Jump to content

Can't get website Blocking to run


manwoodsal
 Share

Recommended Posts

FRom the protection-log file

 

2013/09/10 17:48:53 -0500    TB-DESKTOP    Travis    MESSAGE    Starting protection
2013/09/10 17:48:53 -0500    TB-DESKTOP    Travis    MESSAGE    Protection started successfully
2013/09/10 17:48:53 -0500    TB-DESKTOP    Travis    MESSAGE    Starting IP protection
2013/09/10 17:48:53 -0500    TB-DESKTOP    Travis    ERROR    IP protection failed:  FwpmEngineOpen0 failed with error code 1753
2013/09/10 17:48:54 -0500    TB-DESKTOP    Travis    MESSAGE    Starting IP protection
2013/09/10 17:48:54 -0500    TB-DESKTOP    Travis    ERROR    IP protection failed:  FwpmEngineOpen0 failed with error code 1753

Link to post
Share on other sites

  • Root Admin

Hello and :welcome:

 

Please go ahead and run through the following steps and post back the logs when ready.

STEP 03
Please download Malwarebytes Anti-Rootkit from here

  • Unzip the contents to a folder in a convenient location.
  • Open the folder where the contents were unzipped and run mbar.exe
  • Follow the instructions in the wizard to update and allow the program to scan your computer for threats.
  • Click on the Cleanup button to remove any threats and reboot if prompted to do so.
  • Wait while the system shuts down and the cleanup process is performed.
  • Perform another scan with Malwarebytes Anti-Rootkit to verify that no threats remain. If they do, then click Cleanup once more and repeat the process.
  • When done, please post the two logs produced they will be in the MBAR folder... mbar-log.txt and system-log.txt

STEP 04
Please download Junkware Removal Tool to your desktop.
  • Shutdown your antivirus to avoid any conflicts.
  • Right click over JRT.exe and select Run as administrator on Windows Vista or Windows 7, double-click on XP.
  • The tool will open and start scanning your system.
  • Please be patient as this can take a while to complete.
  • On completion, a log (JRT.txt) is saved to your desktop and will automatically open.
  • Post the contents of JRT.txt into your next reply message
  • When completed make sure to re-enable your antivirus



STEP 05
Please download AdwCleaner by Xplode and save to your Desktop.

  • Double click on AdwCleaner.exe to run the tool.
  • Click on the Scan button.
  • AdwCleaner will begin...be patient as the scan may take some time to complete.
  • After the scan has finished, click on the Report button...a logfile (AdwCleaner[R0].txt) will open in Notepad for review.
  • The contents of the log file may be confusing. Unless you see a program name that you know should not be removed, don't worry about it. If you see an entry you want to keep, let me know about it.
  • Copy and paste the contents of that logfile in your next reply.
  • A copy of all logfiles are saved in the C:\AdwCleaner folder which was created when running the tool.



STEP 06
button_eos.gif

Please go here to run the online antivirus scannner from ESET.
  • Turn off the real time scanner of any existing antivirus program while performing the online scan
  • Tick the box next to YES, I accept the Terms of Use.
  • Click Start
  • When asked, allow the activex control to install
  • Click Start
  • Make sure that the option Remove found threats is unticked
  • Click on Advanced Settings and ensure these options are ticked:
    • Scan for potentially unwanted applications
    • Scan for potentially unsafe applications
    • Enable Anti-Stealth Technology

    [*]Click Scan [*]Wait for the scan to finish [*]If any threats were found, click the 'List of found threats' , then click Export to text file.... [*]Save it to your desktop, then please copy and paste that log as a reply to this topic.



STEP 07
Please download the Farbar Recovery Scan Tool and save it to your desktop.

Note: You need to run the version compatibale with your system. You can check here if you're not sure if your computer is 32-bit or 64-bit

  • Double-click to run it. When the tool opens click Yes to disclaimer.
  • Press the Scan button.
  • It will make a log (FRST.txt) in the same directory the tool is run. Please copy and paste it to your reply.
  • The first time the tool is run, it also makes another log (Addition.txt). Please attach it to your reply as well.


 

Link to post
Share on other sites

  • Root Admin

Actually the computer is looking reasonably good in the current logs.

 

Please uninstall ALL versions of Java and then run the following.

 

 

Please download the attached fixlist.txt file and save it to the Desktop.
NOTE. It's important that both files, FRST or FRST64 and fixlist.txt are in the same location or the fix will not work.

NOTICE: This script was written specifically for this user, for use on this particular machine. Running this on another machine may cause damage to your operating system.

Run FRST or FRST64 and press the Fix button just once and wait.
If the tool needs a restart please make sure you let the system restart normally and let the tool complete its run after restart.
The tool will make a log on the Desktop (Fixlog.txt). Please attach or post it to your next reply.

Note: If the tool warned you about an outdated version please download and save a new copy to your computer and quit your browser.  Do not run the updated version from your browser.
 

fixlist.txt

Link to post
Share on other sites

  • Root Admin

Please download MiniToolBox save it to your desktop and run it.

Checkmark the following check-boxes:

  • Flush DNS
  • Report IE Proxy Settings
  • Reset IE Proxy Settings
  • Report FF Proxy Settings
  • Reset FF Proxy Settings
  • List content of Hosts
  • List IP configuration
  • List Winsock Entries
  • List last 10 Event Viewer log
  • List Installed Programs
  • List Devices
  • List Users, Partitions and Memory size.
  • List Minidump Files


Click Go and post the result (Result.txt). A copy of Result.txt will be saved in the same directory the tool is run.

Note: When using Reset FF Proxy Settings option Firefox should be closed.
 

Link to post
Share on other sites

  • Root Admin

From STEP 3 for MBAR please look in that folder and you'll find a folder called Plugins then inside that folder is a file called FIXDAMAGE.EXE

 

Please right click over that file and choose Run as administrator and then reboot the computer.

 

Then run the following.

 

ESET Services Repair


Please download the ESET services repair from here and save the file to your desktop.
On XP double click to run it.  On Vista/Win7/Win8 please right click and choose "Run as administrator"
Once the tool has finished please restart the computer.
 

Then reboot the computer 2 more times and run the MiniToolBox scanner again and post back a NEW log.

Link to post
Share on other sites

  • Root Admin

Please create an mbam-check log:

  • Download mbam-check.exe from here and save it to your desktop
  • Double-click on mbam-check.exe to run it, it should then open a log file
  • Please do not copy and paste the entire contents of the log into your next post, instead please attach the log CheckResults.txt file which should now be located on your desktop to your next post


 

 

I'm going to be on the road but will try to check back on you a bit later tonight.

Link to post
Share on other sites

  • Root Admin

So is the Protection Module for MBAM working now?

 

Please download Security Check from here or here.

  • Save it to your Desktop.
  • Double click SecurityCheck.exe and follow the onscreen instructions inside of the black box.
  • A Notepad document should open automatically called checkup.txt; please post the contents of that document.


 

Link to post
Share on other sites

  • Root Admin

At this time there are no more signs of an infection on your system.
However if you are still seeing any signs of an infection please let me know.

Let's go ahead and remove the tools and logs we've used during this process.

Most of the tools used are potentially dangerous to use unsupervised or if ran at the wrong time.
They are often updated daily so if you went to use them again in the future they would be outdated anyways.

The following procedures will implement some cleanup procedures to remove these tools.
It will also reset your System Restore by flushing out previous restore points and create a new restore point.
It will also remove all the backups our tools may have created.

Uninstall ComboFix (if used):

  • Turn off all active protection software including your antivirus.
  • Push the "Windows key" + "R" (between the "Ctrl" button and "Alt" Button)
  • Please copy and past the following into the box ComboFix /Uninstall and click OK.
  • Note the space between the X and the /Uninstall, it needs to be there.

CF-Uninstall.png

Remove the rest of the tools used:



Please download
OTCleanIt
and save it to your Desktop. This tool will remove all the tools we used to clean your pc.

  • Double-click OTCleanIt.exe.
  • Click the CleanUp! button.
  • Select Yes when the "Begin cleanup Process?" prompt appears.
  • If you are prompted to Reboot during the cleanup, select Yes.
  • The tool will delete itself once it finishes, if not go ahead and delete it by yourself.
  • If asked to restart the computer, please do so


Note:

If you receive a warning from your firewall or other security programs regarding
OTCleanIt
attempting to contact the internet, please allow it to do so.


AdwCleaner Removal:
  • Double click on AdwCleaner.exe to run the tool.
  • Click on Uninstall
  • Confirm with Yes

ESET antivirus Removal:
  • This tool can be uninstalled via the Control Panel, Programs, Uninstall


If there are any other left over Folders, Files, Logs then you can delete them on your own.

Please visit the following link to see how to delete old System Restore Points. Please delete all of them and create a new one at this time.
How to Delete System Protection Restore Points in Windows 7 and Windows 8

Remove all but the most recent Restore Point on Windows XP


As Java seems to get exploited on a regular basis I advise not using Java if possible but to at least disable java in your web browsers
How do I disable Java in my web browser? - Disable Java

A lot of reading here but if you take the time to read a bit of it you'll see why/how infections and general damage are so easily inflicted on the computer. There is also advice on how to prevent it and keep the system working well. Don't forget about good, solid backups of your data to an external drive that is not connected except when backing up your data. If you leave a backup drive connected and you do get infected it can easily damage, encrypt, delete, or corrupt your backups as well and then you'd lose all data.
Nothing is 100% bulletproof but with a little bit of education you can certainly swing things in your favor.


 
If you're not currently using Malwarebytes PRO then you may want to consider purchasing the product which can also help greatly reduce the risk of a future infection.
 

Link to post
Share on other sites

  • Root Admin

Glad we could help. :)

If you need this topic reopened, please send a Private Message to any one of the moderating team members. Please include a link to this thread with your request. This applies only to the originator of this thread.

Other members who need assistance please start your own topic in a new thread. Thanks!

Link to post
Share on other sites

Guest
This topic is now closed to further replies.
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
Back to top
×
×
  • Create New...

Important Information

This site uses cookies - We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.