to prevent others from posting here. If you need this topic reopened, please send a Private Message to any one of the moderating team members. Please include a link to this thread with your request. This applies only to the originator of this thread.

Other members who need assistance please start your own topic in a new thread. Thanks!

Link to post
Share on other sites

Guest
This topic is now closed to further replies.
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
Back to top
×
×
  • Create New...

Important Information

This site uses cookies - We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.