Jump to content

Ukash malware Unable to boot using safe mode


Recommended Posts

OK, so how did you get FRST to run and scan????

----------------------------

Here's the Fix: This is for W7 though!!!

OK, here you go......Please carefully carry out this procedure!!!!!!

Please download the attached fixlist.txt and copy it to your flashdrive.

NOTICE: This script was written specifically for this user, for use on that particular machine. Running this on another machine may cause damage to your operating system

On Vista or Windows 7: Now please enter System Recovery Options. (as you did before)

Run FRST64 or FRST (which ever one you're using) and press the Fix button just once and wait.

The tool will make a log on the flashdrive (Fixlog.txt) please post it to your reply.

See if the computer boots normally now.

MrC

Link to post
Share on other sites

The friends are a couple of thousand miles away, so I'm not sure if I remember exactly what I told them. Basically I had them boot to the boot menu, then selected command prompt (w/o network support). They have a laptop which is running, so I had them download frst.exe and save it on a thumbdrive. They put the thumbdrive in the infected computer and ran f:\frst.exe and did "scan." I had them remove the thumbdrive and put it back in the laptop and asked them to email it to me. When I looked over the txt file I could see registry stuff I would delete, and files/folders that looked questionable. But since I am not at the computer I didn't want to take any chances.

I will send them the fixlist.txt file and report back with a fixlog.txt file as soon as I can.

Thanks

Jim

Link to post
Share on other sites

Well Done....We should follow up with so other scans to make sure the system is clean:

Welcome to the forum, please start at the link below:

http://forums.malwar...?showtopic=9573

Post back the 2 logs here.....DDS.txt and Attach.txt

(please don't put logs in code or quotes)

P2P Warning:

If you're using Peer 2 Peer software such uTorrent, BitTorrent or similar you must either fully uninstall it or completely disable it from running while being assisted here.

Failure to remove or disable such software will result in your topic being closed and no further assistance being provided.

<====><====><====><====><====><====><====><====>

Next................

Please remove any usb or external drives from the computer before you run this scan!

Please download and run RogueKiller 32 bit to your desktop.

RogueKiller<---use this one for 64 bit systems

Quit all running programs.

For Windows XP, double-click to start.

For Vista or Windows 7-8, do a right-click on the program, select Run as Administrator to start, & when prompted Allow to run.

Click Scan to scan the system.

When the scan completes > Close out the program > Don't Fix anything!

Don't run any other options, they're not all bad!!!!!!!

Post back the report which should be located on your desktop.

(please don't put logs in code or quotes)

MrC

Note:

Make sure you're subscribed to this topic:
Click on the
Follow This Topic Button
(at the top right of this page), make sure that the
Receive notification
box is checked and that it is set to
Instantly

Removing malware can be unpredictable
...things can go very wrong!
Backup
any files that cannot be replaced. You can copy them to a CD/DVD, external drive or a pen drive

<+>
Please don't run any other scans, download, install or uninstall any programs while I'm working with you.

<+>The removal of malware isn't instantaneous, please be patient.

<+>
Please stick with me until I give you the "all clear".

------->Your topic will be closed if you haven't replied within 3 days!<--------

(If I don't respond within 24 hours, please send me a PM)

Link to post
Share on other sites

No DDS.txt and Attach.txt logs???

Let them do this:

Download Malwarebytes Anti-Rootkit from HERE

  • Unzip the contents to a folder in a convenient location.
  • Open the folder where the contents were unzipped and run mbar.exe
  • Follow the instructions in the wizard to update and allow the program to scan your computer for threats.
  • Click on the Cleanup button to remove any threats and reboot if prompted to do so.
  • Wait while the system shuts down and the cleanup process is performed.
  • Perform another scan with Malwarebytes Anti-Rootkit to verify that no threats remain. If they do, then click Cleanup once more and repeat the process.
  • When done, please post the two logs produced they will be in the MBAR folder..... mbar-log.txt and system-log.txt

To attach a log if needed:

Bottom right corner of this page.

more-reply-options.jpg

New window that comes up.

choose-files1.jpg

~~~~~~~~~~~~~~~~~~~~~~~

Note:

If no additional threats were found, verify that your system is now running normally, making sure that the following items are functional:

Internet access

Windows Update

Windows Firewall

If there are additional problems with your system, such as any of those listed above or other system issues, then run the fixdamage tool included with Malwarebytes Anti-Rootkit and reboot.

Verify that your system is now functioning normally.

MrC

Link to post
Share on other sites

OK...Next:

Please download and run ComboFix.

The most important things to remember when running it is to disable all your malware programs and run Combofix from your desktop.

Please visit this webpage for download links, and instructions for running ComboFix

http://www.bleepingcomputer.com/combofix/how-to-use-combofix

Ensure you have disabled all anti virus and anti malware programs so they do not interfere with the running of ComboFix.

Information on disabling your malware programs can be found Here.

Make sure you run ComboFix from your desktop.

Give it at least 30-45 minutes to finish if needed.

Please include the C:\ComboFix.txt in your next reply for further review.

---------->NOTE<----------

If you get the message Illegal operation attempted on registry key that has been marked for deletion after you run ComboFix....please reboot the computer, this should resolve the problem. You may have to do this several times if needed.

MrC

Link to post
Share on other sites

Guest
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
Back to top
×
×
  • Create New...

Important Information

This site uses cookies - We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.